Synchrotron-radiated X-ray and neutron diffraction study of native cellulose

Precise determination of d-spacings and compositional ratio of cellulose I_α and I_β in various native cellulose samples was successfully carried out by synchrotron-radiated X-ray diffraction and time-of-flight (TOF) neutron diffraction from quasi-powder specimens. X-ray diffraction peaks were separated by the deconvolution method using six types of profile function: Gaussian, Lorentzian, intermediate Lorentzian, modified Lorentzian, pseudo-Voigt, and Pearson VII. In terms of R-factors, the pseudo-Voigt function gave the best fit with the observation, and was used for determination of d-spacings. The numerical results for Valonia cellulose were: dI_α (1 0 0) = 0.613 nm; dI_β (1 1 0) = 0.603 nm; dI_β (1 1 0) = 0.535 nm; dI_α (0 1 0) = 0.529 nm; I_α content = 0.65. The differences determined between dI_α (1 0 0) and dI_β (1 1 0) and between dI_β (1 1 0) and dI_α (0 1 0) were similar to those previously reported. Comparison between unresolved peaks for the two types of cellulose samples revealed a small but definite difference between dI_α (1 1 0) and dI_β (2 0 0). The TOF neutron diffractometry using deuterated samples confirmed this difference. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis, Crystal and Magnetic Structures of the Sodium Ferrate (IV) Na4FeO4 Studied by Neutron Diffraction and Mössbauer Techniques

The alkali sodium ferrate (IV) Na₄FeO₄ has been prepared by solid-state reaction of sodium peroxide Na₂O₂ and wustite Fe_1−xO, in a molar ratio Na/Fe=4, at 400°C under vacuum. Powder X-ray and neutron diffraction studies indicate that Na₄FeO₄ crystallizes in the triclinic system P−1 with the cell parameters= a=8.4810(2) Å, b=5.7688(1) Å, c=6.5622(1) Å, α=124.662(2)°, β=98.848(2)°, γ=101.761(2)° and Z=2. Na₄FeO₄ is isotypic with the other known phases Na₄MO₄ (M=Ti, Cr, Mn, Co and Ge, Sn, Pb). The solid solution Na₄Fe_xCo_1−xO₄ exists for x=0-1 and we have followed the evolution of the cell parameters with x to determine the lattice parameters of the triclinic cell of Na₄FeO₄. A three-dimensional network of isolated FeO₄ tetrahedra connected by Na atoms characterizes the structure. This compound is antiferromagnetic below T_N=16 K. At 2 K the magnetic cell is twice the nuclear cell and the magnetic structure is collinear (μ_Fe=3.36(12) μ_B at 2 K). This black compound is highly hygroscopic. In water or on contact with the atmospheric moisture it is disproportionated in Fe³⁺ and Fe⁶⁺. The Mössbauer spectra of Na₄FeO₄ are fitted with one doublet (δ=− 0.22 mm/s, Δ=0.41 mm/s at 295 K) in the paramagnetic state and with a sextet at 8K. These parameters characterize Fe⁴⁺ high-spin in tetrahedral FeO₄ coordination.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

A Structural Investigation of La2(GeO4)O and Alkaline-Earth-Doped La9.33(GeO4)6O2

The structures of the oxyorthogermanate La₂(GeO₄)O and the apatite-structured La_9.33(GeO₄)₆O₂ have been refined from powder neutron diffraction data. La₂(GeO₄)O crystallizes in a monoclinic unit cell (P2₁/c) and is cation stoichiometric in contrast to previous reports. La_9.33(GeO₄)₆O₂ crystallizes in a hexagonal unit cell (P6₃/m) and the powder diffraction data show anisotropic peak broadening that is observed in electron diffraction patterns as incommensurate diffuse spots at hkq reciprocal planes (with q=1.6-1.7) and can be attributed to a correlated disorder in the “apatite channels”. This compound was doped up to a nominal composition close to M₂La₈(GeO₄)₆O₂ with M=Ca, Sr, Ba. The dopant ions preferentially occupy the 4f sites as the number of La vacancies decreases. The measured ionic conductivity of La_9.33(GeO₄)₆O₂ is about 3 orders of magnitude larger than for La₂(GeO₄)O at high temperatures and decreases with increasing dopant content from the highest value of about 0.16 S cm⁻¹ at 1160 K.     

Small-angle neutron scattering study on microstructure of poly(N-isopropylacrylamide)-block-poly(ethylene glycol) in water

By employing small-angle neutron scattering (SANS), we investigated the microstructures of, poly(N-isopropylacrylamide) (PNIPA)-block-poly(ethylene glycol) (PEG) (NE) in deuterated water D₂O, as related to macroscopic behaviors of fluidity, turbidity and synerisis. SANS revealed following results: (i) microphase separation occurs at around above 17 °C in a temperature range of transparent sol below 30 °C. In the microdomain appeared in the transparent sol state, both block chains of PNIPA and PEG are swollen by water; (ii) for the NE solution of polymer concentration W_p > 3.5% (w/v), corresponding to opaque gel above 30 °C, a percolated structure, i.e., network-like domain is formed by NE as a result of macrophase separation due to dehydration of the PNIPA chains. As the temperature increases toward 40 °C, the network domain is squeezed along a direction parallel to the NE interface, which leads to increase of the interfacial thickness given by swollen PEG chains and to the macroscopic synerisis behavior.     

Synthesis, Electrical Properties, and Powder Neutron Crystal Structure Refinement of Pb1−xBixPt2O4 Compounds (0≤x≤0.3)

Substitution of Pb for Bi in the recently characterized mixed-valence lead-platinum oxide PbPt₂O₄ was attempted and a Pb_1−xBi_xPt₂O₄ solid solution was obtained for 0≤x≤0.3. Powder X-ray diffraction study showed that all substituted compounds crystallize with similar triclinic unit cell and PbPt₂O₄ lattice parameters. The structural model of Pb_0.7Bi_0.3Pt₂O₄ was refined from powder X-ray diffraction data using the Rietveld method and the results indicate the same crystal structure than PbPt₂O₄ with one mixed Pb/Bi atomic site. Neutron diffraction realized on the two limit compositions of the solid solution (x=0 and 0.3) allowed to confirm the PbPt₂O₄ and Pb_0.7Bi_0.3Pt₂O₄ stoichiometries. Mean oxidation degree of Pt atoms in the [PtO₄] infinite chains decreases from +3 for PbPt₂O₄ to +2.7 for Pb_0.7Bi_0.3Pt₂O₄. Conductivity measurements show a metallic behavior for all the compositions except the limit composition x=0.3 for which a semiconducting behavior appears.     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Characteristic lengths and the structure of salt free polyelectrolyte solutions. A small angle neutron scattering study

We have studied salt free semi dilute polyelectrolyte solutions by small angle neutron scattering. Specific labelling associated with an extrapolation method has allowed the separation of the form factor of a single polyelectrolyte chainS ₁(q) and the structure factorS ₂(q). Two lengths are deduced from these two factors: the persistence lengthb _t which characterizes the electrostatic interactions along the chain by a fitting ofS ₁(q) with calculation of the scattering function for a wormlike chain, and fromS ₂(q),q _m ^–1 which characterizes the interactions between chains. These two lengths vary in the same way with the concentration of polyions (b _t C _p ^–1/2 ,q _m ^–1 C _p ^–1/2 ) and a constant relation exists between them: only one length is then necessary to describe the structure of polyelectrolyte soltuion on this semidilute concentration range.Laboratoire Commun CEA-CNRS.     

THERMAL NEUTRON ACTIVATION ANALYSIS—AN IMPORTANT ANALYTICAL TOOL

ABSTRACT

This review is intended to present an introduction to the use of thermal neutron activation analysis (TNAA) as an analytical technique for the determination of elements in almost all kinds of matrices. This method of analysis is generally multi-element and experimental conditions can be designed to be nondestructive to the sample. This review will focus on thermal neutron activation as this technique allows determination of approximately two-thirds of the elements on the periodic chart. There are also more and wider spread facilities in the United States that offer these services. The available facilities are located across the United States and are generally accessible to everyone. The review will also detail the advantages and disadvantages of TNAA compared to other common spectroscopic methods. An outline of the general procedure for performing the analysis of the elements using activation analysis is presented to emphasize the ease of using this technique. The outline is divided into sections that give the general procedure, how to choose the correct nuclear reaction and reaction product, and the main sources of errors that can affect the results of the study. These sources of error are subdivided into general types of errors. The general types of errors are divided into those related to pre-chemistry, problems associated with the irradiation of the samples, errors associated with the use of nuclear constants (cross sections, half-lives, transition probabilities, etc.), the choice of the correct reaction and reaction product, and those associated with the counting of the irradiated samples. The general theory of activation analysis is presented and summarizes the derivation of the equations used and the development of the comparator method of analysis. The comparator method is used to simplify the method by irradiating samples along with standards. This reduces the need for using the nuclear constants and thus reducing errors. The use of radiochemical separations to isolate analytes of choice from the radioactive matrix is also described. Some current literature is also included to give a feel for current applications of the use of thermal neutron activation analyses. The summary also describes some of the different matrices that have been used for analyses.     

Singlet Oxygen Photo‐Oxygenation in Water/Pluronic F‐127 Hydrogels: Increased Reaction Efficiency Coupled with a Switch in Regioselectivity

Pluronic F‐127 hydrogels are highly efficient microenvironments for photochemical reactions, as demonstrated for singlet oxygen reactions of monoalkenes. Nonpolar substrates are localized in the nanosized polymer compartment, which can be visualized by neutron scattering. The efficiency of ¹O₂ reactions is strongly increased for tiglate derivatives and the regioselectivity of the ene reaction of trisubstituted alkenes is completely switched in comparison with solution phase and inverted in comparison with intrazeolite photo‐oxygenations.