Rate constants of the reactions of O(3P) atoms with Br2 and NO2 over the temperature range 220-950 K

The kinetics of the reactions of Br₂ and NO₂ with ground state oxygen atoms have been studied over a wide temperature range, T = 220-950 K, using a low-pressure flow tube reactor coupled with a quadrupole mass spectrometer: O + NO₂ → NO + O₂ (1) and O + Br₂ → Br + BrO (2). The rate constant of reaction (1) was determined under pseudo–first-order conditions, either monitoring the kinetics of O-atom or NO₂ consumption in excess of NO₂ or of the oxygen atoms, respectively: k₁ = (6.1 ± 0.4) × 10⁻¹² exp((155 ± 18)/T) cm³ molecule⁻¹ s⁻¹ (where the uncertainties represent precision at the 2σ level, the estimated total uncertainty on k₁ being 15% at all temperatures). The temperature dependence of k₁, found to be in excellent agreement with multiple previous low-temperature data, was extended to 950 K. The rate constant of reaction (2) determined under pseudo–first-order conditions, monitoring the kinetics of Br₂ consumption in excess of O-atoms, showed upward curvature at low and high temperatures of the study and was fitted with the following three-parameter expression: k₂ = 9.85 × 10⁻¹⁶ T^1.41 exp(543/T) cm³ molecule⁻¹ s⁻¹ at T = (220-950) K, which is recommended from the present study with an independent of temperature conservative uncertainty of 15% on k₂.     

Quantitative estimations of bivariate summation‐integral–type operators

In this paper, we study the approximation properties of bivariate summation‐integral–type operators with two parameters . The present work deals within the polynomial weight space. The rate of convergence is obtained while the function belonging to the set of all continuous and bounded function defined on ([0],∞)(×[0],∞) and function belonging to the polynomial weight space with two parameters, also convergence properties, are studied. To know the asymptotic behavior of the proposed bivariate operators, we prove the Voronovskaya type theorem and show the graphical representation for the convergence of the bivariate operators, which is illustrated by graphics using Mathematica. Also with the help of Mathematica, we discuss the comparison by means of the convergence of the proposed bivariate summation‐integral–type operators and Szász‐Mirakjan‐Kantorovich operators for function of two variables with two parameters to the function. In the same direction, we compute the absolute numerical error for the bivariate operators by using Mathematica and is illustrated by tables and also the comparison takes place of the proposed bivariate operators with the bivariate Szász‐Mirakjan operators in the sense of absolute error, which is represented by table. At last, we study the simultaneous approximation for the first‐order partial derivative of the function.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

1stOpt软件在蔗糖水解实验教学中的应用

将1stOpt软件用于物理化学实验蔗糖水解反应速率常数的测定中，在无需严格记录反应开始时间和测定反应终了旋光度的情况下，通过非线性拟合无需编程及公式变换就可以简单方便准确地得到反应速率常数，避免了传统数据处理方法所带来的人为误差，可以补充和改进物理化学实验的教学。     

甲型H1N1流感的死亡率高吗——Bayes计量分析框架下的建模与估算

在全球甲型H1N1流感大流行背景下,本文在充分考虑各国甲流感死亡率可能存在个体混合效应、独立效应、相关效应及空间相关效应基础上,运用Bayes计量分析框架下的模型选择标准确定描述各国甲流感死亡率的最优模型,并基于该模型对不同国家甲流感死亡率进行估算。结果显示:个体独立、空间相关效应模型能很好拟合各国甲流感疫情统计数据,利用该模型估算的全球甲流感平均死亡率为0.577%。     

A high accuracy flow segmentation method in crowded scenes based on streakline

Flow segmentation based on similar motion patterns in crowded scenes remains an open problem in computer vision due to inherent complexity and vast diversity found in such scenes. To solve this problem, the streakline framework based on Lagrangian fluid dynamics had been proposed recently. However, this framework computed optical flow field using conventional optical flow method (Lucas Kanade method) which has poor anti-interference performance, and serious deviation would be brought to the computation of optical flow field. Moreover, our experimental results show that using the formulation of streak flow similarity in this framework can result in incorrect flow segmentation. Therefore, we combine this framework with a high accurate variational model, and modify the corresponding formulation of streak flow similarity after analyzing the streakline framework in detail. Finally, an improved method is proposed to solve flow segmentation in crowded scenes. Experiments are done to compare these two methods and results verify the validity and accuracy of our method.     

Mixed convection unsteady stagnation point flow over a stretching sheet with heat transfer in the presence of variable free stream

An analysis is performed for the unsteady mixed convection flow of an incompressible viscous fluid about a stagnation point on a stretching sheet in the presence of a variable free stream. The equations of motion and energy are transformed into the ordinary differential equations by using similarity transformations. Homotopy analysis method is used for the solution of the governing problem. The results have been discussed by plots. The present values of the function are shown very close to the previous limiting solutions. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability of algebraic multigrid for Stokes problems

An investigation is made of the performance of algebraic multigrid (AMG) solvers for the discrete Stokes problem. The saddle‐point formulations are based on the direct enforcement of the fundamental conservation laws in discrete spaces and subsequently stabilised with the aid of a regular splitting of the diffusion operator. AMG solvers based on an independent coarsening of the fields (the unknown approach) and also on a common coarsening (the point approach) are investigated. Both mixed‐order and equal‐order interpolations are considered. The dependence of convergence on the ‘degree of coarsening’ is investigated by studying the ‘convergence versus coarsening’ characteristics and their variation with mesh resolution. They show a consistency in shape, which reveals two distinct performance zones, one convergent the other divergent. The transition from the convergent to the divergent zones is discontinuous and occurs at a critical coarsening factor that is largely mesh independent. It signals a breakdown in the stability of the smoothing at the coarser levels of coarse grid approximation. It is shown that the previously observed, mesh‐dependent, scaling of convergence factors, which had suggested inconsistencies in the coarse grid approximation, is not a reliable marker of inconsistency. It is an indirect consequence of the breakdown in the stability of smoothing. For stable smoothing, reduction factors are shown to be largely mesh independent. The ability of mixed‐order interpolation to permit stable smoothing and therefore to deliver mesh‐independent convergence is explained. Two expedient options are suggested for obtaining mesh‐independent convergence for those AMG codes that are based on an equal‐order interpolation. Copyright © 2012 John Wiley & Sons, Ltd.     

Evaluation of RBFs for volume data interpolation in CFD

A greedy method for choosing an optimum reduced set of control points is integrated with RBF interpolation and evaluated for the purpose of interpolating large‐volume data sets in CFD. Given a function defined at a set of points, the greedy method selects a small subset of these points that is sufficient to keep the interpolation error at all the remaining points below a chosen bound. This is equivalent to a type of data compression and would have useful storage, post‐processing, and computational applications in CFD. To test the method in terms of both the point selection scheme and the suitability of reduced control point volume interpolation, a trial application of the interpolation to velocity fields in CFD volume meshes is considered. To optimise the point selection process, and attempt to be able to capture multiple length scales, a variable support radius formulation has also been included. Structured and unstructured mesh cases are considered for aerofoils, a wing case and a wing‐body case. For smooth volume functions, the method is shown to work well, producing accurate velocity interpolations using a very small number of the cells in the mesh. For general complex fields including large gradients, the method is still shown to be effective, although large gradients require more interpolation points to be used.Copyright © 2013 John Wiley & Sons, Ltd.     

Strain rate effects on compressive behavior of covalently bonded CNT networks

In this study, strain rate effects on the compressive mechanical properties of randomly structured carbon nanotube (CNT) networks were examined. For this purpose, three-dimensional atomistic models of CNT networks with covalently-bonded junctions were generated. After that, molecular dynamics (MD) simulations of compressive loading were performed at five different strain rates to investigate the basic deformation characteristic mechanisms of CNT networks and determine the effect of strain rate on stress–strain curves. The simulation results showed that the strain rate of compressive loading increases, so that a higher resistance of specimens to deformation is observed. Furthermore, the local deformation characteristics of CNT segments, which are mainly driven by bending and buckling modes, and their prevalence are strongly affected by the deformation rate. It was also observed that CNT networks have superior features to metal foams such as metal matrix syntactic foams (MMSFs) and porous sintered fiber metals (PSFMs) in terms of energy absorbing capabilities.