Synthesis and Structure of a Manganese(Ⅱ) Complex: [Mn2·(dinitrobenzoic acid)4·(1,10-phen)2]n

The title compound, [Mn2·(dinitrobenzoic acid)4·(1,10-phen)2]n, has a linear chain structure containing binuclear [Mn2·(dinitrobenzoic acid)4(1,10-phen)2] repeat units. It crystallizes in the triclinic system, space group P1- with a = 7.9261(8), b = 12.1329(15), c = 14.847(2)(A), α = 103.845(5), β =101.424(5), γ= 92.618(4)°, Mr= 657.37, V= 1352.3(2) (A)3, Z = 2, Dc= 1.614 g/cm3, F(000) = 666, μ =0.567 mm-1, the final R = 0.0407 and wR = 0.1015 for 4081 observed reflections with I ＞ 2σ(Ⅰ). The Mn atom is six-coordinated by two N and four O atoms, forming a slightly distorted octahedral geometry. All Mn-O and Mn-N bond distances range from 2.093(2) to 2.310(2)(A). Two adjacent octahedral units are bridged together by two pairs of bi-monodentate carboxyl groups of different dinitrobenzoic acids to form an eight-membered ring with chair-typed configuration, thus generating a one-dimensional chain along the a axis.     

过氧化物模拟酶在介体型生物传感器方面应用初探

meso-四(4-磺基苯)卟啉锰(Ⅲ)作为过氧化物模拟酶可催化H_2O_2与K_4Fe(CN)_6反应。电流响应与H_2O_2浓度在3.0×10~(-4)～1.0×10~(-3)mol/L范围内呈线性关系。重现性和回收率良好。抗坏血酸和DL-半胱氨酸干扰严重。     

草酸锰分解过程的机理函数判别和动力学研究

用等温热重和线性升温热重分析法研究了草酸锰热分解过程,提出了判断其机理函数的3步判别法。经实验和理论分析证明,该反应受随机成核和晶核随后生长的过程(A_3a机理)支配,其活化能E=103.95 kJ/mol,频率因子A=4.448×10~8min~(-1).动力学补偿效应为IgA=0.09661E-1.2856     

电化学超级电容器电极材料的研究进展

回顾了电化学超级电容器电极材料的研究进展，并对不同电极材料的储能原理和性能特点进行了简要的阐述。参考文献29篇。     

微乳凝胶法制备MoO3/SiO2纳米复合氧化物及DSC-TG分析

由微乳凝胶法制备了一系列不同MoO3含量的MoO3/SiO2纳米复合氧化物,运用DSC-TG,TEM,XRD和FT-IR等技术对其进行了相应表征.结果表明:所制备复合氧化物适宜的焙烧温度为300℃;样品粒径分布在20~24 nm;样品中MoO3在SiO2表面分散良好,其单层分散阈值在12~12.5%之间;表面Mo与Si原子以Mo—O—Si键联接.     

RuO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed oxide composite coating for improvement of Al-alloy sacrificial anodes

It has been recently proved that RuO₂ can act as an effective surface activator of aluminum alloy sacrificial anodes. TiO₂ has the property of stabilizing RuO₂ coating and resisting biofouling on metal surfaces. Hence, a mixed oxide catalytic coating of TiO₂ and RuO₂ can enhance the galvanic performance of aluminum alloy sacrificial anodes and resists biofouling on the anode surface. In the present work RuO₂–TiO₂ mixed oxide was coated on aluminum alloy sacrificial anodes. The large and uniform porous nature of the coating was found to facilitate efficient ion diffusion. The coating was found to persist on the anode even after 3 months of galvanic exposure. The anode having an optimum combination of the mixed oxide had 70% TiO₂ as the major component in the coating. The catalytic coating significantly improved the performance of the anodes to a large extent.     

Characterization and catalytic behavior of La2 - x (Sr, Th)xCuO4 ± λ in reaction NO+CO

Two mixed oxide systems La₂-_xSr_xCuO_{4± λ} (0.0⩽x⩽1. 0) and La_2-xTh_xCuO_{4± λ} (O. O⩽x⩽ 0.4) with K₂NiF₄ structure were prepared by varyingx values. Their crystal structures were studied by means of XRD and IR spectra. The average valence of Cu ion at B site, nonstoichiometric oxygen (λ) and the chemical composition in the bulk and on the surface of the catalysts were measured by means of chemical analysis and XPS. The catalytic behavior in reaction CO+NO was investigated under the regular change of average valence of Cu ion at B site and nonstoichiometric oxygen (λ). Meanwhile, the adsorption and activation of the small molecules NO and the mixture of NO+CO over the mixed oxide catalysts were studied by means of MS-TPD. The catalytic mechanism of reaction NO+CO over these oxide catalysts were proposed; and it has been found that, at lower temperatures the activation of NO is the rate determining step and the catalytic activity is related to the lower valent metallic ion and its concentration, while at higher temperatures the adsorption of NO is the rate determining step and the catalytic activity is related to the oxygen vacancy and its concentration. Project supported by the National Natural Science Foundation of China.     

镧掺杂粘土源含铜氧化物催化剂的制备、表征及催化性能

采用共沉淀和水热法合成了不同阴离子粘土前驱型复合氧化物催化材料,样品经XRD,FTIR,TPR,TG-DSC,SEM进行表征.同时考察了铜含量在掺杂和不掺杂稀土时对甲烷催化燃烧的影响,结果发现随含铜量增加催化活性增加;未掺杂La的催化剂在高温下出现失活现象,而掺杂型催化剂稳定性良好.同时,制备方法对催化剂的性能有显著影响,在不同制备前驱物pH的条件下,使用共沉淀和水热法合成的阴离子粘土材料,合成时的pH均对催化剂的活性影响较大;同时焙烧温度对催化活性有不同程度的影响.