Novel Design of Laser with SBS Phase Conjugation Mirror

The beam quality of a single-rod Nd: YAG laser with wavelength of 1.06 m was improved almost up to the diffraction limit by using a phase-conjugating mirror (PCM) based on stimulated Brillouin scattering (SBS) with acetone as the SBS medium. The new start cavity, which is the concave-convex cavity operating near the limit of stability in the g diagram, and the phase conjugation cavity of the SBS oscillator were designed. The thermal lens of the material with focal lengths of less than 140 m at pump powers of 60 J was compensated by the PCM. The laser is Q-switched by the nonlinear reflectivity of the PCM and the system works with an average repetition rate of about 5 kHz and single Q-switch pulse showed a width of 10 ns. It is demonstrated that if the start cavity is fit for SBS and the SBS phase conjugation mirror can be optimized, the beam quality of solid laser can be surely enhanced because of this technology of nonlinear optics.     

High Refractive-Index Microspheres as Optical Cavity Structure

Microspheres of refractive index of n_D > 2.0 have been investigated. The organic-inorganic hybrid microspheres of n_D = 1.72 were prepared by the vibrating orifice technique using titanium-tetra-n-butoxide (TTBu) and diphenyldimethoxysilane (DPhDMS). For lasing demonstration, Eu³⁺-doped microspheres were prepared using europium (III) thenoyltrifluoroacetonate [Eu(TTFA)₃] as the dopant. The particles have good spherical shape, smooth surface and high optical transparency. The diameters of the particles could be controlled to within 0.1 m. Subsequent heating of the microspheres at 550°C under oxygen atmosphere resulted in an increase in the refractive index up to n_D = 2.6 with retention of the spherical shape. Resonant emission was confirmed from Eu^{3 +}-doped microspheres after heating at 400–550°C, by pumping with the 514.5 nm line of a CW- Ar⁺laser.     

Stress State of an Elastic Space with a Toroidal‐Shaped Cavity

Solutions are obtained for the stress state problem for an elastic space with an internal toroidalshaped cavity that can be expanded in a trigonometric series in the angle in cylindrical coordinates. Displacements and stresses are specified on the boundary. An analytic solution of the problem is found using generalized analytic functions. Stresses and displacements of points in the elastic space are calculated.     

40J激光装置研制

 报道了一台输出能量在40J量级的激光装置。该装置从星光Ⅱ激光装置分光作为光源,由放大器链、能源系统和支撑桁架等三大部分构成。对整个激光装置的模拟计算结果表明：装置的增益能力足够输出40J,B积分满足ΔB小于1.8的要求。研制了一种全腔水冷新型放大器,对其小信号增益系数和增益均匀性进行了测量,实验得出增益系数β为0.034cm ^-1,增益均匀性为91.84%。结果表明这种放大器完全能满足此激光装置的设计要求。     

Finite-difference approach for the high-precision analysis of rotating-frame diffusion images

A finite-difference approach has been developed for precisely determining diffusion coefficient and T₁ relaxation time in fluid samples analyzed by magnetization-grating rotating-frame imaging (MAGROFI) with either a surface coil or a toroid cavity detector (TCD). This approach avoids shortcomings of phenomenologically based approximations, such as neglect of sample geometries with singularities at the confines of the sample volume, and accounts for the diffusive edge enhancement observed in fluid imaging. Error limits are discussed. The new method has been applied to the determination of the self-diffusion coefficient for MAGROFI experiments using TCDs filled with acetone.     

改善高功率激光二极管阵列光束质量的一种新方法

根据波导模理论，推导了高功率激光二极管阵列的远场分布，根据其分布特点，设计了一种离轴外腔.运用这种外腔，在工作电流为17A时，光束的束宽积从自由运转时的1100mm·mrad减小到128mm·mrad，二极管阵列的光束质量提高了8.5倍左右，输出功率约为自由运转时的75%.     

光纤光栅对FBG-ECL静态特性的影响

光纤光栅外腔半导体激光器(FBG-ECL)在未来光通信系统占有着越来越重要的地位。根据FBG-ECL的等效腔模型,讨论了光纤光栅反射率、带宽对FBG-ECL的输出功率,阈值特性、边模抑制比等静态特性的影响。指出了存在最佳光纤光栅峰值反射率,不仅使得FBG-ECL具有更高的输出功率,而且可以获得极好的边模抑制比。最后根据实测在不同反射率下外腔激光器的激射光谱,发现理论分析结果和实验数据是吻合的。     

一个传送原子纠缠态的新方案

本文提出一个通过原子和腔场相互作用传送未知原子纠缠态的新方案,并且成功概率为100%.在这个方案里,我们主要利用两个原子用来接受被传送的原子纠缠态以及一个双模腔作为量子通道.由于腔场的两个模具有不同的频率和正交极化,因此这两个模能够被区分,并且处于腔场的不同区域.原子和腔场通过J-C哈密顿量发生共振相互作用,当原子和其中一个模相互作用时,另外一个模不受影响.该方案既不需要贝尔态测量,也不需要任何操作重构纠缠初态.这个方案也可以推广到传送N个原子的纠缠态.     

聚心火焰在共振腔作用下引发爆轰的数值研究

 基于带化学反应的二维轴对称Euler方程，利用带有Superbee限制函数的波传播算法，对共振腔中的氢气-空气预混气的聚心燃烧进行了数值模拟，讨论了共振腔不同抛物面对起爆的影响。数值结果表明，在开始阶段，燃烧诱导的激波在轴心、火焰和固壁的反射，使火焰失稳，随后共振腔中的抛物壁面上产生一定频率和强度的反射激波，不断穿越火焰，使火焰进一步失稳，加剧了燃烧速度，最终导致爆轰的形成。同时，火焰在与激波的作用过程中，形状扭曲变形，呈封闭端小敞口端大的扁平头部蘑菇云。共振腔抛物面的不同形状引起激波聚焦位置的变化，会影响激波和火焰的相互作用，使起爆提前或推迟，甚至不起爆。