空间结构耦合模态控制及实验研究

智能结构以主动元件为传感器和驱动器,根据结构的动态响应和控制要求,自适应地改变结构的动态性能,实现结构特性的自调节功能,以增强结构适应于外界环境变化的能力.结构振动主动控制方法中常用的模态空间控制方法,就是将系统方程转化到模态坐标下,从而得到内部解耦的以模态坐标表示的方程组,然后根据一定的控制方法,计算出模态控制力,实现实时控制.该方法计算简单,效率高,能满足实时控制的需要.本文根据一个三层智能结构主动控制实验,介绍了耦合模态控制理论及实现方法,设计并阐述了压电主元杆件的工作原理,根据Riccati方程得到了主元杆件的最优布置.通过对实验数据运用五点滑动平均平滑法进行处理分析及频谱分析可以看到,智能结构通过主动控制,对相应的控制模态位移及加速度有很大的抑制作用,对应的模态阻尼系数得到了不同程度的提高.     

Tracking lubricants during single screw extrusion of uPVC

Lubrication is one of the most important parameters in unplasticized polyvinyl chloride (uPVC) processing apart from the PVC resin and processing equipment. Lubricants are used in specific ratios to ensure effective fusion of PVC particles. The exact mechanism on how these lubricants interact is not yet fully understood. A widely accepted theory is the interaction mechanism proposed by Rabinovic et al. where lubricants are said to act as surfactants and slip agents. In this study a method for tracking lubricants, by simulating the extrusion process within a single screw extruder, was proposed. A three stage fusion simulation consisted of the feeding zone (stage 1), the compression zone (stage 2) and the metering zone (stage 3). The association interactions between the individual components of a typical uPVC formulation were followed throughout the three stages. External polar and nonpolar lubricants in combination with an internal lubricant was studied. Lubricants were successfully tracked using scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS). In conclusion it was found that the use of an internal lubricant promotes dispersion of external lubrication towards PVC. It was also found that there is a competition between the internal lubricant and polar external lubricant.     

压电堆叠作动器的对称性求解

研究了压电堆叠作动器的对称性,并给出了系统存在的守恒量和对称性解.以轴向运动的压电堆叠作动器为研究对象,根据其结构特点,选取位移和磁链作为广义坐标,运用能量方法,建立了压电堆叠作动器的Lagrange(拉格朗日)方程.引入位移和磁链广义坐标的无限小群变换,分别研究了压电堆叠作动器的Noether对称性和Lie对称性,给出了广义Noether恒等式、广义Killing方程、广义Noether定理和Lie定理,计算了压电堆叠作动器存在的Noether对称性和Lie对称性的生成元,并给出了相应系统存在的守恒量.最后,利用得到的守恒量,给出了压电堆叠作动器对称性解,并计算了在控制电压变化的情况下位移和速度的动态响应曲线.     

Nonlinear impedances of thermoacoustic stacks with ordered and disordered structures

Nonlinear impedances of two thermoacoustic stacks with ordered structures （plate-type and pipe-type） and one with a disordered structure （copper mesh） are studied. The linear resistances, nonlinear coefficients and effective acoustic masses of the stacks are extracted from the experimental results based on an analogical model of nonlinear impedances of porous materials. The resistance and nonlinear coefficient of the disordered stack are found to be much larger than those of the ordered stacks, which have similar volume porosities. In the ordered stacks, the resistance is only marginally influenced by the length of the stack, while in the disordered stack, the resistance increases significantly with the length. These charac- teristics of the impedances of ordered and disordered stacks are explained with the minor loss theory and the tortuosity of a stack.     

On particle–particle interactions in solid,non-conducting impurity removalSur l'interaction particule–particule lors de l'extraction d'impuretés solides isolantes

A whole boundary-integral formulation is proposed to determine the rigid-body motions of two solid and insulating particles, freely-suspended in a metal liquid and subject to uniform ambient electric and magnetic fields. As revealed by our numerical results, particle–particle interactions may become significant for close enough bodies. To cite this article: A. Sellier, C. R. Mecanique 331 (2003).     

Determination of Interlaminar Stresses in Bending Problems for a Stack of Transversely Isotropic Plates

A mechanical and mathematical bending model for a stack of transversely isotropic plates is developed. The resolving equations for deflections and tangential displacements are supplemented with a system of differential equations for normal and tangential contact stresses. It is demonstrated that for stacks consisting of an arbitrary number of identical plates with no friction between them, the initial system of equations for contact stresses can be reduced to Helmholtz equations. This transition allows obtaining the complete eigenvalue spectrum for the Laplasian of the problem and, in special cases, eigenfunctions. They are Krylov functions when bending is cylindrical and Bessel functions when bending is axisymmetric     

Longitudinal ultrasonic vibration assisted guillotining of stacked paper

Ultrasonic vibration assisted cutting is a complex process with high dynamics. The interaction between cutting tool and workpiece is of key interest to understand the entire process. Experimental investigations are limited by the dynamics of the measurement system, and thus appropriately modeling of the ultrasonic vibration assisted cutting process is essential. In this investigation, a dynamic model regarding the ultrasonic vibration assisted guillotining of stacked paper sheets is developed. A Kelvin–Voigt material model, representing the individual sheets, is chosen, with its stiffness and damping parameters being empirically determined. A novel measurement strategy for studying the contact time and interaction between cutting tool and workpiece is introduced. It allows the verification of the highly dynamic behavior of the developed model. With the dynamic model, the experimentally observed cutting forces can be calculated. It is found that the dynamic forces cause a quicker failure of the material, which leads to a lower compression of the stack prior to reaching the critical cutting force.     

多层轴向绝缘堆的电压电流测量

为获取初级试验平台(PTS)装置分层真空轴向绝缘堆的电压电流,设计、标定了微分型电容分压器和微分环。探头的频响实验表明:绝缘堆电压、电流探头的频响上限分别为270MHz和100MHz。两种探头均采用在线标定方法来确定幅值灵敏度系数。电压探头在标定时应当保留绝缘堆外侧的水介质,以保证探头附近电场分布不发生改变。PTS装置的实验结果表明:当装置外围馈入电流基本均匀时,绝缘堆电压电流测量结果与相关测试结果自洽,与理论值基本符合;当馈入绝缘堆的电流分布不均匀时,不同角向探头测量结果的偏差导致总电流计算结果的误差较大。     

A step towards the electrophotonic nose: integrating 1D photonic crystals with organic light‐emitting diodes and photodetectors

An innovative integrated sensing platform for the detection of various chemical analytes via translating the photonic stop‐band shift of a one‐dimensional photonic crystal (PC) into an electrical current change is proposed. The miniaturized sensing platform features an organic light‐emitting diode (OLED) as a light source and an organic photodetector (OPD) as a light sensor and allows for the detection of ethanol vapor concentrations down to ≈ 10 parts per million (ppm) in nitrogen, which corresponds to a stop‐band shift of ≈ 27 pm. The resolution of the proposed platform exceeds the capabilities of most commercial spectrometers and by far the human eye, while, at the same time, such a sensor is less expensive and less power consuming than a spectrometer. The presented setup is generic and can detect optical changes in the transmission of PCs, which can be induced by both vapor adsorption or by a liquid analyte, as demonstrated with a microfluidic setup.     

Comprehensive on-line HPLC-GC for screening potential migrants from polypropylene into food: The effect of pulsed light decontamination as an example

High performance liquid chromatography (HPLC) was used for the fractionation of extracts from polypropylene (PP) films and coupled on-line to gas chromatography (GC) with automated transfer of the complete HPLC fractions (comprehensive on-line HPLC-GC, i.e. HPLCxGC). Flame ionization detection (FID) was used for the estimation of concentrations, mass spectrometry (MS) for identification work. This method was applied to investigate whether pulsed light (PL) treatment for the microbiological decontamination of polypropylene packaging materials produces reaction products requiring an evaluation to meet regulatory requirements. To demonstrate the safety of PL treatments with regard to the formation of reaction products, i.e. that no component is formed that could endanger human health, basically comprehensive analysis of components potentially migrating into food is required, but comprehensiveness cannot be proven and remains an approximation. The threshold concentration in the film was estimated either from the conventional European non-detection limit of 0.01 mg/kg food or the concept of the threshold of toxicological concern (TTC) for an unknown substance, i.e. an exposure to 0.15 μg per person and day. PL treatment of the films containing Irgafos 168 produced several new components exceeding these limits, i.e. a toxicological safety assessment would probably be required. No such peaks were detected for Tinuvin 326, Irganox 1076 and Chimassorb 81. No degradation of the polymer was detected.