石墨炉原子吸收光谱无标样分析法的研究：Ⅰ.消除基体干扰

实现石墨炉原子吸收光谱绝对分析必须消除基体干扰，本研究采用有机基体改进剂，管壁原子化、热解涂层石墨管，峰面积积分吸收信号，Ｄ２灯或Ｚｅｅｍａｎ效应扣除背景，有效地控制和消除了海水基体对Ａｓ，Ｃｄ，Ｃｏ，Ｃｒ，Ｃｕ，Ｍｎ，Ｎｉ，Ｐｂ和Ｖ等元素的干扰，实现了无干扰测定。     

钯镁基体改进剂对铅,铋,锗在石墨炉中原子化影响的研究

通过原子吸收和X-射线衍射分析证明,加入钯镁基体改进剂在预热处理后对Pb、Bi和Ge三个元素分别生成金属间化合物PbPd_3、BiPd_3、Ge_9Pd_(23)和其他化合物,从而提高了最高允许灰化温度,改变了原子化机理。在原子化阶段这些金属间化合物直接分解为金属原子,结果提高测定灵敏度。     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

氢化物石墨炉原子吸收光谱法应用研究——Ⅱ.超痕量汞的测定

本文使用涂金石墨管,自制氢化物石墨炉进样系统及连续流动氢化物发生器,直接测定了粮食,植物及水中的痕量汞。该法实用性强,线性范围宽,精密度好,准确度高。灵敏度为1.1ng/L,检出限(3σ)为0.8ng/L。     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Catalytic oxidation of thiols to disulfides using iodine and CeCl3·7H2O in graphite

A very simple procedure for the efficient oxidation of thiols to disulfides catalyzed by I₂/CeCl₃·7H₂O in graphite and ethyl acetate as the solvent, in an open system at room temperature is described. The reaction proceeds cleanly under mild conditions and was performed with aromatic, aliphatic, and heterocyclic thiols.     

石墨炉原子吸收法中热解涂层石墨管在无标准分析法测定环境样品中铬的应用

本文探讨了热解涂层石墨管测定铬的最佳实验条件,研究了各种酸和干扰物质的基体效应,提出用浓氨水为基体改进剂克服高氯酸的干扰。比较了各原子化温度时的理论和实验特征量。使热解涂层石墨管有可能用于无标准分析法测定各种环境样品中的铬。     

电热蒸发进样—等离子体原子发射光谱中钒和钛的蒸发机理研究

自1974年Nixon报道钽丝电热蒸发作为ICP-AES进样技术以来,这一技术已引起了人们的极大兴趣,受到越来越广泛的重视。电热蒸发(ETV)-ICP-AES是一种将蒸发和激发分步进行的联用技术。石墨是目前普遍使用的蒸发器材料。然而,在高温下某些元素和石墨材料可以发生碳化反应,形成热稳定的碳化物,使分析物蒸发不完全或根本不蒸发,从而影响分析结果的灵敏度和准确性。为了解决这一问题,我们曾提出了以聚四氟乙烯(PTFE)悬浮体为氟化剂,氟化辅助ETV-ICP-AES直接测定粉煤标样中钒和钛的新方法,其检出限     

Nafion化学修饰圆盘预富集-石墨炉 原子吸收联用法对牛血超氧化物歧化酶中铜、锌分布状态的研究

本文研究了Nafion化学修饰钨丝圆盘预富集-石墨炉原子吸收(GFAAS)方法测定牛血超氧化物歧化酶(SOD)中游离态Cu～(2+)及Zn～(2+)的方法,并用GFAAS法直接测定SOD中铜、锌的总量,证实了牛血SOD中金属辅基铜、锌原子个数比为1:1,初步探讨了一定浓度的牛血SOD中Cu～(2+)、Zn～(2+)的表观离解平衡常数。为提高SOD的活性和稳定性的研究,提供了一种有效的方法。