Vehicle density and velocity estimation on highways for on-ramp metering control

A scheme for vehicle density and velocity estimation in a stretch of highway based on a modified cell transmission model [C. F. Daganzo, Transportation Research, Part B, 28B(4),269–287, 1994. Elsevier is presented. The scheme is intended for use with on-ramp metering control algorithms, providing local knowledge of densities and velocities that is helpful to improve on-ramp metering control performance. Estimation of density is obtained by nonlinear estimators, while velocity estimation is obtained by gradient algorithms. There is one density–velocity estimator for free traffic flow and other for congested traffic flow. Both estimator schemes work in parallel. The final estimation of density and velocity results from a convex combination of the predictions of the two estimators. This combination depends on occupancy or density measurements at the boundaries of the stretch and is produced by a fuzzy inference system. Stability and convergence of the density and velocity estimation scheme is proved by Lyapunov based techniques. Simulation results comparing measured and estimated traffic data are presented. They confirm good performance of the estimators. Research sponsored by grants UNAM PAPIIT IN110403 and CONACYT 47583.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Stability of solutions to the Cauchy problem for a plane hyperbolic system with time-periodic coefficients

Considering a plane hyperbolic system with time-periodic coefficients, we construct a version of the direct Lyapunov method with the condition on the derivative of the Lyapunov functional along the trajectories of the system which is weakened by use of periodicity of the coefficients. We exhibit an illustrative example.     

Density functional theory study on antiferromagnetic interactions in a silver (I) complex of nitronyl nitroxide

A one-dimensional (1D) silver (I) complex of nitronyl nitroxide with fairly strong antiferromagnetic interaction, in which the metal ions are diamagnetic, is investigated by means of the ab initio crystal orbital method based on the density functional theory. The calculated values of the magnetic coupling constant (J) are close to the experimental measured J value in the periodic system. The magneto-structural correlation reveals that the existence of an antiferromagnetic coupling pathway along nitronyl nitroxide units via silver (I) ion in this system. The spin population distribution also shows the existence of spin delocalization along the ONCNO–Ag–ONCNO, which affords a rational interpretation for the antiferromagnetic interaction mechanism.     

Deformations of functionals and bifurcations of extremals

We study homology characteristics of critical values and extremals of Lipschitz functionals defined on bounded closed convex subsets of a reflexive space that are invariant under deformations. Sufficient conditions for the existence of a bifurcation point of a multivalued potential operator (the switch principle for the typical number of an extremal) are established.     

200MW非再热双抽供热机组变工况计算及工况图的绘制

工况图在热电厂的设计和运行中具有广泛的用途。本文根据引进型双抽非再热200MW供热机组的技术特点，通过编程在纯凝汽工况、单抽工业抽汽工况、单抽采暖抽汽工况和双抽供热等典型变工况计算的基础上，完成了当新蒸汽负荷、工业抽汽负荷和采暖抽汽负荷发生改变时的变工况计算，并绘制了该机组的运行工况图．     

Systematic formulations for electronegativity and hardness and their atomic scales within density functional softness theory

A unified Mulliken valence with Parr ground‐state electronegativity picture is presented. It provides a useful analytical tool on which the absolute hardness as well ionization potential and electron affinity functionals are based. For all these chemical reactivity indices, systematic approximate density functionals are formulated within density functional softness theory and are applied to atomic systems. For the absolute hardness, a special relationship with the new electronegativity ansatz and a particular atomic trend paralleling the absolute electron affinity are established that should complement and augment the earlier finite‐difference energetic approach. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Electronic structure and vibrational spectra of cis-diammine(orotato)platinum(II), a potential cisplatin analogue: DFT and experimental study

Orotic acid (vitamin B₁₃) is a key intermediate in biosynthesis of the pyrimidine nucleotides in living organisms, moreover, it may serve as the biological carrier for some metal ions. cis-Diammine(orotato)platinum(II), cis-[Pt(C₅H₂N₂O₄)(NH₃)₂] can be considered as a new potential cisplatin analogue. The FT-Raman and FT-IR spectra of the title complex are reported, for the first time. The molecular structure, vibrational frequencies, and the theoretical infrared and Raman intensities have been calculated by the density functional mPW1PW91 method. The detailed vibrational assignment has been made on the basis of the calculated potential energy distribution. The theoretically predicted IR and Raman spectra show very good agreement with experiment. Natural bond orbital (NBO) analyses were performed for cisplatin, carboplatin and the title complex. The results provided new data on the nature of platinum–ligand bonding in these compounds. Strong intramolecular hydrogen bond between the orotate ligand and the coordinated ammonia group stabilizes the structure of the platinum(II) complex. Thus, it is suggested that the orotate ligand in the title complex is more inert to the substitution reactions than the chloride ligands in cisplatin.     

小分子硫原子团簇正离子的结构稳定性

用分子图形软件设计出 4 9种硫原子团簇Sn+ (n =3～ 13)的结构 ,使用B3LYP密度泛函进行几何构型优化和振动频率计算 ,根据分子的总能量得出最稳定的同分异构体 .在硫原子团簇正离子中 ,大部分原子为二配位成键 .带有一、三配位的原子结构的总能量较高 .部分最稳定硫原子团簇正离子的构型与最稳定的中性硫原子团簇的构型完全不同 .     

Surface rumpling of cubic CaTiO3 from density functional theory

In this paper, the structure of cubic CaTiO3 （001） surfaces with CaO and TiO2 terminations has been studied from density functional calculations. It has been found that the Ca atom has the largest relaxation for both kinds of terminations, and the rumpling of the CaO-terminated surface is much larger than that of TiO2-terminated surface. Also we have found that the metal atom relaxes much more prominently than the O atom does in each layer. The CaO-terminated surface is slightly more energetically favourahle than the TiO2-terminated surface from the analysis of the calculated surface energy.