Application of FTIR Spectroscopy for Identification of Blood and Leukemia Biomarkers: A Review over the Past 15 Years

Abstract

Fourier transform infrared (FTIR) spectroscopy is an effective and nondestructive method for monitoring cellular alterations. Combining the advantages of FTIR spectroscopy with the challenge of cellular characterization, the main objective of this review is to collect information related to the spectroscopic identification of blood cells, focusing on specific biochemical features of leukemia cells detected through FTIR spectral analysis. Some interesting results obtained by different authors regarding human promyelocytic leukemia, white blood cells, chronic lymphocytic leukemia, and human peripheral blood mononuclear cells are presented. In addition, the characterization of two types of cells, namely, leukemia T and a healthy human blood cells, is reported and the identification of biochemical markers provides important information that, associated with clinical examination, can assist in the diagnosis of diseases.     

Spectroscopic techniques in medicine: The future of diagnostics

Spectroscopic techniques have been finding increasing applications in the field of biomedicine especially in the field of disease diagnosis and monitoring in spite of the rapid emergence of several molecular biology based techniques. The significance of spectroscopy techniques and the possibility of using some of the underutilized regions of the electromagnetic radiations are discussed in this review. While previous reviews have already dealt with the potential of Fourier transform infrared spectroscopy-based (FTIR) techniques for clinical applications, the present review addresses the lacunae of the techniques along with its future trends that may make it a technique routinely applied in clinical settings.     

Study on the Structure of TiO2 Thin Film by Means of Diffuse Reflectance Infrared Fourier Transform Spectroscopy

The diffuse reflectance infrared spectra of TiO₂ thin films deposited on different base materials and formed under different experimental conditions(temperature, ratio of tetrabutyl titanate to water and adulteration of different metallic elements) were determined and the structure of the films were discussed.     

Hydrogenation of acetylene into ethane–ethene mixtures over modified Pd–alumina catalysts

1. Download : Download high-res image (138KB)
2. Download : Download full-size image

     

Formation of polyketone particle structure by hexafluoroisopropanol solvent evaporation and effects of plasticizer addition

Few solvents are capable of dissolving polyketones (PKs). 1,1,1,3,3,3‐Hexafluoro‐2‐propanol (hexafluoroisopropanol, HFIP) is a better solvent than trifluoroethanol and m‐cresol. When HFIP was evaporated from a PK/HFIP solution, a porous cast‐film with a microparticle structure was formed because the isotactic PKs adopted a helical conformation, and convection during evaporation of the high polarity and low‐boiling‐point HFIP caused aggregation and rolling of the polymer molecules. The addition of plasticizer suppressed particle formation, improving the surface structure and mechanical properties of the film. In particular, the dielectric properties of the film improved significantly. This will enable PKs, which are rigid insulating materials, to be used as dielectric materials, broadening their range of applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 887–892     

The structural changes in crystalline cellulose and effects on enzymatic digestibility

The enzymatic hydrolysis of cellulose I achieves almost complete digestion when sufficient enzyme loading as much as 20 mg/g-substrate is applied. However, the yield of digestion reaches the limit when the enzyme dosage is decreased to 2 mg/g-substrate. Therefore, we have performed three pretreatments such as mercerization, dissolution into phosphoric acid and EDA treatment. Transformation into cellulose II hydrate by mercerization and dissolution into phosphoric acid were not sufficient because substrate changed to highly crystalline structure during saccharification. On the other hand, in the case of crystalline conversion of cellulose I to III_I by EDA, almost perfect digestion was achieved even in enzyme loading as small as 0.5 mg/g-substrate, furthermore, hydrolyzed residue was typical cellulose I. The structural analysis of substrate after saccharification provides an insight into relationships between cellulose crystalline property and cellulase toward better enzymatic digestion.     

FT-IR Study of the Adsorption of Propane and Propene on V2O5/γ-Al2O3 Catalyst

It has been observed on the oxidized V₂ O₅/γ-Al₂ O₃ that C₃H₆ form alkoxides which were converted to acetone during the desorption of adsorbate phase at 373 K. C₃ H₈ may form π-complexes on the reduced form of the same catalyst. However, the intensities of the bands in the adadsorption of C₃ H₈ were very weak as compared with the case of C₃ H₆ adsorption. Therefore, it was not reasonable to assign these bands clearly as any of the surface type species.     

Induced Electronic and Thermal Effects of 86 MeV Nickel Ions in Bisphenol-A Polycarbonate

Bisphenol-A polycarbonate films were irradiated with 86 MeV swift heavy nickel ions at varying fluences, ranging from 1 × 10¹¹ to 1 × 10¹³ ions cm^?2, under vacuum at room temperature, to analyze the induced electrical and thermal modifications. AC conductivity measurements and UV-visible spectroscopy, Fourier transform infra-red (FTIR) spectroscopy, thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) techniques were applied to analyze the changes. A significant, exponential increase in conductivity at higher frequency was observed with the increase of nickel ion fluence. UV-visible analysis corroborated the results of the AC conductivity measurement, revealing the increase in size of the carbon clusters embedded in the polymer network, with the increase of heavy ion fluence. FTIR analysis revealed the formation of alkene and alkyne end groups at higher doses, which further supported the suggestion that the variation in electrical properties induced by the ion irradiation of the polymer was due to development of a carbonaceous phase inside the polymer due to the irradiation. Thermal analysis, i.e., TGA and DSC patterns, showed that chain-scission was the leading phenomena in the heavy ion-irradiated polycarbonate samples, resulting in degradation of their thermal stability.     

Evaluation of nano-slot antenna for mid-infrared detectors

To improve the response performance of superconducting infrared detectors, we propose using a photonic antenna with a micro-detector in conjunction with a nano-structure. In this paper, we report evaluation results that show the basic characteristics of a photonic antenna in the mid-infrared region. The antenna consists of a nano-slot antenna and a thin-film load resistance placed in the center of the antenna. The antennas were designed for operation at approximately several tens of THz by using an electromagnetic simulator. Through measurements of the spectral reflectance characteristics, clear absorptions caused by the antenna properties were observed at approximately 50 THz, and high polarization dependencies were also observed. The results of the simulation qualitatively agreed with the results of the experiment. The effective area of the antenna was also evaluated and was found to be approximately 3.5 μm² at 54 THz.     

Structural, optical and electromagnetic properties of aluminum-clay nanocomposites

Aluminum pillared and exchanged bentonite particles were synthesized by the ion exchange method. The characteristics of the particles were investigated by Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDS), reflectance spectrophotometer (RS) and electromagnetic transition instrument (ETI). FTIR spectra showed a successful incorporation of Al complexes into the clay interlayer. The TGA result demonstrated an improvement in thermal stability of the Al-pillared clay compared with the untreated particles. SEM and EDX results showed the presence of aluminum aggregates on the surface of clay. It was also found that Al ions affect electromagnetic properties of the clay particles.