n—InP在Fe^3＋／Fe^2＋溶液中光脉冲暂态行为（Ⅳ）

研究了波长、温度及表面处理对ｎ－ＩｎＰ光脉冲暂态行为的影响。结果表明，波长对时间常数无影响；随着温度升高，峰值下降，衰减变快。讨论了表面处理的影响，并对实验结果作了必要的解释。     

Investigation of the thermophysical properties of polymers by the temperature wave technique

The technique of temperature waves to measure the complex thermophysical characteristics of materials has been proposed. The relations for the moduli and arguments of these characteristics for the case of plane temperature waves have been calculated. The temperature dependences of the moduli and arguments of complex thermophysical characteristics of polyvinylacetate (PVAc) at different frequencies and also the temperature dependences of its vibrational and configurational heat capacities have been determined. It has been shown that the vibrational heat capacity of PVAc in the region of softening grows sharply and its configurational heat capacity goes through a peak. The segmental mobility has been found to affect the heat transfer in the polymer in an ambivalent way causing both a decrease and increase of thermal conductivity.

---

Zusammenfassung Zur Bestimmung der komplexen thermophysischen Eigenschaften von Stoffen wurde eine Temperaturwellentechnik vorgeschlagen. Für den Fall zweidimensionaler Temperatur-wellen wurden die Verhältnisse von Moduli und Argumenten dieser Eigenschaften berechnet. Die Temperaturabhängigkeit von Moduli und Argumenten der komplexen thermophysischen Eigen-schaften von Polyvinylacetat (PVAc) bei verschiedenen Frequenzen und auch die Temperatur-abhängigkeit seiner Vibrations- und Konfigurations-Wärmekapazitäten wurden bestimmt. Es wurde gezeigt, daß die Vibrations-Wärmekapazität von PVAc im Erweichungsbereich scharf zunimmt und die Konfigurations-Wärmekapazität durch einen Peak geht. Man fand, daß die Segment-Mobilität den Wärmetransport im Polymer auf eine ambivalente Weise beeinflußt, in dem die Wärmeleit-fähigkeit entweder gesenkt oder angehoben wird.

     

Two-dimensional capillary gas chromatography without intermediate trapping. Electron capture detector quantitation of an amino alcohol (KABI 2128) in serum after trifluoroacetylation

A two- dimensional gas chromatograph based on the Deans switching principle is described. The unit comprises two separate ovens, each containing a fused silica capillary column. The columns are joined in a specially designed manifold permitting heart cuts to be performed without significant decrease in efficiency. The switching speed and the retention time stability of the system made it possible to perform heart cuts of only a few seconds' duration. The system has been used under isothermal conditions for the determination of an amino alcohol (KABI 2128) in the low ng/ml range after trifluoroacetylation and with electron capture detection. A much shorter clean-up procedure could be used in combination with the two-dimensional gas chromatograph as compared to a method using a single glass capillary column.     

胶束增敏导数—可变角同步荧光法同时测定两种羟基联苯

本文建立了２，２’－二羟基联苯（ＤＨＰ）和４－羟基联苯（ＨＰ）的胶束增敏导数－可变角同步荧光同时分析方法，可变角同步扫描所得到的ＤＨＰ和ＨＰ的谱峰位置均对应于常规光谱中的最佳激发－发射位置，经二阶求导后，消除分析谱带干扰，所得的二阶导数－可变角同步光谱即可用于两物质的同时测定，方法快速灵敏，ＤＨＰ测定范围为０．０５～０．５ｍｇ／Ｌ，ＨＰ测定范围为０．０７～２ｍｇ／Ｌ。     

Analytical applications of a differential technique in laser-induced fluorimetry: accurate and precise determination of uranium in concentrates and for designing microchemielectronic devices for on-line determination in processing industries

A novel instrumental technique for the direct, fast, accurate, and precise determination of uranium in concentrates and other U-rich materials (as well as to mineralized rocks) is presented. The proposed technique is an absolute methodology, based on the comparison of the fluorescence of the accurately known standard with a sample of similar but unknown concentration in the low operational range of the instrument (on same sample-dilution basis), by the use of H₃PO₄-NH₄H₂PO₄ as a fluorescence-enhancing reagent. The relative standard deviation of the proposed technique was 0.5-0.9% (n=9) at 18.1, 36.2, 61.2, and 99.6% U₃O₈. The proposed technique is suitable for the determination of uranium in samples arising from exploration projects, ores from mining operations, mill process samples, uranium ore concentrates leading to fuel fabrication as well as samples from environmental monitoring containing up to 100% uranium. The results are in good agreement with those obtained by titrimetric, gravimetric, and TBP extraction-H₂O₂ spectrophotometric methods. The precision of the technique is within the acceptable ‘pure geochemistry’ type of analysis (R.S.D. ∼ 1.0%) and is comparable even those obtained with titrimetric and gravimetric assay. The proposed differential technique coupled with flow injection may open up new advancement in instrumentation leading to design and development of microchemielectronic devices for direct on-line determination, more compatible with the tools of computer age as also to help in handling of radioactive solutions in chemical laboratories in uranium processing industries.     

Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

A study of methylation of inorganic tin by iodomethane in an aquatic environment with 13C carbon isotope tracer technique

The methylation of tin(II) [Sn(II)] by iodomethane (CH₃I) under environmental conditions has been further demonstrated by a ¹³C carbon isotope tracer method. Methylation products are mainly monomethyltin, and very small amounts of dimethyltin. The reaction of Sn(II) and CH₃I was investigated at pH 2, 4, 6, 8, 10 and salinity (S) 8, 15, 22, 28, 35%; it has been found the reaction was affected by pH and salinity, the tin methylation activity being highest at about pH 6 and S = 28% . The methylation reaction is first-order for both CH₃I and Sn(II), and the rate equation has been obtained as follows: .     

On the factors affecting the enhanced resonance light scattering signals of the interactions between proteins and multiply negatively charged chromophores using water blue as an example

Electrostatic interactions of proteins, including bovine serum albumin (BSA), human serum albumin (HSA), γ-globulin (γ-IgG), α-chymotrypsin (Chy), lysozyme (Lys) and cellulase (Cel), with multiply negatively charged chromophores were investigated based on the measurements of the enhanced resonance light scattering (RLS) signals. Using triply negatively charged water blue (WB) as an example, the factors were discussed that affect the enhanced resonance light scattering signals of the interactions between proteins and the negatively charged chromophores. It was found that the enhanced RLS signals with the maximum light scattering peak at 346.0 nm in these interacting systems are strongly dependent on the isoelectric points of proteins and show adverse linear relationships with increasing ionic strength depending on the positive charges of the inorganic metal ions used to control the ionic strength of the medium, sufficiently disclosing that the electrostatic attraction performs an important role in the combination of proteins with WB. Linear responses were discovered between the enhanced RLS signals and the protein molecular weights (M_w), displaying the dimensions of scattered particles formed by proteins and WB make a key contribution to the RLS enhancements. An empirical equation is proposed which possibly displays the factors affecting the enhanced RLS signals of the interactions between proteins with negatively charged chromophores.     

Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

The solvent venting injection technique in capillary supercritical fluid chromatography

A solvent venting technique for injection of volumes up to 1 μl on 50 μm i.d. SFC columns has been compared to direct injection methods. The peak broadening and peak splitting observed with direct injection have been examined and found to be related to the starting pressure, the column temperature, and the sample solvent, in addition to the sample volume. The solvent venting technique removed peak splitting and improved the column efficiency. With a proper selection of experimental conditions, the sample recovery was 100%. The major part of the solvent was eluted in 15–20 s. Several applications have been demonstrated.