Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

Gradients of the Exchange-repulsion Energy in the General Effective Fragment Potential Method

Formulae for calculating the analytic gradients of the exchange-repulsion energy in the general effective fragment potential (EFP2) method are derived and implemented using a direct differentiation approach. The timings for the exchange repulsion gradient evaluations are approximately three times longer than the energy evaluations, orders of magnitude faster than a previous implementation. Since the direct differentiation approach is not approximate, the gradients can be used with confidence in molecular dynamics and Monte Carlo simulations with the EFP2 method.     

A strategy for synthesis of polymer-protective bimetallic colloids

A strategy for the synthesis of polymer-protective bimetallic sols is proposed which has the advantage of the strong protective effect of the polymer agent on one of the composites to stabilize the bimetallic colloidal particles. This strategy is certified to be useful to the predication of the formation of stable bimetallic colloids protected by polymer and to the control of the particle size to a certain extent. A series of new PVP-protective bimetallic colloidal dispersions containing noble metal element (Pt, Rh, Pd), light transition metal element (Co, Fe), and boron are obtained from the corresponding salts by the methods of reduction by stage and coreduction, using the NaBH4 as reductant. The TEM, XRD and EPMA measurements indicate the formation of bimetallic colloids. An interesting kind of coil aggregation is observed in the systems of PVP-Pt-Co and PVP-Rh-Co prepared by the method of reduction by stage.     

Tests for liquid chromatographs

Summary The paper describes tests for liquid chromatographs to assess the autosampler and pump flow rate precision; suitability of the instrument for normal phase chromatography; UV detector performance; and external band broadening characteristics. Tests for mixing and proportioning characteristics of solvent pumps and performance of diode array detectors are also considered. These tests are designed to evaluate the performance of both newly released liquid chromatography equipment and equipment already in operation. Data from evaluations carried out by instrument manufacturer’s and suppliers is reported and discussed. This data offers specifications to a common format for initial selection of instruments prior to purchase.     

Comparison of the sequential simplex method and linear solvent strength theory in HPLC gradient elution optimization of multicomponent flavonoid mixtures

Summary Using a camomile flavonoid extract as the sample and four different reversed-phase partition systems, the ability of the Simplex procedure to produce optimum gradient separation of unknown multicomponent mixtures was checked against the linear solvent strength (LSS) gradient elution theory. On the same partition systems the mean solvent strenghts were measured by experimentally determined logk vs. mobile phase composition plots. These mean solvent strengths are compared to those inferred from the optimum gradients and the usefulness of LSS theory in multicomponent mixture gradient elution optimization is discussed.Dadicated to Prof. Dr. A Liberti on the occasion of his 70th birthday.     

New approach to linear gradient elution used for optimisation in reversed-phase liquid chromatography

A new mathematical treatment concerning the gradient elution in reversed-phase liquid chromatography when the volume fraction psi of an organic modifier in the water-organic mobile phase varies linearly with time is presented. The experimental ln k versus psi curve, where k is the retention factor under isocratic conditions in a binary mobile phase, is subdivided into a finite number of linear portions and the solute gradient retention time tR is calculated by means of an analytical expression arising from the fundamental equation of gradient elution. The validity of the proposed analytical expression and the methodology followed for the calculation of tR was tested using eight catechol-related solutes with mobile phases modified by methanol or acetonitrile. It was found that in all cases the accuracy of the predicted gradient retention times is very satisfactory because it is the same with the accuracy of the retention times predicted under isocratic conditions. Finally, the above method for estimating gradient retention times was used in an optimisation algorithm, which determines the best variation pattern of psi that leads to the optimum separation of a mixture of solutes at different values of the total elution time.     

Simultaneous determination of rosiglitazone and metformin in plasma by gradient liquid chromatography with UV detection

A novel, fast and simple liquid chromatographic method was developed and validated for the simultaneous determination of rosiglitazone and metformin in human plasma. The analysis was performed on a phenyl column (250 mm × 4.6 mm i.d., 5 μm) using a gradient method starting with mobile phase composed of acetonitrile:5 mM acetate buffer pH 5.5 (75:25, v/v). The flow rate was 1 mL min⁻¹. UV detection was performed at 245 nm and verapamil was used as internal standard. The total run time was less than 10 min. Sample preparation included a simple protein precipitation step with acetonitrile. Validation experiments were performed to demonstrate stability, specificity, sensitivity, linearity, accuracy, precision and robustness. The limit of quantification was 100 ng mL⁻¹ for rosiglitazone and 250 ng mL⁻¹ for metformin. The extraction recoveries were 100.02-105.0% for rosiglitazone and 105.64-103.88% for metformin. The method was applied with success to plasma samples obtained from diabetic patients undergoing treatment with rosiglitazone and metformin.     

Separation of proteins with a molecular mass difference of 2 kDa utilizing preparative double-inverted gradient polyacrylamide gel electrophoresis under nonreducing conditions: application to the isolation of 24 kDa human growth hormone

A method for separating proteins with a molecular mass difference of 2 kDa using SDS-PAGE under nonreducing conditions is presented. A sample mixture containing several human growth hormone (hGH) isoforms was initially separated on a weak anion-exchange column. Fractions rich in 24 kDa hGH as determined by analytical SDS-PAGE were pooled and further separated by cation-exchange chromatography. The fractions pooled from the cation-exchange chromatography contained two hGH isoforms with a 2 kDa molecular mass difference according to SDS-PAGE analysis, 22 and 24 kDa hGH. The 22 and 24 kDa hGH were separated using continuous-elution preparative double-inverted gradient PAGE (PDG-PAGE) under nonreducing conditions. The preparative electrophoresis gel was composed of three stacked tubular polyacrylamide matrices, a 4% stacking gel, a 13-18% linear gradient gel, and a 15-10% linear inverted gradient gel. Fractions containing purified 24 kDa hGH were pooled and Western blot analysis displayed immunoreactivity to antihGH antibodies. PDG-PAGE provides researchers with an electrophoretic technique to preparatively purify proteins under nonreducing conditions with molecular mass differences of 2 kDa.     

New uniform algorithm to predict reversed phase retention values under different gradient conditions

A new numerical emulation algorithm was established to calculate retention parameters in RP-HPLC with several retention times under different linear or nonlinear binary gradient elution conditions and further predict the retention time under any other binary gradient conditions. A program was written according to this algorithm and nine solutes were used to test the program. The prediction results were excellent. The maximum relative error of predicted retention time was less than 0.45%.