Fluorocarbon polymerizable surfactants: viscometric behavior, micellar polymerization and interactions with associating polymers

 The micellar aggregation of two fluorocarbon surfactants bearing a polymerizable acrylamido group and differing only in the degree of amido substitution (CONH or CONC₂H₅) has been investigated by viscometry. The two surfactants exhibit distinct solution properties with a micellar growth occurring at a much lower concentration for the N-monosubstituted sample which shows in addition a shear thickening and rheopectic behavior. The ability of the latter surfactant to form hydrogen bonding is responsible for this difference in behavior. Micellar copolymerization of acrylamide with these surfactants or with a hydrocarbon analogue gives copolymers with a polysoap-like behavior. The copolymers in aqueous solution show a pronounced intramolecular hydrophobic aggregation expressed by relatively low-viscosity values when compared with those of other hydrophobically modified water-soluble polymers reported in the literature. Surfactant–polymer mixed systems do not show a strong incompatibility between fluorocarbon and hydrocarbon moieties. Received: 24 March 1998 Accepted: 30 June 1998     

Synthesis of a thermoresponsive shell‐crosslinked 3‐layer onion‐like polymer particle with a hyperbranched polyglycerol core

A novel thermoresponsive shell crosslinked three‐layer onion‐like polymer particles were prepared using hyperbranched polyglycerol (PG) as parents compound, the periphery hydroxyl groups of PG were transformed into trithiocarbonates (? SC(S)S? ) first; then, it was used as chain transfer agent to prepare star‐like block copolymer of N‐isopropyl acrylamide (NIPA) and N,N‐dimethylaminoethyl acrylate (DMA) in sequence via reversible addition fragmentation chain transfer (RAFT) process. Thus, a three‐layer polymer, PG? [SC(S)S? (DMA)? b? (NIPA)]_n, was obtained. The middle layer of poly(DMA) was then crosslinked with 1,8‐diiodoctane, and the resulting onion‐like three‐layer polymer showed a lower critical solution temperature (LCST) in water because of the outer layer of poly(NIPA). The LCST value only slightly depended on the crosslinking degree. Finally, the ? SC(S)S? were transformed into thiols by sequential treating with sodium borohydride and formic acid; thus, the core molecule was chemically detached from the crosslinked shell and a novel shell crosslinked polymer particle was obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5652–5660, 2005     

Effect of reaction conditions on the homo and copolymerizations of N-(1-naphthyl)acrylamide

In this work, we studied the influence of time reaction and initiator amount on N-(1-naphthyl)acrylamide (NAM) polymerization, in dioxane and DMF. The same was done with three copolymers with methyl methacrylate (MMA). We found that NAM could be incorporated in high proportions in the copolymer. We also found that, with the same reaction time, the amount of benzoyl peroxide (BPO) has little or no effect on the polymerization degree; however reaction rates and yields were affected in DMF. All homopolymers showed a low dispersion (?), even when they were polymerized in solution. All DPNAMs can be classified as monodisperse.     

Homogeneous hydrogels made with acrylic acid,acrylamide and chemically functionalized carbon nanotubes

Carbon nanotubes (CNTs) chemically functionalized were used to synthesize a series of novel nanocomposite hydrogels by in situ polymerization with acrylic acid (AA) and acrylamide (AM). A novel strategy was developed to prepare these hydrogels. CNTs were functionalized following a three-step chemical procedure: (i) purified carbon nanotubes (CNTs_p) were partially surface oxidized to obtain CNTs with hydroxyl, carbonyl and carboxyl groups on their sidewalls (CNTs_oxi), (ii) CNTs_oxi were reacted with oxalyl chloride to obtain CNTs functionalized with acyl chloride groups (CNTs_OCl), and (iii) CNTs_OCl were reacted with acrylic acid (AA). The product, AA modified CNTs_OCl (CNTs_OCl-AA) was used to prepare the (CNTs_OCl-AA-AM) nanocomposite hydrogels, where anhydride groups were tethered to the surface of the CNTs_OCl-AA. The swelling process in water was evaluated as a consequence of the anhydride group hydrolysis, which broke some chemical links between CNTs_OCl-AA and crosslinked AA-AM network. Equilibrium-swelling values of all hydrogels increased as the content of AA increased and were larger for AA-AM hydrogels than for CNTs_OCl-AA-AM nanocomposite hydrogels. Young’s moduli of CNTs_OCl-AA-AM nanocomposite hydrogels prepared with 1 or 2?wt.% AA, reached larger values than those measured for AA-AM hydrogels. This tendency was reversed when the AA content was raised to 3?wt.%.     

Lower critical solution temperature sensitivity to structural changes in poly(N‐isopropyl acrylamide) homopolymers

The effect of the molecular weight on the lower critical solution temperature (LCST) has been discussed extensively, where LCST increased with molar mass, decreased or kept constant, which leads to confusion. This work is focused on the preparation of poly(N‐isopropyl acrylamide) homopolymers, obtained in a wide molecular weights range. The LCST behavior is analyzed by calorimetry and rheology, and a deep study of molecular features is carried out for a better knowledge of the influence of various parameters involved on LCST. Finally, the molecular weight trend is observed, and its influence on LCST is compared with the effect of other parameters as polymer concentration in water, end‐group effect, and tacticity. It is observed that other parameters such tacticity and end‐group effect will affect the LCST behavior over molecular weight, if this one is not high enough. Furthermore, the study of the LCST ranges will be a useful tool for analyzing the molecular weight trends. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1386–1393     

Preparation of interpenetrating polymer network composed of poly(ethylene glycol) and poly(acrylamide) hydrogels as a support of enzyme immobilization

Poly(ethylene glycol)(PEG)‐based interpenetrating polymeric network (IPN) hydrogels were prepared for the application of enzyme immobilization. Poly(acrylamide)(PAAm) was chosen as the other network of IPN hydrogel and different concentration of PAAm networks were incorporated inside the PEG hydrogel to improve the mechanical strength and provide functional groups that covalently bind the enzyme. Formation of IPN hydrogels was confirmed by observing the weight per cent gain of hydrogel after incorporation of PAAm network and by attenuated total reflectance/Fourier transform infrared (ATR/FTIR) analysis. Synthesis of IPN hydrogels with higher PAAm content produced more crosslinked hydrogels with lower water content (WC), smaller M_c and mesh size, which resulted in enhanced mechanical properties compared to the PEG hydrogel. The IPN hydrogels exhibited tensile strength between 0.2 and 1.2 MPa while retaining high levels of hydration (70–81% water). For enzyme immobilization, glucose oxidase (GOX) was immobilized to PEG and IPN hydrogel beads. Enzyme activity studies revealed that although all the hydrogels initially had similar enzymatic activity, enzyme‐immobilizing PEG hydrogels lost most of the enzymatic activity within 2 days due to enzyme leaching while IPN hydrogels maintained a maximum 80% of the initial enzymatic activity over a week due to the covalent linkage between the enzyme and amine groups of PAAm. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] thermoresponsive microspheres: An accurate method based on solute exclusion technique to determine the volume phase transition temperature

Poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethylmethacrylate))] [poly(NIPAAm-co-AAm-co-HEMA)] copolymer was synthesized as a new thermoresponsive material possessing a lower critical solution temperature (LCST) around 37 °C in phosphate buffer, pH 7.4, at a solution concentration of 1%, w/v. The influence of polymer concentration on LCST was determined by cloud point measurements and by microcalorimetric analysis. The copolymer was transformed in hydrogel microspheres by suspension reticulation of OH groups with glutaraldehyde. The volume phase transition temperature (VPTT) of microspheres was determined by a new approach, which involves measurement of the increase in concentration of a blue dextran (BD) solution at different temperatures in the presence of dry microspheres. The minimum BD concentration that gives reliable and reproducible results was determined to be 1 mg/ml. However, the higher is the concentration of BD in solution the smaller is the error. Contrary to solution of the linear polymer which displays a sharp phase transition temperature, the dependence of water regain of the hydrogel with temperature lasts from 4 °C to 50 °C.     

在阴离子交换树脂催化剂上合成二丙酮醇的动力学研究

动力学研究表明,在碱性树脂催化剂上丙酮缩合制二丙酮醇是一个1-1级可逆反应,本文对此多相催化的反应机理进行了探讨。     

Bioconversion of acrylonitruke to acrylamide using a thermostable nitrile hydratase

Although providing an attractive route for production of crrylamide from acrylonitrile, utilization of nitrile hydratase en zymes has been limited by the requirement for low temperatu rebioconversion conditions. Thisrreportsummarizes a search for thermostable nitrile hydratases from aerobic moderate thermophiles screened for ability to grow on acrylonitrileatt concentrations to 1% at elevated temperatures. A new isolate Bacillus sp. BR449 constitutively expresses a thermostble nitrile hydratase with properties iccluding low substrate inhibition and broad temperature range with optimal activity at 55°C. With prolonged exposure, BR449 nitrile hydratase exhibited temperature-dependent inactivation by acrylonitrile, which is attributed to alkylation of nucleophilic sites on the enzymes/     

梳形抗盐聚合物在聚合物驱油中的应用

三次采油技术已成为我国提高原油采收率的主要措施之一。研制新型高效驱油用聚合物是降低成本,提高采油量的关键。目前国内外研制的新型高效驱油用聚合物主要为两性聚合物、耐温耐盐单体共聚物、疏水缔合聚合物、复合(或多元组合)型聚合物、共混聚合物和梳形聚合物等。