Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

Development of aryl-containing dipyrrolyldiketone difluoroboron complexes (BONEPYs): Tune the hydrogen bond o–CH···F for fluoride recognition

Dipyrrolyldiketone difluoroboron complexes (BONEPYs) were synthesized by condensation of the corresponding pyrroles and malonyl chloride followed by treatment with BF₃·OEt₂. The aryl-substituted pyrrole is introduced to form a cyclic system in order to investigate anion binding studies. In BONEPYs 1–3 the o-H of the aryl group forms hydrogen bonding with F⁻ to give a more table complex. In contrast, the intramolecular hydrogen-bonded BONEPY endo-4 is more stable than its exo isomer. While adding F⁻, the hydrogen bonds must be broken first to give 4·(3)F⁻. Owing to the electron-rich group (-OMe), the o-H of the phenyl group can hardly interact with F⁻ via hydrogen bonding to give the less stable complex 4·(5)F⁻. The energy differences between the different conformations were calculated using DFT methods, which is consistent to the experimental observations.     

Crystal Structure of Cesium Dihydrotrifluoride,CsH2F3. Refinement of the Crystal Structures of NMe4HF2 and NMe4H2F3

Single crystals of (NMe₄)(HF₂) were obtained during attempted recrystallization of NMe₄F from fluoroolefin. X‐ray diffraction data show that (NMe₄)(HF₂) crystallizes in the orthorhombic space group Pmmn with unit cell dimensions a = 6.535(2), b = 8.688(3), and c = 5.333(2) Å. The symmetric and virtually linear HF₂ anions exhibit a short F···F distance of 2.256(2) Å. The both crystal structures of (NMe₄)(H₂F₃) (orthorhombic, Pbca, a = 8.509(1), b = 11.273(2), and c = 14.880(2) Å) and CsH₂F₃ (orthorhombic, P2₁2₁2₁, a = 7.345(3), b = 9.126(4), and c = 11.444(4) Å) contain dihydrogentrifluoride anions, H₂F₃^?, which have a bent shape and F···F distances of 2.30‐2.34Å.     

Anion recognition by bisimidazolium and bisbenzimidazolium cholapods

Bile acid-based acyclic receptors bearing two imidazole and benzimidazole moieties have been synthesized. Anion binding studies using ¹H NMR revealed that imidazolium receptor exhibits high selectivity for chloride ion while benzimidazolium receptor showed selectivity for Y-shaped acetate ion through hydrogen bond interactions involving imidazolium C-2 and acetyl methylene hydrogens.     

Two-dimensional catena–polymer [[[bis (µ-aqua)(bis (µ-cpiap-K2O1:O2)sodium(I))] (µ-chlorido) bis(µ-cpiap-K5N1:O1:O2:O3,O3′)dicopper(II)]bis(µ-aqua)(aqua)bis(cpiap-K2O1,O2)copper(II)] hexa hydrate

The new title two-dimensional hetero-tetra nuclear Cu₃–Na coordination polymer {[NaCu₃Cl(cpiap)₂(H₂O)₃]_n·6nH₂O} (1) consists of crystallographically two-independent copper(II) centers, each bridged by a sodium cation through carboxylate-oxygen of the deprotonated H₃cpiap ligand (H₃cpiap = 2-(carboxyphenyl)iminoaceticpropanoic acid) to Cu^II (2) and Cu^II (2⁻) cations, and through water molecules to Cu^II (1) cation. Cu^II (2) and Cu^II (1) cations are bridged by carboxylate-oxygen atoms of the ligand in a syn-anti mode which, alternate regularly within the chain being bridged by a tetra coordinated sodium cation. Each Cu^II (2) and Cu^II (2⁻) cation in (1) is in an octahedral environment formed by four carboxylate-oxygens from two cpiap³⁻ ligands, one nitrogen atom and a bridging chloride atom. Cu^II (1) cation is in a square pyramidal environment formed by three water molecules and two carboxylate-oxygens from two cpiap³⁻ ligands. The ligand acts simultaneously as monodentate and tridentate toward Cu^II (1) and Cu^II (2) cations respectively. The lattice water molecules involved in OH···O hydrogen bonding are situated in the void spaces between layers. The zigzag chains, which run along the b-axes further construct three-dimensional metal-organic framework via hydrogen bonding and weak face-to-face π-π interactions. Weak CH···O interactions are also present.     

单链高分子通过薄膜上纳米孔隙的输运过程: 链间相互作用的影响

从理论上研究了高分子链通过位于薄膜上的一个纳米孔隙的输运问题. 考虑在膜的一侧引入与传输高分子链有特殊相互作用的高分子链段, 研究链间相互作用致使高分子链构型的改变对其平均首次通过时间的影响, 进而在不同条件下进行了相应的数值模拟, 并讨论了其它一些相关问题.     

Selective formation of heterodimeric resorcinarene capsules

C_2V-symmetrical resorcinarene tetraesters 1 form in CDCl₃ dimeric capsules encapsulating one Me₄N⁺ cation. The homodimeric capsules of the tetra(3,4,5-trimethoxybenzoate) 1d and tetrabenzoate 1b or tetrafuroylate 1c disproportionate in solution to give quantitatively the heterodimers. The higher stability of the heterodimer is, most probably, caused by π-π attractions between the π-basic trimethoxyphenyl rings of 1d and relatively more π-accepting phenyl or furyl fragments of 1b or 1c.     

Conjugation and proton exchange equilibria I. Significant role of proton exchange and homoconjugation equilibria in protonic hetero systems

The significant role of the proton exchange and homoconjugation (formation of AHA^– and A₁HA ₁ ^– complexes) equilibria in protonic hetero systems (HA+A ₁ ^– ) has been shown from analysis of published data and from my own simple experiments. It is concluded that there is a need to reconsider some basic hydrogen bond problems. One of these problems-the existence of heteroconjugates in polar solvents — has been verified and illustrated with suitable experimental evidence (IR and UV-VIS spectra). The most accepted experimental evidence for the double minimum potential in the hydrogen bridge has been questioned as being in disagreement with the equilibrium law. A simple relation between the heteroconjugation constant, the parent homoconjugation constants and the proton exchange constant is also postulated. This relation fulfills important theoretical requirements, however, it is not applicable in extreme cases.To the memory of Bogdan Przybyszewski.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

Simultaneous hydrogen and peroxide production by photocatalytic water splitting

Photocatalytic oxidation of water is a promising method to realize large-scale H₂O₂ production without a hazardous and energy-intensive process. In this study, we introduce a Pt/TiO₂(anatase) photocatalyst to construct a simple and environmentally friendly system to achieve simultaneous H₂ and H₂O₂ production. Both H₂ and H₂O₂ are high-value chemicals, and their separation is automatic. Even without the assistance of a sacrificial agent, the system can reach an efficiency of 7410 and 5096 μmol g^–1 h^–1 (first 1 h) for H₂ and H₂O₂, respectively, which is much higher than that of a commercial Pt/TiO₂(anatase) system that has a similar morphology. This exceptional activity is attributed to the more favorable two-electron oxidation of water to H₂O₂, compared with the four-electron oxidation of water to O₂.