CCD摄像机大视场光学镜头的设计

为提高CCD摄像机的成像质量，同时使镜头结构紧凑、小型化，在大视场光学镜头的设计中，引入标准二次曲面和偶次非球面。根据初级像差理论，分析了非球面的位置、初始结构参数的求解规律。通过理论计算和ZEMAX光学设计软件的优化，给出工作波长为0.4～0.7μm、全视场角为80°，相对孔径为1∶1.5的镜头设计实例。该镜头由7块镜片组成，包括一个标准二次曲面和两个8次方非球面；在40lp/mm空间频率处的MTF值超过0.85，全视场畸变小于3％，像质优良     

On the construction of samples for testing approximate optimization methods for estimate calculation algorithms

To validate approximate optimization schemes for estimate calculation algorithms (ECAs), it is necessary to compute the optimal height, which cannot be done in a reasonable amount of time. A variety of samples are built for which the optimal height of the ECAs is known by construction.     

Structure and magnetism of bcc(1 1 0)-like Fe films grown on Cu(0 0 1) via ion beam triangulation and spin-polarized electron capture

The structure and magnetism of thin epitaxial Fe layers grown on Cu(0 0 1) is investigated by grazing scattering of fast H and He atoms. Information on the atomic structure of the film and substrate surfaces is obtained by making use of ion beam triangulation with protons. The magnetic behavior is studied via the polarization of light emitted after capture of spin-polarized electrons into excited atomic terms during scattering of He atoms. For the formation of bcc(1 1 0)-like Fe films at higher coverages, we detect differences in structural and magnetic properties for room and low temperature growth. We suggest that the crystalline structure depends on the film morphology and that Cu impurities affect the magnetic properties.     

Fast algorithms for determining the linear complexities of sequences over GF(pm) with the period 3n

In this paper, for the the primes p such that 3 is a divisor of p − 1, we prove a result which reduces the computation of the linear complexity of a sequence over GF(p ^m) (any positive integer m) with the period 3n (n and p ^m − 1 are coprime) to the computation of the linear complexities of three sequences with the period n. Combined with some known algorithms such as generalized Games-Chan algorithm, Berlekamp-Massey algorithm and Xiao-Wei-Lam-Imamura algorithm, we can determine the linear complexity of any sequence over GF(p ^m) with the period 3n (n and p ^m − 1 are coprime) more efficiently.     

Magnetic Properties of Metallic Multilayered Systems

Hyperfine Interactions - The giant magnetoresistance (GMR) effect was an epoch-making discovery in the field of magnetic materials research. In this article, studies on magnetic multilayered...     

Magnetic properties of mechanically alloyed Co–Ti powder

An amorphous phase containing traces of non-transformed Co and Ti powders was obtained by mechanical alloying nominal compositions of Co₆₇Ti₃₃ and Co₅₀Ti₅₀ in a high-energy ball-mill. These alloys were prepared from elemental powders of Co and Ti. The heat treatment of Co₆₇Ti₃₃ at 573, 873 and 1173 K crystallized nanoparticles of Co₂Ti and Co₃Ti compounds, while the same treatments conducted on Co₅₀Ti₅₀ resulted in the formation of Co₂Ti and CoTi nanoparticles. The saturation magnetizations reached a maximum value in the amorphous state and they decreased when the temperatures of the heat treatment rose. Demagnetizing interparticle interaction effects were estimated through hysteresis loops and initial magnetization curves using the Fourier technique.     

Effect of hardness and composition gradients on Barkhausen emission in case hardened steel

The effect of gradients in hardness, structure and composition in the surface layers on magnetic Barkhausen noise (MBN) was investigated in two widely used low alloy steels. One material was case hardened by induction hardening. The other was case carburised. Similar hardness profiles were produced by the two treatments. It was found that the variation in structure and hardness through the case in the induction-hardened steel had a minor effect on the MBN profile. In contrast, the inhomogeneity in the case-carburised material showed up clearly. This took the form of a broadened or two-peak MBN profile. When the surface layer containing the case was removed by etching, the broadened profile was replaced by a profile with a single peak. It is concluded that the shape and position of the MBN profile is significantly affected when a gradient in microstructure is induced by a gradient in carbon content. On the other hand, a gradient in microstructure induced by heat treatment with a constant carbon level has much less affect on the MBN profile for the induction-hardened steel.     

相对论平均场理论对196Pb超形变态的研究

在形变约束的相对论平均场理论框架下, 用TMA, PK1, NL3和NL-SH相互作用对¹⁹⁶Pb的超形变态进行了系统研究. 给出了¹⁹⁶Pb的位能曲线、基态和超形变态的形变以及超形变态退激的激发能. ¹⁹⁶Pb的基态为β₂≈－0.15的扁椭球, 超形变激发态为β₂≈0.60的长椭球, 激发能在4－5MeV之间, 势阱深度在1－2.2MeV之间. 这些结果与最近观测的实验数据符合得非常好, 表明相对论平均场理论能够较好地描述¹⁹⁶Pb超形变转动带带首的能量.     

用三个关系式与Mathematica软件求第二类自然数幂和公式

首先介绍三个第二类自然数幂和关系式并对其中的两式给出证明,接着利用这些关系式与数学软件M athem atica4.0,给出求解第二类自然数幂和公式的若干机械计算方法.     

Spectral action and big desert

The values of the Higgs mass are obtained for two possibilities of extending the standard model in a way compatible with the existence of a noncommutative structure at high energies. We assume the existence of a big desert between the low energy electroweak scale and the high energy scale Λ=1.1×10¹⁷ GeV, where noncommutative features become relevant. We conclude that it is extremely difficult to depart from the Higgs mass value obtained from noncommutative geometry for the standard model with three generations only.