Decomposition of no on Pd and Ir. Comparison with Pt and Rh

The unimolecular decomposition of NO has been examine on Pd and Ir and they are compared with the corresponding reactions on Pt and Rh. The runs were carried out in a differential flow reactor, at pressures from 0.01 to 5 Torr and temperatures from 500 to 1800 K. It was found that all rates of product formation could be described by Langmuir-Hinshelwood unimolecular rate expression, with an accuracy of±20% und all conditions. The decomposition of NO was virtually identical on Pt and Pd, and on Rh and Ir, but varied widely with temperature between these two groups of metals.     

Neue acetonylsubstituierte Azole II. 3-Acetonyl-1,2,4-oxadiazole, 2-Acetonyl-1,3,4-oxadiazole und 5-Acetonyl-1,2,4-thiadiazole

3-Acetonyl-1,2,4-oxadiazoles and 2-acetonyl-1,3,4-oxadiazoles are accessible starting with the ketal of acetoacetamide oxime and the ketal of acetoacetic acid hydrazide, respectively. 5-Acetonyl-1,2,4-thiadiazoles are obtained from 5-chloro-1,2,4-thiadiazoles andtert.-butyl acetoacetate. These Acetonyl-azoles are starting materials for three series of azolylvinyl phosphates and phosphonates.

Herrn Prof. Dr.Klaus Weissermel zu seinem 60. Geburtstag.     

Anwendung der Streustrahl-Methode zur Bestimmung der Elemente in Mineral?lprodukten mit Hilfe der R?ntgenfluorescenz-Spektral-Analyse am Beispiel der Bleibestimmung in Ottokraftstoffen

Zusammenfassung In einem relativ einfach durchzuführenden Verbundverfahren wird Selen im Sauerstoff-strom innerhalb 15 min bei 1100–1150°C quantitativ aus den Metall- bzw. Metalloxidschmelzen verdampft und in einer mit flüssigem Stickstoff gekühlten Vorlage aufgefangen. Das aus der Vorlage mit einer definierten Menge verdünnter HNO₃ in Gegenwart von Ni-Nitrat gelöste Selen läßt sich direkt durch AAS mit dem Graphitofen (FAAS) äußerst nachweisstark und zuverlässig bestimmen. Die Nachweisgrenze (elektrodenlose Entladungslampe) liegt bei 3×10^–11 g Se. Der Verfahrensverbund erlaubt mit Probenmengen 10 g in Ag und Au Se-Gehalte 0,05 ppb,inCu 0,1 ppb,in Bi 0,2 ppb und in Pb 10 ppb zu erfassen. Für draht-, stab- und spanförmige Proben erhält man für Se-Gehalte von 2–0,002 ppm Variationskoeffizienten zwischen 3 und 6%. Die Vollständigkeit der Se-Verdampfung aus den Matrices Cu, Ag, Au und Bi wurde ebenso wie die Richtigkeit des Gesamtverfahrens durch systematische Untersuchungen belegt.

---

Determination of se by furnace atomic absorption spectrometry (FAAS) in the ppb-range in Cu, Cu alloys, Ag, Au, Pb and Bi after volatilization in an oxygen stream

Summary Selenium is evaporated in a multi-stage procedure within 15 min from metals or metal oxides fused at temperatures of 1100–1150°C under a stream of oxygen and is trapped in a receiver cooled with liquid nitrogen. The condensed SeO₂ is dissolved with a definite volume of diluted HNO₃ in the presence of Ni-nitrate and determined with high sensitivity and reliability by FAAS (electrodeless discharge lamp). The detection limit of the FAAS was found to be 3 · 10^–11 g of Se. The multi-stage procedure allows to detect Se levels 0.05 ppb in Ag and Au, 0.1 ppb in Cu, 0.2 ppb in Bi, and 10 ppb in Pb, respectively, with sample weights 10 g. For wire, rod, and chip samples the coefficients of variation are found to be between 3 and 6% for Se contents of 2 to 0.002 ppm. The quantitative evaporation of Se from Cu, Ag, Au, and Bi as well as the accuracy of the whole procedure have been checked systematically.

Die Arbeit wurde durch Mittel der DFG in dankenswerter Weise unterstützt.     

Novel chemical modifications at the 4-position of chromones. Synthesis and reactivity of 4H-chromene-4-spiro-5′-isoxazolines and related compounds

Reactions of chromones with dilithiooximes proceed via nucleophilic 1,2-addition to give, on acidification, 4H-chromene-4-spiro-5′-isoxazoline derivatives in high yields. On treatment with concentrated H₂SO₄ the isoxazoline ring of this novel spiroannulated heterocyclic system opens to give α,β-unsaturated oximes, which undergo nitrosation, bromination, and the Beckmann rearrangement to the corresponding spiroisoxazolines and α,β-unsaturated amides, respectively. The latter can be obtained directly by the Beckmann rearrangement of 4H-chromene-4-spiro-5′-isoxazolines.     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Electron microscopic phase analysis of BN-thin films

A series of BN films was deposited by means of r.f. magnetron sputtering of a h-BN target onto Si(1OO) surfaces. Hereby, the substrate bias voltage was varied. Special interest is focussed to the influence of the deposition parameters on the orientation of the growing hexagonal BN film with respect to the substrate. For structural investigation, cross section samples were prepared. In addition to HRTEM and diffraction investigations, especially electron energy loss spectroscopy (EELS) was applied successfully for phase identification. For negative bias voltages of U _B =–300 V and U _B =–350V, we found a phase system consisting of a first-grown 25 nm thick layer of hexagonal structure with the c axis parallel to the substrate surface followed by the cubic phase.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Synthesis and Spectroscopic Study of Some New Phosphoramidates,Crystal Structures of N‐Benzoyl‐N′,N″‐bis(azetidinyl)phosphoric Triamide and N‐Benzoyl‐N′,N″‐bis(hexamethylenyl)phosphoric Triamide

Some new N‐carbonyl, phosphoramidates with formula C₆H₅C(O)N(H)P(O)R₂ (R = NC₃H₆ ( 1 ), NC₆H₁₂ ( 2 ), NHCH₂CH=CH₂ ( 3 ), N(C₃H₇)₂ ( 4 )) and CCl₃C(O)N(H)P(O)R′₂ (R′ = NC₃H₆ ( 5 ), NHCH₂CH=CH₂ ( 6 )) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR and IR spectroscopy and elemental analysis. The structures were determined for compounds 1 and 2 . Compound 1 exists as two crystallographically independent molecules in crystal lattice. Both compounds 1 and 2 produced dimeric aggregates via intermolecular ‐P=O…H‐N‐ hydrogen bonds, which in compound 2 is a centrosymmetric dimer. In compounds with four‐membered ring amine groups, ³J(P,C)>²J(P,C), in agreement with our previous studies about five‐membered ring amine groups. Also, ³J(P,C) values in compounds 1 and 5 are greater than in compounds with five‐, six‐ and seven‐membered ring amine groups.     

Synthesis and Structure of Mixed Ba12F19ClδBr5–δ Crystals

In the structure Ba₁₂F₁₉Cl₅ [hexagonal space group P6 2m] the two chlorides on the sites Cl(1) and Cl(2) can partially be replaced by bromide ions. Single crystals of the type Ba₁₂F₁₉Cl_δBr_5–δ with a chloride to bromide ratio up to 2 : 3 could be obtained by cooling a flux of 75 mol% BaF₂ and 25 mol% BaX₂ with X = Cl, Br. The crystal quality decreases with increasing bromide concentration. Structural parameters of five selected single crystals with different chloride/bromide ratio were studied by single crystal X-ray diffraction methods. The refined total Cl^?/Br^? population ratio in the crystals is close to the one of the flux. The lattice parameters and interatomic distances change in various ways, when the smaller chloride ion is replaced by the bigger bromide ion. The refinements show a statistical disorder on the halide sites with preferential bromide substitution on site Cl(1).     

Photoelectron Spectra of Nonmetal Compounds and Their Interpretation by MO Models

The results of (low energy) photoelectron spectroscopy render possible a better appreciation of the “Nature of the Chemical Bond”. The application of this new experimental method is demonstrated utilizing representative compounds of the nonmetal elements, and a close symbiosis delineated with molecular orbital models. In particular, general consequences are discussed concerning electron deficiency, σ- and π-interactions, electron pair delocalization, and substituent effects or geometric perturbations. Photoelectron spectroscopic ionization energies permit evaluation of parameters for specified molecular groups, allow correlation with numerous other experimental data, and are didactically valuable in the teaching of general chemistry.     

Carbenoid Complexes of Electron-Deficient Transition Metals—Syntheses of and with Short-Lived Building Blocks

The relation of thermodynamic stability and kinetic lability of σ-organometallic compounds of transition metals, together with an improved understanding of the subtle interactions between central metal, ligands, and substrates, has increased the chemist's ability to plan organometallic syntheses. This article presents new results on intermediary and isolable synthetic building blocks incorporating metal–ligand multiple bonds of electron-deficient transition metals; the main emphasis will be placed on compounds with titanium–carbon double bonds. This particular class of compounds is mainly generated by H-transfer reactions starting from readily accessible alkyl and alkenyl derivatives. The preparative use of [L₂Ti(CHR₂)R′] derivatives as sources for [L₂Ti?CR₂] intermediates will be discussed, as well as the nature of these intermediates. Application of the same approach to vinyltitanium compounds [L₂Ti(CH?CH₂)R] opens up an access to a short-lived metallaallene derivative [L₂Ti?C?CH₂] of an electron-deficient transition metal. The reactivity of these synthetic building blocks is mainly characterized by the nucleophilic properties of the α-C atoms as well as by the spatial orientation of the π-bonding planes. Numerous cycloaddition products with unsaturated substrates could be isolated and characterized for the first time by using [L₂Ti?C?CH₂] intermediates. Hence it is possible to compare the properties of a multitude of metallacyclic ring systems with those obtained from “Tebbe–Grubbs chemistry”, and in this context, the dependence of the properties of metallacyclic four-membered rings on the substitution pattern is discussed. This class of compounds includes the metallaoxetanes, which have been obtained for the first time by the cycloaddition of the [CpTi?C?CH₂] intermediate with cumulenes and metal carbonyls. The differing cycloreversion behavior of these metallaoxetanes enables the differentiation of species exhibiting classical and nonclassical reactivity. The number and position of the exocyclic double bonds are the determining factors of the reactivity of the formed metallacycles. The discussion of the products obtained from titanium methylene and vinylidene building blocks is an up-to-date report on the formation and applications of carbene complexes and carbene intermediates of group 4 metals.