基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

超高效合相色谱法快速检测塑料食品接触材料中13种紫外吸收剂

建立了一种同时检测塑料食品接触材料中13种紫外吸收剂的超高效合相色谱法。以甲醇为溶剂对塑料食品接触材料样品进行超声提取，经C18固相萃取柱净化，过0.22 μm有机滤膜，采用超高效合相色谱仪分析。选择ACQUTY UPC² HSS C18 SB色谱柱（150 mm×3.0 mm，1.8 μm），以超临界二氧化碳为流动相，异丙醇为改性剂进行梯度洗脱，在最优色谱条件下，13种紫外吸收剂能够在4 min内实现有效分离。结果表明，在各自线性范围内，13种紫外吸收剂的线性关系良好，标准曲线相关系数不低于0.9985，检出限（S/N=3）为0.05~0.15 mg/kg，加标回收率为86.8%~115.7%，相对标准偏差为0.73%~5.61%。该方法快速简便，准确可靠，同时大大减少了有机溶剂的消耗，可用于塑料食品接触材料中13种紫外吸收剂的快速检测。     

小分子配体诱导合成N,N-二苄基二硫代氨基甲酸镉(II)配合物及晶体结构

4,4'-联吡啶与二苄基二硫代氨基甲酸镉配合物[Cd(DBTC)₂]₂ (1)反应得到加合物[Cd(DBTC)₂(4,4'-bipy)] (2) (DBTC＝N,N-二苄基二硫代氨基甲酸), 通过晶体结构分析及红外光谱等研究其结构与性质. 结果表明: 引入小分子配体会破坏[Cd(DBTC)₂]₂ (1)的二聚结构, 加入吡啶则得到单核的吡啶加合物[Cd(DBTC)₂py] (3), 而引入4,4'-联吡啶后其结构变为新型的一维链状结构的配位聚合物2, 这种结构在二硫代氨基甲酸金属配合物中少见报道. 也比较了不同配体如吡啶及4,4'-联吡啶对Cd(II)及Zn(II)配合物结构的影响.     

Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS

A mild, efficient and convenient extraction method of using 2-mercaptoethanol contained extractant solution combined with an incubator shaker for determination of mercury species in biological samples by HPLC–ICP-MS has been developed. The effects of the concentration of 2-mercaptoethanol, the composition of the extractant solution and the shaking time on the efficiency of mercury extraction were evaluated. The optimization experiments indicated that the quantitative extraction of mercury species from biological samples could be achieved by using 0.1% (v/v) HCl, 0.1% (v/v) 2-mercapoethanol and 0.15% (m/v) KCl extractant solution in an incubator shaker for shaking overnight (about 12 h) at room temperature. The established method was validated by analysis of various biological certified reference materials, including NRCC DOLT-3 (dogfish liver), IAEA 436 (tuna fish), IAEA MA-B-3/TM (garfish filet), IAEA MA-M-2/TM (mussel tissue), GBW 08193 (bovine liver) and GBW 08572 (prawn). The analytical results of the reference materials were in good agreement with the certified or reference values of both methyl and total mercury, indicating that no distinguishable transformation between mercury species had occurred during the extraction and determination procedures. The limit of detection (LOD) for methyl (CH₃Hg⁺) and inorganic mercury (Hg²⁺) by the method are both as 0.2 μg L⁻¹. The relative standard deviation (R.S.D.s) for CH₃Hg⁺ and Hg²⁺ are 3.0% and 5.8%, respectively. The advantages of the developed extraction method are that (1) it is easy to operate in HPLC–ICP-MS for mercury species determination since the extracted solution can be directly injected into the HPLC column without pH adjustment and (2) the memory effect of mercury in the ICP-MS measurement system can be reduced.     

铁氧簇合物[Fe11O6(OH)6(O2CCH3)15](C5H5N)6的结构和磁性质

通过三核铁盐[Fe₃O(O₂CCH₃)₆(H₂O)₃]C1在吡啶溶液中水解聚合得到铁氧簇合物[Fe₁₁O₆(OH)₆(O₂CCH₃)₁₅](C₅H₅N)₆。晶体结构表明11个铁离子(Ⅲ)中6个位于扭曲的三棱柱的顶点上，其余5个分别位于三棱柱的每个面之外。铁离子(Ⅲ)之间以氧桥或者羟基氧桥相连。变温磁化率证实铁离子(Ⅲ)之间是反铁磁耦合的。     

Isolation of lappaconitine from Aconitum septentrionale roots by adsorption

Extracts of Aconitum septentrionale Koelle roots obtained using chloroform, isopropanol, and ethanol were purified using chloroform and basic γ-Al₂O₃. Ballast materials were selectively adsorbed by γ-Al₂O₃, increasing the mass fraction of lappaconitine in the extract. The ethanol extract was purified most. The degree of lappaconitine extraction by chloroform was unaffected by the presence of γ-Al₂O₃. However, the mass fraction in the extract and lappaconitine extraction from Aconitum septentrionale were increased more than twice. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 274–276, May–June, 2006.     

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

结合三维静电势参数研究二取代苯的定量结构－疏水性关系

对含有常见取代基的92个二取代苯化合物进行了结构优化和静电势及其导出参数的计算,运用多元线性回归方法对化合物的疏水常数与分子的结构参数进行了关联.结果表明,分子表面负静电势的加和ΣV－S、分子空间内最负的静电势Vmin、表面最大静电势Vs,max以及分子体积V、极性表面积APS和分子的偶极密度μ/V这六个参数,可以很好地用于表达这些化合物疏水性与分子结构间的定量关系,而不用具体考虑分子中极性基团间的相互作用.用建立起来的QSPR(quantitative structure-property relationship)关系式对111个类似化合物的疏水性进行了预测,获得了满意的结果.     

Protein secondary structure and stability determined by combining exoproteolysis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the post-genomic era, several projects focused on the massive experimental resolution of the three-dimensional structures of all the proteins of different organisms have been initiated. Simultaneously, significant progress has been made in the ab initio prediction of protein three-dimensional structure. One of the keys to the success of such a prediction is the use of local information (i.e. secondary structure). Here we describe a new limited proteolysis methodology, based on the use of unspecific exoproteases coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), to map quickly secondary structure elements of a protein from both ends, the N- and C-termini. We show that the proteolytic patterns (mass spectra series) obtained can be interpreted in the light of the conformation and local stability of the analyzed proteins, a direct correlation being observed between the predicted and the experimentally derived protein secondary structure. Further, this methodology can be easily applied to check rapidly the folding state of a protein and characterize mutational effects on protein conformation and stability. Moreover, given global stability information, this methodology allows one to locate the protein regions of increased or decreased conformational stability. All of this can be done with a small fraction of the amount of protein required by most of the other methods for conformational analysis. Thus limited exoproteolysis, together with MALDI-TOF MS, can be a useful tool to achieve quickly the elucidation of protein structure and stability.