南药巴戟天中十二种无机元素与药效关系的进一步研究

在初步研究的基础上，进一步研究了不同产地巴戟天的无机元素含量差异，通过对比各元素含量、相关系数及TE图谱，说明地道药材与非地道药材的巴戟天，其特征元素的含量存在非常明显的差异，要使大面积扩种的药材提高药效，建议根据当地土壤含Mn、Fe、Cr、Co、Ni的含量，以旋微量元素肥料的方法来补充这些元素在土壤中的不足。但在微量元素肥料配方中，应注意巴戟天吸收土壤中的元素时的协同作用和拮抗作用。     

Arsenic Speciation in As(III)- and As(V)-Treated Soil Using XANES Spectroscopy

Arsenic (As) is a toxic trace element that occurs naturally in groundwater and soils. Understanding the reactions of arsenite (As(III)) and arsenate (As(V)) with soil and mineral surfaces is critical for predicting the fate and transport of As in the environment and developing better ways to remediate As-contaminated areas. This investigation uses X-ray absorption near edge spectroscopy (XANES) to evaluate the solid phase oxidation state and mineral surface binding sites in three agricultural soil samples from California, USA by fitting linear combinations of XANES spectra derived from several synthetic and well characterized As(III)- and As(V)-treated model compounds (Fe and Al metal hydroxides and aluminosilicate illite clay mineral). The results suggest that As(III) is either partially or completely oxidized to As(V) when reacted with soil in an aqueous, batch reaction. The As(III)-treated Aiken soil was composed of 60% As(III) attached to surfaces similar to lepidocrocite (γ-FeOOH)) and 40% As(V) attached to aluminosilicate (illite). The Fallbrook soil completely oxidized As(III) and the product was As(V) adsorbed on Al hydroxide (gibbsite, γ-Al(OH)₃) (62%), illite (16%), and lepidocrocite (γ-FeOOH) (22%). The reaction of As(III) with Wyo soil resulted in 42% As(III) adsorbed on surface similar to goethite and 58% As(V) adsorbed on lepidocrocite. Arsenic(V) adsorption on soil resulted in stable As(V) surface complexes that were well described by XANES spectra from As(V) adsorption complexes on gibbsite, illite, and lepidocrocite.     

A decomposition procedure for the determination of arsenic in marine samples

The use of wet and dry ashing procedures to decompose marine biological tissues and to degrade organoarsenic compounds to inorganic arsenic for analysis by zinc-column arsine generation and atomic-absorption spectrophotometry was investigated. Wet ashing with nitric, sulphuric and perchloric acids (10:2:3 v/v) released the largest percentage of arsenic from fish tissue and quantitatively degraded methylated and other organoarsenic compounds to inorganic arsenic. The arsenic concentrations found when standard reference materials were ashed with this acid mixture were in agreement with the certified values.     

Simultaneous determination of mercury and arsenic by anodic stripping voltammetry

An electrochemical method for the simultaneous determinations of Hg^II concentration and total As^III and As^V concentration has been developed. The method does not require the additional preliminary step of the chemical reduction of As^V to As^III, or oxidation of As^III to As^V before stripping analysis takes place. Also, the method for the simultaneous determination of Hg^II concentration and As^III concentration is described. Measurements were performed in 0.1 M HCl using a gold-plated graphite electrode as sensor. Detection limits for both methods are below 0.4 ppb. Relative standard deviation did not exceed 15%. The possible interference by other trace metals was investigated. Analyses of natural water and industrial solutions were made using proposed methods and AAS. The t-test demonstrates that there was no significant difference between the results obtained with these methods. Proposed methods decrease the time of analysis because concentrations of the Hg^II and arsenic ions were measured simultaneously. Also, the removal of the additional step of chemical reduction of As^V to As^III or oxidation of As^III to As^V decreases analysis time, and also reduces the chance of contamination due to the use of additional reagents.     

Speciation of chromium in waste waters by coupled column ion chromatography-inductively coupled plasma mass spectrometry

An application of coupled column ion chromatography (IC)-inductively coupled plasma mass spectrometry (ICP-MS) is presented for speciation of chromium in waste waters. By coupling an anion column with a cation column, both the cationic Cr(III) and anionic Cr(VI) species can be analyzed with detection limits below 0.5 μg/1. The separation of the interfering ions (chloride, chlorate, perchlorate, sulphate, sulphite, sulphide, thiosulphate, carbonate, cyanide and some organic compounds) from the chromium peaks is discussed, and the use of different chromium isotopes for data acquisition is compared. Based on the results, m/z 52 was considered as an ideal isotope for speciation of chromium in waste waters by the coupled column IC-ICP-MS, because it did not suffer from polyatomic interferences and due to the high sensitivity for chromium. The analysis of the waste water samples should be performed as soon as possible after sampling according to the stability tests of the species.     

Routine determination of major anions in atmospheric aerosols by capillary electrophoresis

Capillary electrophoresis (CE) with indirect UV detection utilizing a pyromellitate-based electrolyte was used for the routine analysis of major anions in atmospheric aerosols collected on filters with high-volume (Hi-Vol) samplers. The long-term reliability of the CE system was checked over an 8-month period during which over 2900 samples were analyzed. In addition, approximately 1100 samples were analyzed in parallel by ion chromatography (IC). It has been shown that acceptable analytical performance can be routinely obtained. The agreement between the CE and IC results is good, generally better than 20% at concentrations larger than 1 mg l⁻¹.     

梯度淋洗离子色谱法同时分析有机酸与无机酸阴离子的应用研究

利用梯度离子色谱法和抑制电导检测器对有机酸与无机酸阴离子的色谱分析条件进行了研究,建立了最佳梯度程序。通过浓缩柱的富集,可使方法的检出限达1×10-3μg·L-1,各离子的相对标准偏差大部分在5%以下。此方法可用于火电厂水汽系统中痕量低分子有机酸和无机酸阴离子的快速、准确分析,结果满意。     

反相高效液相色谱法分析无机阴离子研究

本文研究了提高ＲＰ－ＨＰＬＣ测定无机阴离子的选择性的方法，设计了利用对离子试剂和背景试剂兼作ｐＨ调节剂，建立了几种分离分析系统和实际样品分析方法。     

氢化物发生原子荧光光谱法测定铅基合金中砷

建立了以HG-AFS测定铅基合金样品中砷的简单方法,研究了共存元素可能引起的干扰并成功地加以解决,优化了氢化物发生条件及仪器的工作参数。KBH4最优浓度为1.0%(m/V),样品溶液和载流中HCl的最优浓度分别为10%(V/V)和5%(V/V)。实验表明,当硫脲存在时,Cu不干扰As的测定;Sb、Sn和Bi引起的干扰可以通过0.5%(m/V)KMnO4溶液在线吸收相应的氢化物加以消除。通过测定铅基合金标准样品以检验方法的准确性,由标准加入法得到的结果与标准值吻合。本方法的检出限为0.17μg/L,对40μg/LAs标准溶液连续测定11次的相对标准偏差为1.45%。     

Separation and sensitive determination of arsenic species (As/As) using the yeast-immobilized column and hydride generation in ICP–AES

Inorganic arsenic was separated using the yeast-immobilized column. Saccharomyces cerevisiae was covalently bonded unto the controlled pore glass, which showed selective preconcentration of As⁵⁺ over As³⁺. The effluent was directly connected to hydride generation (HG) to increase sensitivity. The optimum pH condition for the retainment of arsenic at the column was 7. As⁵⁺ and As³⁺ were completely separated in a few minutes with the flow rate of 1.5 ml min⁻¹. Three molars of nitric acid was adequate both for the elution of As⁵⁺ and hydride generation. The accuracy of the technique was tested with NIST SRMs. Quantitative analysis of arsenic species for herbicide, pesticide, and cigarette were performed, and the results showed good agreements with the suggested values. Yeast-immobilized column-HG-ICP showed a promising future for the arsenic speciation study.