锥体棱镜的加工

本文简单地叙述了锥体棱镜两种加工工艺。重点介绍直接成型法加工中对角度误差~1″的控制。并提出了角度超差零件返修时的光胶方法。     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

LC Packing Materials for Pharmaceutical and Biomedical Analysis

 The author has prepared novel liquid chromatography (LC) packing materials for pharmaceutical and biomedical analysis. Those include LC packing materials for direct serum injection assays of drugs and their metabolites, LC packing materials for resolution of enantiomeric drugs, and uniformly sized molecularly imprinted polymers for drugs and their metabolites.     

Networks and chain coverings in partial orders and their products

For an arbitrary poset P, subposets {P _i : 1ik} form a transitive basis of P if P is the transitive closure of their union. Let u be the minimum size of a covering of P by chains within posets of the basis, s the maximum size of a family of elements with no pair comparable in any basis poset, and a the maximum size of an antichain in P. Define a dense covering to be a collection D of chains within basis posets such that each element belongs to a chain in D within each basis poset and is the top of at least k-1 chains and the bottom of at least k-1 chains in D. Dense coverings generalize ordinary chain coverings of poset. Let d=min {|D|–(k–1)|P|}. For an arbitrary poset and transitive basis, a convenient network model for dense coverings yields the following: Theorem 1: da, with equality iff P has a minimum chain decomposition in which every pair of consecutive elements on each chain are comparable in some basis poset. Theorem 2: usda. Theorem 3: s=d iff s=a. The most interesting special case is where the transitive basis expresses P as the product of two posets, in which case u and s measure the minimum and maximum sizes of unichain coverings and semiantichains.     

基于ZnO溶胶-凝胶固定的酪氨酸酶传感器的研制

通过使用带正电荷的ZnO溶胶-凝胶在玻碳电极表面固定酶,研制了一种简单有效的酪氨酸酶传感器。结果表明,ZnO溶胶-凝胶的等电点为酪氨酸酶的固定提供了有利的微环境,酪氨酸酶能很好地保持其生物活性。所研制的传感器达到95%稳定状态电流的时间在10 s以内。酚类化合物可通过酶催化产生的醌在-200 mV(对饱和甘汞电极)直接还原而测定,传感器对苯酚测定的灵敏度为168μA.mmol-1.L-1,线性范围为1.5×10-7~4.0×10-5mol.L-1,检出限为8.0×10-8mol.L-1。该传感器使用二周后活性仍保持原有活性的75%。     

Direct melting polycondensation and characterization of poly(ɛ-caprolactone-co-lactic acid)

A kind of biodegradable material, poly(ɛ-caprolactone-co-lactic acid) [P(CL-co-LA)] was synthesized via the direct melting polycondensation of lactic acid (LA) and ɛ-caprolactone (CL). The influences of the polycondensation time, and the catalyst type on the intrinsic viscosity of P(CL-co-LA) were also investigated. The results indicate that P(CL-co-dl-LA), with an intrinsic viscosity of 0.4733 dL/g, can be prepared by direct melting polycondensation with the molar ratio LA/CL = 3:7 at 180°C and 70 Pa for 12 h, using 0.5% (mass fraction) of SnCl₂ as the catalyst. Compared with lactide ring-opening polycondensation (ROP), the direct melting polycondensation of LA and CL is more practicable and simple. Translated from Journal of South China University of Technology, 2006, 34(7): 7–11 (in Chinese)     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.     

L—氨基酸氧化酶电极的制作及电极特性的研究

报道了一种新的Ｌ－氨基酸氧化酶电极，这种酶电极系由氨气敏电极和以氨基化玻璃布为载体的酶膜所组成；研究了固定化条件对酶膜活性的影响以及底物浓度、温度和ｐＨ对电极响应特性的影响。该电极在６．０×１０＾－５～４．０×１０＾－３ｍｏｌ／Ｌ的底物浓度范围内呈良好的线性关系，检测下限为５．０×１０＾－５ｍｏｌ／Ｌ。在最宜条件下，酶电极具有良好的稳定性。     

Acetylcholine Biosensor Based on Dendrimer Layers for Pesticides Detection

We tested a new design of an enzyme biosensor based on acetylcholinesterase (AChE) and choline oxidase (ChO) immobilized on the supported monomolecular layer composed of poly(amidoamine) (PAMAM) dendrimers of the fourth generation (G4) mixed with 1‐hexadecanethiol (HDT). The resulting enzymatic activity, measured amperometrically, was substantially depressed in the presence of the organophosphate pesticide dimethyl‐2,2‐dichlorovinylphosphate (DDVP, Dichlorvos), carbamate pesticides carbofuran and carbamate drug eserine. The detection limits (1.3×10^?3 ppb for DDVP, 0.01 ppb for carbofuran and 0.03 for eserine) were considerably lower than so far reported for AChE based amperometric and potentiometric sensors. The relative simple protocol of biosensor preparation, high sensitivity and stability is very promising for determination of environmental pollutants in field conditions.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.