聚乳酸类医用生物降解材料的研究进展

聚乳酸由于其突出的优点如生物相容性好、降解产物对人体无毒而倍受重视,并且在生物医学领域的应用中获得了很好的效果。本文对聚乳酸的合成及在医学方面的应用作了总结和评述,并对其在生物医学领域的应用前景作了进一步展望。     

负折射指数物质中金属线对电磁波的影响

构造两种结构负折射指数物质(NRM)，利用数值模拟计算两种结构的S参数.由于这种结构尺度比波长小，为精确利用有限积分技术(FIT)进行模拟.通过对这两种结构中金属线位置变化对金属谐振频率影响进行模拟，最后得出由于金属线与谐振环耦合，金属线对称破缺影响谐振环谐振频率和通带，并对等效负折射指数为负的频带产生影响. 关键词： 负折射率 左手物质 通带 金属线对称破缺     

Existence of a solution for a Signorini contact problem for Maxwell-Norton materials

The aim of this article is to study the quasistatic evolutionof a Maxwell–Norton three-dimensional viscoelastic solidwith contact constraints. After introducing the appropiate functionalframework, we will discretize the problem in time using an implicitscheme whose resultant variational inequality is well posed.By using monotonicity arguments together with compensated compactnesstechniques, we will prove that the corresponding discrete solutionconverges to a solution of the continuous problem.     

非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

动态柱形空穴膨胀模型及其在侵彻问题中的应用

 在侵彻问题中的应用进行了研究。通过采用相似变换求解塑性区控制方程，获得了动态柱形空穴膨胀中的弹塑性界面速度、径向应力分布、空穴表面应力的解。基于柱形空穴模型，推导了侵彻方程，并将其得到的预测结果与侵彻实验数据进行了比较。结果表明，模型的理论解与现有数据吻合得很好。 结果还显示了材料的可压缩性和塑性强化模量对柱形空穴膨胀以及侵彻阻力的影响。     

相关特征的物证检验方法及其应用

本文用多元统计的方法 ,将物证检验中彼此相关的特征转化为不相关的新特征 ,再利用L和L 检验方法 ,大大拓广了L和L 检验方法的使用范围 ,提高了破案率。     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Oblique reflection of shock waves from rigid porous materials

A study to determine the general gas dynamic behaviour associated with the impact of a shock wave on a porous wedge has been undertaken. A number of interesting features are noted. The pattern of wave reflection is shown to be significantly affected by the inflow of gas into the wedge. This has the effect of reducing the triple point trajectory angle for cases of Mach reflection and for strongly reducing the reflection angle in regular reflection. The permeability of the wedge has a significant effect on the strength of the reflected wave and in some cases this wave can be attenuated to the extent that it is almost eradicated. Pressure measurements taken under the wedge are characterized by oscillations which are of similar shape, for a given wedge, over a range of shock wave Mach numbers. It is shown that the wave transmitted into the wedge is attenuated to varying degrees depending on the material properties, and that for weak incident waves the mean propagation velocity can be less than the sound speed in the pore fluid. Photographs taken using a specially constructed wedge which allows the transmitted wave to be visualised, show that the transmitted wave is nearly plane.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

On the deformation and fracture of porous materials

The constitutive behavior of porous materials (including the yield loci, the void growth rate, the macro stress-strain relation and the strain to localization instability) is examined based on the lower bound approach proposed by the present authors. These results are then compared with the experimental and the finite element results as well as those predicted by Gurson's equations. Emphasis is placed on approaching the real behavior from the upper and the lower bound analysis. Calculation is also made on the influence of void nucleation on the critical strain to instability and a modified strain-controlled nucleation criterion is proposed. Finally the instability and fracture of AISI4340 steel in plane strain tension is examined and comparison is made between theoretical and experimental results.     

低噪音摩阻复台材料影响因素的探讨

采用动态粘弹谱仪（ＤＤＶ）、电子扫描显微镜（ＳＥＭ）和摩擦试验机等对影响摩阻复合材料制动噪音的因素进行了探讨。结果表明，摩阻材料基体的合理改性以提高其损耗角正切ｔａｎδ对减少振动、降低噪音行之有效。同时对传统解决噪音的方法，如添加固体润滑剂、橡胶共混等进行了分析比较。