Sonochemiluminescence observation and acoustic detection of cavitation induced by pulsed HIFU at a tissue–fluid interface

The aim of this study is to investigate the mechanism of the erosion process induced by 1.2 MHz pulsed high-intensity focused ultrasound (pulsed HIFU). By using Sonochemiluminescence (SCL) photograph, the initiation and maintenance of active cavitation were observed. In order to understand the role of both inertial cavitation and stable cavitation, a passive cavitation detection (PCD) transducer was used. Since the exposure variables of HIFU are important in the controlled ultrasound tissue erosion, the influence of pulse length (PL) and duty cycle (DC, T_on:T_off) has been examined. The results of tissue hole, SCL observation and acoustic detection revealed that the erosion was highly efficient for shorter PL. For higher DCs, the area of SCL increased with increasing PL. For lower DCs, the area of SCL increased with increasing PL from 10 to 20 μs and then kept constant. For all PLs, the intensity of SCL decreased with lower DC. For all DCs, the intensity of SCL per unit area (the ratio of SCL intensity to SCL area) also decreased with increasing PL from 10 to 80 μs, which suggested that the higher the intensity of SCL is, the higher the efficiency of tissue erosion is. At DC of 1:10, the position of the maximum pixel in SCL pictures was distant from the tissue–fluid interface with the increasing PL because of shielding effect. By the comparison of inertial cavitation dose (ICD) and the stable cavitation dose (SCD), the mechanisms associated with inertial cavitation are very likely to be the key factor of the erosion process.     

TEM study of the deformation structures around nano-scratches

An in-plane transmission electron microscopy (TEM) investigation carried out on nano-scratches made in a Ni₃Al foil revealed a high dislocation density within the scratch core, resulting in severe crystal rotations. The amount and sense of rotation were found to be asymmetrical about the longitudinal centre line of the scratch. Cross-sectional TEM analysis revealed that almost all the dislocations were confined within a semicircular zone having a radius similar to the calculated tip-sample contact size during scratching, in agreement with the in-plane TEM observations.     

Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens

Fracture experiments using micrometer-sized notched cantilevers were conducted to investigate the possibility of determining fracture mechanical parameters for the semi-brittle material tungsten. The experiments were also used to improve the understanding of semi-brittle fracture processes for which single crystalline tungsten serves as a model material. Due to the large plastic zone in relation to the micrometer sample size, linear elastic fracture mechanics is inapplicable and elastic-plastic fracture mechanics has to be applied. Conditional fracture toughness values J _Q were calculated from corrected force vs. displacement diagrams. Crack growth was accessible by direct observation of in-situ experiments as well as with the help of unloading compliances. As a further tool, fracture toughness can be determined via crack tip opening displacement. The micro samples behave more ductile and exhibit higher fracture toughness values compared to macro-sized single crystals and fail by stable crack propagation.     

原子力显微镜探针悬臂几何结构变化对高次谐波信息增强的研究

轻敲模式原子力显微镜高次谐波信号包含待测样品表面纳米力学特性等方面的信息, 但是传统原子力显微镜的高次谐波信号非常微弱. 里兹法证明在探针悬臂的特定位置打孔可以实现探针的内共振从而增强高次谐波信号强度. 本文通过有限元仿真计算获得探针第一共振频、第二共振频及其比值随着孔的尺寸和位置变化的规律. 在实验上通过聚焦离子束在探针悬臂上打孔使其第二共振频约为第一共振频的6倍, 提高了第6次谐波信号的信噪比, 并在实验室研制的高次谐波成像实验装置上获得了6次谐波图像. 关键词： 轻敲模式原子力显微镜 探针悬臂几何结构 高次谐波 聚焦离子束加工     

Artinian Serial Modules over Commutative (or,Left Noetherian) Rings are at Most One Step Away from Being Noetherian

We introduce and study the concept of dual perfect dimension which is a Krull-like dimension extension of the concept of acc on finitely generated submodules. We observe some basic facts for modules with this dimension, which are similar to the basic properties of modules with Noetherian dimension. For Artinian serial modules, we show that these two dimensions coincide. Consequently, we prove that the Noetherian dimension of non-Noetherian Artinian serial modules over the rings of the title is 1.     

Characteristic Elements of Unimodular -lattices

Characteristic elements have been useful in the classification of unimodular lattices over the integers. This article gives an explicit formula for characteristic elements of a lattice in terms of a basis for the lattice and the dual of that basis.     

Perfect Pairs of Ideals and Duals in Numerical Semigroups

This article considers numerical semigroups S that have a nonprincipal relative ideal I such that μ _S (I)μ _S (S ? I) = μ _S (I + (S ? I)). We show the existence of an infinite family of such pairs (S, I) in which I + (S ? I) = S\{0}. We also show examples of such pairs that are not members of this family. We discuss the computational process used to find these examples and present some open questions pertaining to them.     

A Remark on Kleiman–Piene's Question for Gauss Maps

We discuss some algebraic properties of the monoid generated by (left) translations in left distributive structures.This furnishes methods for enriching the original structure with a compatible associative product.     

Dual electrochemical microsensor for simultaneous measurements of nitric oxide and oxygen: Fabrication and characterization

A planar-type amperometric dual microsensor was developed for the simultaneous measurement of the nitric oxide (NO) and oxygen (O₂) concentrations. The sensor (overall diameter = 500 μm) consisted of a dual working electrode (WE) containing two platinized platinum microdisks (25 μm diameter, WE1, WE2, distance between two disks > 330 μm) and a Ag/AgCl wire reference electrode covered with an expanded poly(tetrafluoroethylene) gas-permeable membrane. The differentiation and concurrent measurements of NO and O₂ were obtained successfully using two sensing WEs with different applied potentials (+0.75 V for WE1 and −0.4 V for WE2). Cross-talk between WE1 and WE2 was eliminated with an optimized internal solution composition. Linear dynamic range, selectivity, sensitivity, detection limit (<5 nM for NO; <500 nM for O₂), and stability (>50 h) were evaluated.     

Capillary electrophoresis with dual laser detection in separation of amplified fragment length polymorphism fragments

We are presenting the application of CE technique with dual‐channel LIF detection for the simultaneous separation of DNA fragments labeled with two different fluorescence dyes. The optimal conditions of the analysis were determined for the separation of amplified fragment length polymorphism (AFLP) fragments labeled with 5′‐6‐carboxyfluorescein (6‐FAM) and the DNA size standard labeled with sulfoindocyanine succinimidyl ester (Cy‐5). CE equipped with both argon ion and diode lasers is a good alternative for sequencers and might be applied in analyses of PCR products generated by various fingerprinting methods.