离轴球形粒子对高斯波束的散射光通量的计算

利用矢量球谐函数展开的方法,研究了离轴球形粒子对椭圆高斯波束的散射。根据其远区散射场的形式,得出了归一化散射场的斯托克斯参量(散射强度)与颗粒直径、折射率以及散射角的关系。建立了计算离轴球形粒子对高斯波束散射通量的解析模型,计算了散射光在任意散射方向上的光通量,得到了前向任意立体角内散射通量的计算公式,为激光散射探测提供了理论依据。     

Secret Sharing Schemes with Detection of Cheaters for a General Access Structure

In a secret sharing scheme, some participants can lie about the value of their shares when reconstructing the secret in order to obtain some illicit benefit. We present in this paper two methods to modify any linear secret sharing scheme in order to obtain schemes that are unconditionally secure against that kind of attack. The schemes obtained by the first method are robust, that is, cheaters are detected with high probability even if they know the value of the secret. The second method provides secure schemes, in which cheaters that do not know the secret are detected with high probability. When applied to ideal linear secret sharing schemes, our methods provide robust and secure schemes whose relation between the probability of cheating and the information rate is almost optimal. Besides, those methods make it possible to construct robust and secure schemes for any access structure.     

大面积玻璃RPC模型与性能测试

介绍了可用于粒子探测的大面积玻璃高阻板探测器RPC(Resistive Plate Chamber).使用两块间隔2mm的普通浮法玻璃作为电极,其中充入流动的混合气体(氩气+异丁烷+F134A),工作高压约9600V;性能测试结果,其单室效率可达97%,时间分辨可达到1.8ns.     

因特网防御DoS攻击技术评述Ⅰ--攻击分类与特征·包过滤·攻击检测与防御

概述了因特网上DoS攻击的相应分类及基本特征，评述了包过滤、攻击检测及防御技术的最新成果．前一部分介绍了入口过滤、基于路由的过滤网和有效源地址强制协议．后一方面主要讨论了适合于检测攻击包的技术，介绍了新近提出的频谱分析方法和泛滥检测系统．简要评述了已有的防御SYN泛滥攻击的技术措施，介绍了Cisco的TCP拦截技术，提出了改进策略．     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

On the Solution of Discontinuous IVPs by Adaptive Runge–Kutta Codes

In this paper an automatic technique for handling discontinuous IVPs when they are solved by means of adaptive Runge–Kutta codes is proposed. This technique detects, accurately locates and passes the discontinuities in the solution of IVPs by using the information generated by the code along the numerical integration together with a continuous interpolant of the discrete solution. A remarkable feature is that it does not require additional information on the location of the discontinuities. Some numerical experiments are presented to illustrate the reliability and efficiency of the proposed algorithms.     

淋洗液发生器离子色谱抑制电导法测定甜味剂

采用淋洗液发生器阴离子交换-抑制电导检测法,同时分离和检测阿思巴甜、甜蜜素、安赛蜜和糖精4种常见的甜味剂.由于采用了淋洗液发生器,使背景电导大大降低,可以实现甜味剂的高灵敏度检测和分离.该方法具有良好的重现性、线性关系和较低的检测限.阿思巴甜、甜蜜素、安赛蜜和糖精的检测限分别是:1.27、0.045、0.033、0.063 mg/L;样品测定的回收率分别为99.7%、102.8%、98.6%、103.5%.