新型三段高性能的长波段掺铒光纤超荧光光源的研究

提出了一种第一段无泵浦、第二段前向泵浦和第三段后向泵浦的三段级联掺铒光纤超荧光光纤光源的新结构.数值分析了泵浦光波长、铒光纤长度以及泵浦比例对新结构性能的影响.结果表明可以找到一组适合制作成本低廉、输出功率高、谱平坦的长波段掺铒光纤超荧光光源.     

分析布拉格光栅破坏的两纤芯不同的光纤耦合器

进一步推广了描述纤芯不同光纤耦合器的耦合模理论，用于解释被布拉格光栅破坏的两纤芯不同光纤耦合器的耦合现象，理论分析的结果与已报道的实验结果相符，与单独的布拉格光栅所起的反射作用不同,这里布拉格光栅所起的作用主要是引入了强烈的色散，在光栅的频谱范围内使耦合器不再同步，在被布拉格光栅破坏的光纤耦合器的选择性频谱中，其边缘部分出现非常弱的波动，而在其阻带内出现非常强的凹陷。     

连续级联喇曼光纤激光器耦合波方程的修正

从最基本的耦合波方程出发，考虑光波正反向传输的情况下，推导出了一个全面的、准确的关于连续级联喇曼光纤激光器的理论模型，描述了各级Stokes光波功率沿光纤长度的变化.指出了相关一些文献中存在的不足，并且给出了多级斯托克斯光波相互作用的有效作用面积的表达式.此模型有助于喇曼光纤激光器的设计.     

PPLT倍频宽线宽掺镱双包层光纤放大激光

分别通过理论和实验研究了周期性极化的钽酸锂（PPLT）倍频宽线宽准连续掺镱双包层光纤放大激光.PPLT样品长为40 mm，极化周期为7.67 μm.基频光的中心波长为1064 nm，线宽约为6 nm.从基频光的光谱特性出发，利用超晶格倍频理论，解释了实验中获得的倍频温度与二次谐波功率之间的关系.在基频光的功率为2.2 W时，获得的宽线宽光纤激光倍频效率为1.8%.     

Widely tunable long-period fiber grating with nm-thick higher refractive index film overlay

By introducing a four-layer step-index waveguide modeling, the characteristics of long-period fiber grating (LPFG) with an nm-thick film overlay, which has higher refractive index than that of fiber cladding are investigated in detail. The influence of both the overlay thickness and refractive index on the tuning ability of LPFG is analyzed. The numerical results demonstrate that spectral response of LPFG is divided into three distinct regions as the overlay deposition increases and the shift of resonant wavelength is drastic in some special thickness range. In conjunction with higher-order cladding mode coupling and fiber cladding etching, the sensitivity of LPFG to the overlay refractive index is enhanced significantly and over 120 nm resonant wavelength tunable range is achieved.     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

应用LiNbO_3声表面波驱动的全光纤声光频移器

介绍一种工作在10.7MHz的全光纤声光频移器.它由在LiNbO_3基片上制作的叉指电极换能器产生的声表面波驱动.当驱动电功率1.5W时,频移光转换效率达35％.     

Acousto-optic mode coupling of partially coherent light in two-mode optical fibers

An acoustic pulse propagating on a two-mode fiber can act as a beam splitter in a scanning interferometer. When this device is employed in white-light interferometry, the effects of distributed coupling and dispersive interferometer arms need to be considered. A theory suitable for treating acousto-optic interaction of partially coherent light in a moving interaction region was developed. It was found that differential optical dispersion should be negligible and the acoustic pulse length short. Also the coherence time should be short but long compared to the intermodal group delay difference over a pulse length. Experiments with long acoustic pulses were performed, and fairly good agreement with theory was obtained.     

时分复用倍乘光脉冲重复率的新型光纤耦合器环状连接法分析

提出并详细分析了一种基于时分复用技术倍乘光脉冲重复率的方法：在２×２光纤耦合器的一个输入口与一个输出口间，接入时延为脉冲列半周期奇数倍的一段光纤使之形成环状连接循环耦合，而在另一输出口获得光脉冲。详细分析了该系统中光纤耦合器耦合比、插入损耗、时延光纤长度的要求，偏差的影响及其调节法，给出了理论公式、结果的计算机模拟与实验介绍；与经典的马赫陈德尔干涉仪接法及近年提出的Ｓａｇｎａｃ环接法进行了比较。该方法特别适用于对窄脉冲列进行串接复用实现重复率的多次倍乘，从而得到数千兆赫至上百千兆赫的高重复率光脉冲     

Optical current transducers using flint glass fiber as the faraday sensor element

This paper describes development of the optical current transducers using flint glass fiber as the Faraday effect sensing element. Excellent polarization properties of the fiber with low birefringence are described, and the design and test data of a current transducer using the fiber manufactured for use in electric power facilities are reviewed. Experimental results on flexible characteristics of a scheme with round trip light transmission in the fiber is also reported.