Stress Singularity in an Elastic Cylinder of Cylindrically Anisotropic Materials

The issue of stress singularity in an elastic cylinder of cylindrically anisotropic materials is examined in the context of generalized plane strain and generalized torsion. With a viewpoint that the singularity may be attributed to a conflicting definition of anisotropy at r=0, we study the problem through a compound cylinder in which the outer cylinder is cylindrically anisotropic and the core is transversely isotropic. By letting the radius of the core go to zero, the cylinder becomes one with the central axis showing no conflict in the radial and tangential directions. Closed-form solutions are derived for the cylinder under pressure, extension, torsion, rotation and a uniform temperature change. It is found that the stress is bounded everywhere, and singularity does not occur if the anisotropy at r=0 is defined appropriately. This revised version was published online in July 2006 with corrections to the Cover Date.     

气缸垫对机体受力和缸套变形影响的实验研究

某四缸柴油机在试制中出现机体裂纹现象，为保证内燃机正常工作，机体裂纹问题急待处理．应用力学理论对此进行分析，得出机体裂纹是由机体受力不均匀引起的结论．同时采用实验应力分析方法，对两种四缸柴油机机体进行了对比实验研究，在实验中发现了缸垫对机体受力和缸套变形的影响，从而提出了一种有效的改进方法，使机体的应力有明显下降，并不再出现裂纹，也未出现漏油、漏气和活塞拉缸等不良现象，大大提高了产品可靠性．     

Direct Statistical Simulation of a Supersonic Flow of a Binary Mixture of Rarefied Gases around a Transversely Positioned Cylinder

A supersonic flow of a binary mixture of gases in a wide range of rarefaction (from a flow with a Knudsen number K _n = 0.1 to a free-molecular flow) around a cylinder is studied by means of direct statistical Monte Carlo simulations (DSMC method). The influence of a small fraction of heavy particles in a light gas flow on the region of significant nonequilibrium near the cylinder and on the heat flux is considered.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 53–59, September–October, 2005.     

多层电磁弹性圆柱壳内波的轴向传播

对多层电磁弹性圆柱壳内波的轴向传播进行了分析。根据柱坐标系下电磁弹性多层结构的几何方程、平衡方程和本构方程,推导出了两个层间变量所满足的状态方程。通过状态方程的解和层间变量连续性条件,得到了多层圆柱体内外表面层间变量的传递关系。最后利用边界条件,导出了波在传播时所满足的频散方程,并求得该结构的模态参数。以一个三层的压电/压磁材料组成的柱壳结构作为数值算例,计算出波在其中轴向传播时的频散关系和模态参数,并对计算结果进行了分析。     

线性强化材料厚壁圆筒的统一极限分析

运用统一强度理论对承受内压的拉压屈服强度不同的线性强化材料的厚壁圆筒进行了极限载荷分析，得到了适用于多种材料的厚壁圆筒极限载荷的统一解析式．     

Unsteady interaction of shock wave diffracting around a circular cylinder in air

The reflection and diffraction of a planar shock wave around a circular cylinder are a typical problem of the complex nonlinear shock wave phenomena in literature. It has long been studied experimentally, analytically as well as numerically. Takayama in 1987 obtained clear experimental pictures of isopycnics in shock tube under the condition that the impinging shock wave propagates as far as 3 diameters away from the cylinder. To know more completely the whole unsteady process, it is desirable to get experimental results in a region which is more than 10 diameters away from the cylinder. This is what has been done in this paper by using the pulsed laser holographic interferometry for several shock Mach numbers of the impinging shock. Results for several moments are shown, giving more knowledge about the whole unsteady flow field. This is useful for a reliable and complete understanding of the changing force acting on the cylinder, and provides interesting data to check the performance of many recently developed high resolution numerical methods for unsteady shock wave calculation. The project suported partially by National Natural Science Foundation of China     

Optical investigation of the heat transfer from a rotating cylinder in a cross flow

The heat transfer from a rotating cylinder in an air-cross flow was investigated by purely optical measuring techniques. Flow velocities were measured by a two-dimensional LDV both in the vicinity of the cylinder and in the boundary layer. A new optical device based on light-deflection in a temperature field was developed to examine local temperature gradients in the boundary layer of the rotating cylinder. Finally, a Michelson-interferometer was installed to produce real-time pictures of isothermal lines around the heated cylinder. The impact of rotation on flow patterns, boundary layer behaviour and heat transfer could be clearly identified. It appears that the velocity-ratio acts like an independent parameter, in that flow patterns correspond to this dimensionless number. Furthermore, it seems that rotation dominates over cross flow, both fluid-dynamically and thermally above = 2.This work was carried out at the University of the Federal Armed Forces in Munich/Germany.     

Bi-functional optimization of actively cooled, pressurized hollow sandwich cylinders with prismatic cores

All metallic, hollow sandwich cylinders having ultralight two-dimensional (2D) prismatic cores are optimally designed for maximum thermo-mechanical performance at minimum mass. The heated cylinder is subjected to uniform internal pressure and actively cooled by forced air convection. The use of two different core topologies is exploited: square- and triangular-celled cores. The minimum mass design model is so defined that three failure modes are prevented: facesheet yielding, core member yielding, and core member buckling. The intersection-of-asymptotes method, in conjunction with the fin analogy model, is employed to build the optimization model for maximum heat transfer rate. A non-dimensional parameter is introduced to couple the two objectives—structural and thermal—in a single cost function. It is found that the geometry corresponding to maximum heat transfer rate is not unique, and square-celled core sandwich cylinders outperform those having triangular cells. The eight-layered sandwich cylinders with square cells have the best overall performance in comparison with other core topologies. Whilst a sandwich cylinder with shorter length is preferred for enhanced thermo-mechanical performance, the influence of the outer radius of the cylinder is rather weak.     

圆柱绕流的非线性动力学

本文利用非线性动力学的概念和方法来研究粘性不可压缩流体的二维圆柱绕流问题．计算了定常流失稳以及出现混沌的临界雷诺数，并估计了混沌解的一些统计特征．