[Ru(phen)2dppz]2+二聚及对DNA键合性质的影响

研究发现, [Ru(phen)2dppz]2+表现出非常强的自聚合倾向, 并显著影响DNA的键合性质, 有关方面的研究应引起科研工作者的足够重视.     

稳定氮氧自由基TMPO和TMPRO的合成与应用

本文评述了近年来4-氧-2,2,6,6-四甲基哌啶-1-氧自由基(TMPO)和2,2,5,5-四甲基吡咯啉-1-氧自由基(TMPRO)及其衍生物在合成和应用方面的进展,着重讨论了这些氮氧自由基的合成方法和作为自旋标记试剂的应用。     

Capillary gas chromatography of lower aliphatic C2?C5 aldehydes in the free form as a group of pungent odorants in air

The capillary gas chromatography of the C₂-C₅ lower aliphatic aldehydes (e.g.,acetaldehyde, propionaldehyde, n- and i-butyraldehydes, n- and i-valeraldehydes) which, in the free form in air, have unpleasant odors and low threshold odor values, has been studied using cold-trap preconcentration with liquid oxygen. The capillary column outlet was connected to enable simultaneous detection by FID, ECD, FPD AND FTD (SID).     

Multi-purpose functionality for the structural elaboration of the piperazine-2,5-dione motif

Mild methods for controlled C- and N-alkylation of 3-benzyloxycarbonylpiperazine-2,5-diones are reported. The benzyloxylcarbonyl substituent can also serve as latent functionality for N-acyliminium ion formation and subsequent trapping enables installation of new carbon and/or heteroatom substituents.     

The reaction of phenylarsenazo with chromium(III)

The conditions for the reaction between phenylarsenazo (PAA) (2-[(2-arsonophenyl)azoj-7-(phenylazo)-1, 8-dihydroxynaphthalene-3,6-disulphonic acid) and chromium(III) have been studied. A blue 1:1 complex is formed at pH 2.2 on heating the reactants at 100 degrees for 15 min. It has maximum absorption at 635 nm and is stable for at least 24 hr. The molar absorptivity is 3.3 x 10(4) 1.mole(-1).cm(-1). Beer's law is obeyed in the chromium concentration range 0-1.4 mug ml . The reaction has been successfully applied to determination of chromium in alloy steel.     

Random walks on inhomogeneous lattices

For lattices with two kinds of points (black and white), distributed according to a translation-invariant joint probability distribution, we study statistical properties of the sequence of consecutive colors encountered by a random walker moving through the lattice. The probability distribution for the single steps of the walk is considered to be independent of the colors of the points. Several exact results are presented which are valid in any number of dimensions and for arbitrary probability distributions for the coloring of the points and the steps of the walk. They are used to derive a few general properties of random walks on lattices containing traps.Presented at the Symposium on Random Walks, Gaithersburg, MD, June 1982.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

EPR studies on H-abstraction from methylbenzenes by “magic blue” reagent

After mixing a methylbenzene 4 with “magic blue” solution in F113 (CClF₂CCl₂F) containing bis{perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl}nitroxide 2 and perfluoro-1-nitroso-1-[1-(2-fluorosulfonyl)ethoxy]ethane 3 at room temperature, benzylic H-atom of 4 could be selectively abstracted by 2, and benzyl radical 5 thus generated was immediately trapped by 3. Based on hyper-fine splitting constants (hfsc), the structure of the spin adducts perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl benzyl nitroxides 6 derived from seven methylbenzenes have been identified. The mechanism of the H-abstraction/spin trapping process is also discussed.     

Integrated chemical sensor array platform based on a light emitting diode, xerogel-derived sensor elements, and high-speed pin printing

We report a new, solid-state, integrated optical array sensor platform. By using pin printing technology in concert with sol-gel-processing methods, we form discrete xerogel-based microsensor elements that are on the order of 100 μm in diameter and 1 μm thick directly on the face of a light emitting diode (LED). The LED serves as the light source to excite chemically responsive luminophores sequestered within the doped xerogel microsensors and the analyte-dependent emission from within the doped xerogel is detected with a charge coupled device (CCD). We overcome the problem of background illumination from the LED reaching the CCD and the associated biasing that results by coating the LED first with a thin layer of blue paint. The thin paint layer serves as an optical filter, knocking out the LEDs red-edge spectral tail. The problem of the spatially-dependent fluence across the LED face is solved entirely by performing ratiometric measurements. We illustrate the performance of the new sensor scheme by forming an array of 100 discrete O₂-responsive sensing elements on the face of a single LED. The combination of pin printing with an integrated sensor and light source platform results in a rapid method of forming (∼1 s per sensor element) reusable sensor arrays. The entire sensor array can be calibrated using just one sensor element. Array-to-array reproducibly is <8%. Arrays can be formed using single or multiple pins with indistinguishable analytical performance.     

CaS：Ce，Sm的制备及性能表征

采用碳还原法制备了CaS：Ce，Sm样品，并研究了反应机理、还原原理以及灼烧温度对CaS晶格形成和光激励发光的影响。样品的XRD测试表明，采用碳还原法制备的CaS：Ce，Sm样品，具有纯CaS的面心立方结构，晶格常数a=0.569 4 nm，样品的激发光谱是峰值分别位于295 nm和461 nm的宽带谱，样品的荧光光谱是峰值位于503 nm、560 nm、600 nm和655 nm带谱，光激励发光光谱是峰值分别位于500 nm，565 nm和605 nm的宽带谱，光激励激发光谱是峰值位于1 150 nm的宽带谱。