Stability conditions for a pipeline polling scheme in satellite communications

This paper considers the unknown stability conditions of a pipeline polling scheme proposed for satellite communications. This scheme is modelled as a cyclic-service system with limited service and reservation. The walk times and the maximum number of services to be performed during each polling are dependent on the queue lengths of the stations. The main result is the derivation of the necessary and sufficient stability conditions of the system. Our approach is to map the multi-dimensional stability problem into many 1-dimensional stability problems through the concept of the least stable queue. The least stable queue is one that will become unstablefirst when the system load increases in some parameter region. The stability of the least stable queue thus implies stability of the system. The stability region for the whole system is then the union of the queue stability regions of all the least stable queues that are obtained through dominant systems and Loynes' theorem. We also propose a computable sufficient condition that is tighter than the existing result and present some numerical results.     

Structure of strobic acid

Strobic acid, a new diterpene resin acid from Pinus strobus, has been shown to have structure 1a by degradation and CD correlation.     

Investigation of scattering of elastic waves by cylinders in 1-3 piezocomposites

The scattering behavior of P-waves in piezoelectric composites with 1–3 connectivity is studied. The method of wave function expansion is adopted for the theoretical derivations. Analytical expressions are obtained for the distributions of mechanical displacement in z-direction along the circumferences of piezoelectric cylinders. These solutions are used to study the influence of each element of the stiffness matrix and the piezoelectric matrix on the various resonant modes of vibration. Numerical results obtained indicate that perturbations of the elements c₄₄ and e₁₅ significantly affect resonant frequencies and amplitudes, perturbations of c₁₁ and c₁₂ have pronounced effects on resonant modes of high frequencies also. However, the resonant modes are not so sensitive to the perturbations of c₁₃, e₃₁ and e₃₃. The dynamic characteristics of 1–3 connectivity piezoelectric composites exposed here are meaningful for the design and manufacture of sensor/actuator elements by this kind of composites as well as the on-line health monitoring of the mechanical properties variations of the composites itself.     

Evolution of the Electroluminescence Spectra and the Acoustic Emission of the Epitaxial Structures of GaAsP

The dependence of the spectral position of the electroluminescence bands of epitaxial light-emitting diode n ⁺–n–p structures (GaAs_0.15P_0.85) on the density of a direct heterojunction current at different successive instants of time — before an acoustic emission and after it — has been revealed. The shifts of the electroluminescence bands accompanied by acoustic emission can be divided into three types according to the density of the current: (1) short-term shifts due to relaxation of the defect structure of a sample — at relatively low currents, (2) the magnitude of the reverse shift being determined by the current density — at large currents, and (3) formation of an IR band (1.5–1.1 eV) with irreversible degradation changing in the red (1.75 eV) and green (2.19 eV) bands of the electroluminescence spectrum — at ultrahigh currents (100–200 A/cm²).     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Propagation of Bleustein-Gulyaev waves in a prestressed layered piezoelectric structure

Based on the theories of nonlinear continuum mechanics, piezoelectricity and elastic waves in solids, theoretical analysis of Bleustein-Gulyaev surface acoustic wave propagation in a prestressed layered piezoelectric structure are described. Numerical calculations are performed for the case that the layer and the substrate are identical LiNbO(3) except that they are polarized in opposite directions. It is found that an almost linear behavior of the relative change in phase velocity versus the initial stress is obtained for both surface electrically free and shorted cases. Potential applications in the design of acoustic wave devices are suggested.     

Operator kernel estimates for functions of generalized Schrödinger operators

We study the decay at large distances of operator kernels of functions of generalized Schrödinger operators, a class of semibounded second order partial differential operators of mathematical physics, which includes the Schrödinger operator, the magnetic Schrödinger operator, and the classical wave operators (i.e., acoustic operator, Maxwell operator, and other second order partial differential operators associated with classical wave equations). We derive an improved Combes-Thomas estimate, obtaining an explicit lower bound on the rate of exponential decay of the operator kernel of the resolvent. We prove that for slowly decreasing smooth functions the operator kernels decay faster than any polynomial.

     

声波导中的局部正交变换

In this paper, a local orthogonal transformation is created to transform the Helmholtz waveguide with curved interface to the one with a flat interface within the two-layer medium, and the Helmholtz equation uxx uzz k^2(x,z)u=0 is transformed to Vxx αVzz βVz γV=0. Numerical results demonstrate that the transformation is more feasible. This transformation is particularly useful for the research on wave propagation in acoustic waveguide.     

Noise Stability of SIS Receivers

There is a strong interest in the submillimeter astronomy community to increase the IF bandwidth of SIS receivers in order to better facilitate broad spectral linewidth and continuum observations of extragalactic sources. However, with an increase in receiver IF bandwidth there is a decrease in the mixer stability. This in turn effects the integration efficiency and quality of the measurement. In order to better understand the noise mechanisms responsible for reducing the receiver stability, we employed a technique first described by D.W. Allan and later elaborated upon by Schieder et al. In this paper we address a variety of factors that degrade the noise stability of SIS receivers. The goal of this exercise is to make recommendations aimed at maximizing SIS receiver stability.