Development of a solid‐phase microextraction fiber by the chemical binding of graphene oxide on a silver‐coated stainless‐steel wire with an ionic liquid as the crosslinking agent

Graphene oxide was bonded onto a silver‐coated stainless‐steel wire using an ionic liquid as the crosslinking agent by a layer‐by‐layer strategy. The novel solid‐phase microextraction fiber was characterized by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and Raman microscopy. A multilayer graphene oxide layer was closely coated onto the supporting substrate. The thickness of the coating was about 4 μm. Coupled with gas chromatography, the fiber was evaluated using five polycyclic aromatic hydrocarbons (fluorene, anthracene, fluoranthene, 1,2‐benzophenanthrene, and benzo(a)pyrene) as model analytes in direct‐immersion mode. The main conditions (extraction time, extraction temperature, ionic strength, and desorption time) were optimized by a factor‐by‐factor optimization. The as‐established method exhibited a wide linearity range (0.5–200 μg/L) and low limits of determination (0.05–0.10 μg/L). It was applied to analyze environmental water samples of rain and river water. Three kinds of the model analytes were quantified and the recoveries of samples spiked at 10 μg/L were in the range of 92.3–120 and 93.8–115%, respectively. The obtained results indicated the fiber was efficient for solid‐phase microextraction analysis.     

真空中铝单丝电爆炸的实验研究

开展了铝单丝在负极性电流脉冲作用下电爆炸特性的研究.利用皮秒激光探针,搭建了阴影、纹影和干涉的光学诊断平台,得到了不镀膜铝丝典型的能量沉积过程,在电压崩溃时刻其沉积能量为2.4 eV/atom.为了增加金属丝内的沉积能量,开展了相同电参数及金属丝尺寸下的镀膜铝丝电爆炸实验,其沉积能量可达到5 eV/atom,实现了在电压崩溃之前铝丝完全气化(完全气化所需能量为4 eV/atom).阴影图像展示了高密度丝核区域的膨胀过程,不镀膜铝丝平均膨胀速度为2.2 km/s,而镀膜铝丝因为沉积能量大,其膨胀速度约为不镀膜铝丝的2.3倍,高密度区域膨胀速度为5 km/s.由于阴影不能反映低密度等离子体的膨胀,开展了平行双丝实验,通过测量自发光辐射,估算了低密度等离子体的膨胀速度.利用条纹相机拍摄了不镀膜铝丝电爆炸过程中自发光区域的图像.纹影图像清晰地展示了不镀膜铝丝在电爆炸过程中形成的核冕结构,而镀膜铝丝电爆炸过程中核冕结构得到了一定程度的抑制.从干涉图像计算了相移,在轴对称假设下对相移进行阿贝尔逆变换,重构了三维的铝原子数密度分布.     

Hybrid process for texturization of diamond wire sawn multicrystalline silicon solar cell

Acid texture is difficult for diamond wire sawn (DWS) multicrystalline silicon (mc‐Si) wafer owing to the inhomogeneous distribution of damage layer on the surface. In this article, metal‐assisted chemical etching (MACE) has been selected for introducing a porous seeding layer to induce acid texturing etching. SEM results show that the oval pit structures coverage get obvious improvement even on the smooth areas. Owing to the further improved light absorption ability by second MACE and nanostructure rebuilding (NSR) process, nanostructured DWS mc‐Si solar cell has exhibited a conversion efficiency of 17.96%, which is 0.45% higher than that of DWS wafer with simple acid texture process. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Rashba效应对量子线中束缚磁极化子性质的影响

采用改进的线性组合算符和幺正变换相结合的方法研究了Rashba效应对抛物量子线中强耦合束缚磁极化子性质的影响.计算了抛物量子线中强耦合束缚磁极化子的有效质量和振动频率,对Rb Cl材料的数值计算结果表明:量子线中强耦合束缚磁极化子的振动频率随受限强度和回旋频率的增加而增大;有效质量与磁极化子的受限强度、回旋频率和电子面密度有关,在Rashba效应影响下有效质量随上述各量的变化曲线都发生了分裂.     

大学物理实验中用坐标纸作图的规范性

大学物理实验中,作图法是数据处理中比较重要的一种方法,用坐标纸作图是数据处理训练的必要途径,但目前不少学生手工作图并不规范。总结出作图法的6条基本规则,并通过实验数据作图的实例,分析学生较为常见的手工作图不规范表现,并提出相应的教学建议。     

碳柱热电极的制备及应用

用铅笔芯制作了不同直径的碳柱热电极,表征了碳柱热电极的电化学和温敏等各种性质。结果表明,碳柱热电极在多次加热过程中均表现出对温度变化的快速响应以及良好的热稳定性。将其应用于痕量铅的方波阳极溶出伏安法测定,65℃时灵敏度比常温高,Pb2＋浓度在1~22μg/L呈线性关系,线性回归系数r=0.995 5,检测限0.5μg/L。     

分析测试新成果(238~242)电线塑料护套的傅立叶变换红外光谱分析

采用傅立叶变换红外光谱法对21个5种不同颜色的电线塑料护套样品进行了分析.从红外光谱图中可观察到样品特征峰的峰数、峰位、相对峰面积比均有差异,但可以归纳为两大类.其中同种颜色的不同样品在红外谱图中又反映出了不同的信息,这表明在外观颜色十分相近的情况下,采用此方法能够有效的为刑事案件现场遗留的各种塑料制品提供鉴别与比对.     

Wire metamaterial based on semiconductor matrices

In this Letter, we have presented a new approach for the fabrication of nanowire media (wire metamaterials) by electrochemical methods. A^IIIB^V porous matrices (a host medium) were prepared by anodic electrochemical etching of industrial substrates. The host medium has been filled via electrochemical deposition with a metal and by means of annealing process. We have shown that this technique can be used to fabricate a nanowire medium with unique parameters (such as aspect ratio, high electric permittivity and strong χ⁽³⁾ nonlinearity near the fundamental absorption edge of the host media). (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A peculiarity of diffraction measurements using a Gaussian laser beam

Numerical modelling of the Gaussian beam diffraction by a wire near the Fraunhofer limit is presented. Two cases are considered: the case of the wire being on the axis of the beam and the case of the wire being off-axis. For the case where the wire is on the axis, the displacements of the diffracted minima are calculated. For the off-axis case, the changes in the positions of the maxima and minima and the power density are calculated. The conditions are determined at which the measurements made using a Gaussian beam can be calculated using the formula for plane waves. This work arises in connection with research being performed into the Doppler spectrum of big particles.