Heteronuclear decoupling under fast MAS by a rotor-synchronized Hahn-echo pulse train

A new heteronuclear decoupling mechanism under fast magic-angle spinning MAS is introduced. It is based on refocusing the coherences responsible for the dephase of low-gamma nuclei ((13)C, (15)N) transverse spin-polarization in the presence of strongly dipolar-coupled protons, and has the advantage that can be implemented by pulsed techniques, with all the benefits resulting from a reduced duty cycle compared with conventional decoupling by continuous rf irradiation. The decoupling efficiency of a simple rotor-synchronized Hahn-echo pulse train is analyzed both theoretically and experimentally. It was found that a substantial improvement in sensitivity and resolution can be achieved in compounds with small (1)H chemical shielding parameters even at moderate sample spinning, and some interesting applications are shown. It is also shown that much faster spinning frequencies, or alternative refocusing sequences, are needed for applications on rigid organic solids, i.e., in systems with larger (1)H chemical shifts.     

Spin-lattice relaxation and a fast T1-map acquisition method in MRI with transient-state magnetization

The magnetization under the spin-lattice relaxation and the nuclear magnetic resonance radiofrequency (RF) pulses is calculated for a signal RF pulse train and for a sequence of multiple RF pulse-trains. It is assumed that the transverse magnetization is zero when each RF pulse is applied. The result expressions can be grouped into two terms: a decay term, which is proportional to the initial magnetization M0, and a recovery term, which has no M0 dependence but strongly depends on the spin-lattice relaxation and the equilibrium magnetization Meq. In magnetic resonance pulse sequences using magnetization in transient state, the recovery term produces artifacts and can seriously degrade the function of the preparation sequence for slice selection, contrast weighting, phase encoding, etc. This work shows that the detrimental effect can be removed by signal averaging in an eliminative fashion. A novel fast data acquisition method for constructing the spin-lattice relaxation (T1) map is introduced. The method has two features: (i) By using eliminative averaging, the curve to fit the T1 value is a decay exponential function rather than a recovery one as in conventional techniques; therefore, the measurement of Meq is not required and the result is less susceptible to the accuracy of the inversion RF pulse. (ii) The decay exponential curve is sampled by using a sequence of multiple pulse-trains. An image is reconstructed from each train and represents a sample point of the curve. Hence a single imaging sequence can yield multiple sample points needed for fitting the T1 value in contrast to conventional techniques that require repeating the imaging sequence for various delay values but obtain only one sample point from each repetition.     

NMR-microscopy with TrueFISP at 11.75T

The purpose of this paper is to demonstrate that a fully balanced gradient echo technique (TrueFISP) can be used for microscopic experiments at high static magnetic field strengths. TrueFISP experiments were successfully performed on homogeneous and inhomogeneous objects at 11.75T. High-resolution TrueFISP images were obtained from phantoms, plants, formalin-fixed samples, and from an isolated beating rat heart with an in-plane resolution of 78 micro m and a slice thickness of 500 micro m. The signal-to-noise ratio (SNR) gain of TrueFISP compared to conventional gradient echo or spin echo sequences will allow faster acquisition times or an improvement in spatial resolution for microscopic experiments.     

大型Schmidt望远镜光学系统调整方法

安装于紫金山天文台盱眙观测站用以观测近地天体的大型Schmidt望远镜,采用了平场Schmidt光学系统,改正镜通光口径为1m,球面反射镜口径为1.2m,焦距为1.8m,接收器用了4K×4K的高灵敏度CCD。本文叙述了该仪器光轴调整的方法及调整后观测获得的初步结果。叙述了望远镜光轴校正方法、校正结果、CCD靶面的调整及望远镜极轴高度、方位的调整及相应的照片。经实际观测的结果是:露光1s可拍到18等星;露光4s可拍到19.3等星;露光20s可拍摄到21.2等星。     

飞秒激光-等离子体相互作用中快电子能量分布

 采用不同量程的电子谱仪与LiF热释光探测器相配合，测量了飞秒激光 等离子体相互作用中产生的快电子能量分布。结果显示快电子能量分布的一致性和多个重要特征与国外同类实验和计算机模拟结果相似。快电子能谱在低能处产生凹陷是由于冷电子的回流产生的；几种加速机制共同作用是能谱在100~350 keV范围内出现平台的原因；快电子的有效温度较好地满足共振吸收的温度定标律是由于反射激光加速与共振吸收机制均是通过朗道阻尼或波破对电子进行加速的。     

Nanoscale intrinsic heterogeneities in Ag-Ge-Se glasses and their correlation with physical properties

Ag-Ge-Se glass forming system is dominated by liquid immiscibility. Glasses in the Se-GeSe₂-Ag₂Se triangle may have different morphologies according to their composition. In this work inhomogeneous morphology is observed in Ag_x(Ge_ySe_1−y)_100−x bulk glasses with y = 0.20, 0.25 at.% fraction. Electron microscopy reveals that the scale of heterogeneity strongly depends on the sample composition. The physical properties of these glasses are also dependent on their composition and can be easily correlated to their morphology. Accordingly, the electric conductivity evolves from semiconducting to ionic conductivity whereas a percolation transition occurs in a narrow Ag concentration range.Mössbauer spectrometry let us to analyse the local order of these intrinsically heterogeneous glasses employing ⁵⁷Fe as a probe.     

Speckle interferometry methods for displacement and strain measurements using photorefractive crystal

Photorefractive crystals offer several attractive features such as high resolution and in situ processing. As the images are erasable, these crystals are suitable for read–write applications and hence find potential use in speckle photography, image processing and holography. The barium titanate (BaTiO₃) crystal as recording medium has been extensively used as a novelty filter for real-time in-plane displacement measurements employing two-beam coupling configuration. This paper presents new optical configurations in speckle shear photography to measure in-plan displacement and the strain in real time using BaTiO₃ crystal as recording medium. Speckle photography studies are made using a simple two-beam coupling configuration. In speckle shear photography, a diffused object illuminated with two parallel narrow laser beams is imaged inside the crystal, and a pump beam is added at this plane. The speckle patterns due to each beam and the pump beam produce index gratings. When the object is deformed, the speckle patterns shift consequently. We now have four speckle fields: two generated from the interaction of pump beam with the index gratings and two pertaining to deformed states directly transmitted through the crystal. Thus, the fields from respective points on the object interfere after passage through the crystal and produce the Young's fringe patterns. Due to strain, the fringes in each pattern are of different width and orientation, resulting in the generation of a Moiré pattern. The strain is obtained from the width and orientation of the fringes in the Moiré pattern. The experiments are conducted on a specimen with a notch, which is subjected to tensile loading. The in-plane displacement is measured separately in another experiment. The above studies are carried out at Nd–Yag laser.     

Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.     

Prevention of blow-up by fast diffusion in chemotaxis

In this paper, we study a strongly coupled parabolic system with cross diffusion term which models chemotaxis. The diffusion coefficient goes to infinity when cell density tends to an allowable maximum value. Such ‘fast diffusion’ leads to global existence of solutions in bounded domains for any given initial data irrespective of the spatial dimension, which is usually the goal of many modifications to the classical Keller–Segel model. The key estimates that make this possible have been obtained by a technique that uses ideas from Moser's iterations.     

Construction of triangular DP surface and its application

In this paper, a new type of bivariate basis on a triangle is presented, which is constructed by extending the univariate NTP basis proposed by Delgado and Peña. Some algebraic properties and its recursive formulae are given. Then a new type of surfaces that is called triangular DP surface is defined, and its recursive evaluation algorithm is obtained. Also, in the case of low degree, its subdivision algorithm and degree elevation algorithm are derived. It is shown that this type of surfaces is obviously more advantageous than triangular Bézier surface, and hence extremely useful for geometric design, especially for the situation in which the surface needs to be evaluated quickly.