确定性谐和与随机噪声联合作用下二自由度系统的响应

研究了二自由度非线性系统在确定性谐和与随机噪声联合激励下的主共振响应。用多尺度法分离了系统的快变项 ,讨论了系统的阻尼项、随机项等对系统响应的影响。在一定条件下 ,系统具有两个均方响应值和跳跃现象 ,饱和现象也存在。数值模拟表明本文提出的方法是有效的     

Non-Isotropic Length Scales During the Compression Stroke of a Motored Piston Engine

For the case of axial compression the two-point velocity correlation equations of axisymmetric homogeneous turbulence are derived. Appropriate integrations then lead to equations for the components of the Reynolds stress tensor as well as to those for the two independent integral length-scales characterizing axisymmetric homogeneous turbulence. These equations contain a certain number of empirical constants. Values for these constants are taken from the literature, or were adjusted from the present data.The resulting model is validated using data from a motored piston engine. The flow field, which has negligible swirl and tumble, has been measured using particle image velocimetry (PIV). Since turbulence is axisymmetric and homogeneous in the counter region, two-dimensional PIV provides the time history of the axial and radial length-scales. The experimental data are compared with the mathematical model.     

Aspects of crystallization fouling

Crystallization fouling or scale formation is temperature dependent, and a degree of supersaturation is required before precipitation occurs. In general, a nucleus is necessary around which crystals can form. The mechanism of crystallization on surfaces is complex, and it is difficult to explain in mathematical terms, although attempts have been made. The paper concludes with a brief review of scale formation under boiling conditions and the deposition of wax crystals from organic liquids.     

Mass and heat transfer by natural convection in a vertical cavity

This paper reports a fundamental study of laminar natural convection in a rectangular enclosure with heat and mass transfer from the side, when the bouyancy effect is due to density variations caused by either temperature or concentration variations. In the first part of the study scale analysis is used to determine the scales of the flow, temperature and concentration fields in boundary layer flow for all values of Prandtl and Lewis numbers. In particular, scale analysis shows that in the extreme case where the flow is driven by bouyancy due to temperature variations, the ratio of mass transfer rate divided by heat transfer rate scales as $\text{Le}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ only if (Pr > 1, Le < 1) or (Pr < 1, Sc < 1), and as $\text{Le}{}^{\mathrm{<mtext>1</mtext><mtext>3</mtext>}}$ if (Pr > 1, Le > 1) or (Pr < 1, Sc > 1). In the second part of the study, the boundary layer scales derived in the first part are used to determine the heat and mass transport characteristics of a vertical slot filled with fluid. Criteria for the existence of distinct thermal and concentration boundary layers in the slot are determined. Numerical solutions for the flow and concentration fields in a slot without distinct thermal boundary layers are reported. These solutions support further the method of scale analysis employed in the first part of the study     

Large eddy simulation of compressible round jets with coflow

Large eddy simulations of subsonic round jets are carried out using high order compact finite difference scheme and an explicit filtering based approximate deconvolution method. The jets have a Mach number of 0.9 and Reynolds number of $4.5\times {10}^5$ based on jet diameter and centerline velocity at inflow. Results obtained for the mean flow and turbulence intensities agree well with those in existing literature. We also study the effects of co-flow velocity ratio on the flow physics. Increase in potential core length and decrease in spreading rate of jet is observed in the presence of co-flow. The effects of co-flow velocity ratio on the axial Reynolds stress and turbulent kinetic energy budgets are also presented. It is observed that increasing co-flow velocity ratio leads to reduction in the turbulence intensities and near-field sound levels.     

An investigation of thermally stratified turbulent channel flow with temperature oscillation on the bottom wall by large eddy simulation

Thermally stratified shear turbulent channel flow with temperature oscillation on the bottom wall of the channel is calculated to investigate the behavior of turbulent flow and heat transfer by use of large eddy simulation (LES) approach coupled with dynamic subgrid-scale (SGS) models. The objective of this study is to deal with the effect of the temperature oscillation on turbulent behavior of thermally stratified turbulent channel flow and to examine the effectiveness of the LES technique for predicting statistically unsteady turbulent flow driven by time-varying buoyancy force. To validate the present calculation, thermally stratified shear turbulent channel flow is computed and compared with available data obtained by direct numerical simulation (DNS), which confirm that the present approach can be used to predict thermally stratified turbulent channel flow satisfactorily. Further, to illustrate the effect of the temperature oscillation with different Richardson numbers and periods of the oscillation on turbulence characteristics, the phase-averaged mean value and fluctuation of the resolved velocities and temperature, and instantaneous velocity fluctuation structures are analyzed.     

Non-linear analysis of functionally graded plates under transverse and in-plane loads

Large deflection and postbuckling responses of functionally graded rectangular plates under transverse and in-plane loads are investigated by using a semi-analytical approach. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The plate is assumed to be clamped on two opposite edges and the remaining two edges may be simply supported or clamped or may have elastic rotational edge constraints. The formulations are based on the classical plate theory, accounting for the plate-foundation interaction effects by a two-parameter model (Pasternak-type), from which Winkler elastic foundation can be treated as a limiting case. A perturbation technique in conjunction with one-dimensional differential quadrature approximation and Galerkin procedure are employed in the present analysis. The numerical illustrations concern the large deflection and postbuckling behavior of functional graded plates with two pairs of constituent materials. Effects played by volume fraction, the character of boundary conditions, plate aspect ratio, foundation stiffness, initial compressive stress as well as initial transverse pressure are studied.     

关于结构塑性动力失效若干问题的研究进展

重点分析常见工程结构元件（如梁、板、圆柱壳、圆环和夹层及复合材料结构）在强动短时载荷下塑性动力失效的研究方法、进展及尚待解决的问题，这些结构元件的失效模式及分析方法具有普遍意义，建议借用无量纲数──损伤数（ｄａｍａｇｅｎｕｍｂｅｒ）──来统一表征结构塑性动力失效的判据，最后以海洋平台和桁架为例简单介绍工程中复杂结构动力失效分析的情况。     

STUDY OF THE EQUIVALENT THEOREM OF GENERALIZED VARIATIONAL PRINCIPLES IN ELASTICITY

The relations of all generalized variational principles in elasticity are studied by employing the invariance theorem of field theory. The infinitesimal scale transformation in field theory was employed to investigate the equivalent theorem. Among the results found particularly interesting are those related to that all generalized variational principles in elasticity are equal to each other. Also studied result is that only two variables are independent in the functional and the stress-strain relation is the variational constraint condition for all generalized variational principles in elasticity. This work has proven again the conclusion of Prof. Chien Wei-zang.