Alkaloids Analysis of Habranthus cardenasianus (Amaryllidaceae), Anti-Cholinesterase Activity and Biomass Production by Propagation Strategies

Plants in the Amaryllidaceae family synthesize a diversity of bioactive alkaloids. Some of these plant species are not abundant and have a low natural multiplication rate. The aims of this work were the alkaloids analysis of a Habranthus cardenasianus bulbs extract, the evaluation of its inhibitory activity against cholinesterases, and to test several propagation strategies for biomass production. Eleven compounds were characterized by GC-MS in the alkaloid extract, which showed a relatively high proportion of tazettine. The known alkaloids tazettine, haemanthamine, and the epimer mixture haemanthidine/6-epi-haemanthidine were isolated and identified by spectroscopic methods. Inhibitory cholinesterases activity was not detected. Three forms of propagation were performed: bulb propagation from seed, cut-induced bulb division, and micropropagated bulbs. Finally, different imbibition and post-collection times were evaluated in seed germination assays. The best propagation method was cut-induced bulb division with longitudinal cuts into quarters (T1) while the best conditions for seed germination were 0-day of post-collection and two days of imbibition. The alkaloids analyses of the H. cardenasianus bulbs showed that they are a source of anti-tumoral alkaloids, especially pretazettine (tazettine) and T1 is a sustainable strategy for its propagation and domestication to produce bioactive alkaloids.     

Wave propagation in viscoelastic single-walled carbon nanotubes with surface effect under magnetic field based on nonlocal strain gradient theory

The governing equation of wave motion of viscoelastic SWCNTs (single-walled carbon nanotubes) with surface effect under magnetic field is formulated on the basis of the nonlocal strain gradient theory. Based on the formulated equation of wave motion, the closed-form dispersion relation between the wave frequency (or phase velocity) and the wave number is derived. It is found that the size-dependent effects on the phase velocity may be ignored at low wave numbers, however, is significant at high wave numbers. Phase velocity can increase by decreasing damping or increasing the intensity of magnetic field. The damping ratio considering surface effect is larger than that without considering surface effect. Damping ratio can increase by increasing damping, increasing wave number, or decreasing the intensity of magnetic field.     

Femtosecond laser pulse train effect on Doppler profile of cesium resonance lines

We present direct observation of the velocity-selective optical pumping of the Cs ground state hyperfine levels induced by the femtosecond (fs) laser oscillator centered at either D2 (6 ²S_1/2↦6 ²P_3/2, 852 nm) or D1 (6 P_1/2, 894 nm) cesium line. We utilized previously developed modified direct frequency comb spectroscopy (DFCS) which uses a fixed frequency comb for the excitation and a weak cw scanning probe laser centered at the ¹³³Cs 6 ²S_1/2↦6 ²P_3/2 transition (D2 line) for ground levels population monitoring. The frequency comb excitation changes the usual Doppler absorption profile into a specific periodic, comblike structure. The mechanism of the velocity selective population transfer between the Cs ground state hyperfine levels induced by fs pulse train excitation is verified in a theoretical treatment of the multilevel atomic system subjected to a pulse train resonant field interaction.     

Recent Progress in the Simulation of Chiral Systems with Real Time Propagation Methods

In this brief review, an overview about recent efforts to simulate the spectroscopic signatures of chiral molecules is given with focus on real time propagation approaches to solve the time-dependent Schrödinger equation. In particular the simulation of electric circular dichroism spectra and vibrational Raman optical activity is discussed. In comparison to linear absorption spectra, where only the response of the electric dipole moment is necessary, the response of the magnetic dipole moment and electric quadrupole moment is more intricate. Issues such as gauge origin dependence, basis set dependence, non-local potentials and the dipole approximation are addressed.     

A finite element method based comparative fracture assessment of carbon black and silica filled elastomers: Reinforcing efficacy of carbonaceous fillers in flexible composites

This study is focused on numerical investigation on fracture behaviors of carbon black (CB) and silica filled elastomeric composites. Finite element analysis (FEA) in compliance with multi-specimen method is used to calculate J-integral and geometry factor of the rubber composites up to a displacement of 20 mm for single edge notch in tension (SENT) and double edge notch in tension (DENT) specimens. An empirical relationship between crack tip opening displacement (CTOD) and crack advancement is established depending on notch to width ratio (NWR). The stress contours across the notches for SENT and DENT specimens is discussed briefly. It is found that fracture propagation resistance of CB filled elastomer is 125% more than that of silica filled elastomer. Although, Silica filled elastomer have good tensile strength and crosslink density but it fails to replace carbon black in terms of fracture properties. The critical J-integral for CB filled elastomer is 18.7% and 32.2% more than silica filled elastomer for SENT and DENT specimens respectively. The effect of specimen type on various fracture properties is also explored. The factor of safety is found to be significantly more in case of CB filled elastomers making them less vulnerable to crack propagation and catastrophic failure.     

A study of the effect of step excrescences and free‐stream disturbances on boundary layer stability

In this work, a study of the mechanism by which free‐stream acoustic and vorticity disturbances interact with a boundary layer flow developing over a flat plate featuring a step excrescence located at a certain distance from a blunt leading edge is included. The numerical tool is a high‐fidelity implicit numerical algorithm solving for the unsteady, compressible form of the Navier–Stokes equations in a body‐fitted curvilinear coordinates and employing high‐accurate compact differencing schemes with Pade‐type filters. Acoustic and vorticity waves are generated using a source term in the momentum and energy equations, as opposed to using inflow boundary conditions, to avoid spurious waves that may propagate from boundaries. The results show that the receptivity to surface step excrescences is largely the result of an overall adverse pressure gradient posed by the step, and that the free‐stream disturbances accelerate the generation of instabilities in the downstream. As expected, it is found that the acoustic disturbance interacting with the surface imperfection is more efficient in exciting the Tollmien–Schlichting waves than the vorticity disturbance. The latter generates Tollmien–Schlichting waves that are grouped in wave packets consistent with the wavelength of the free‐stream disturbance. Copyright © 2015 John Wiley & Sons, Ltd.     

Wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes with surface and nonlocal effects

In this paper, the transverse wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes is investigated based on nonlocal elasticity theory with consideration of surface effect. The governing equation is formulated utilizing nonlocal Euler-Bernoulli beam theory and Kelvin-Voigt model. Explicit wave dispersion relation is developed and wave phase velocities and frequencies are obtained. The effect of the fluid flow velocity, structural damping, surface effect, small scale effects and tube diameter on the wave propagation properties are discussed with different wave numbers. The wave frequency increases with the increase of fluid flow velocity, but decreases with the increases of tube diameter and wave number. The effect of surface elasticity and residual surface tension is more significant for small wave number and tube diameter. For larger values of wave number and nonlocal parameters, the real part of frequency ratio raises.     

Propagation characteristics of tilted partially coherent rectangular flat-topped beam in turbulent atmosphere

In this paper, the effects of atmospheric turbulence on the intensity distribution of a tilted Rectangular Partially Coherent Flat-Topped (RPCFT) beam were studied. An analytical formula for the intensity distribution was derived. POWER In Bucket (PIB) value is calculated numerically. The effects of source parameters – such as correlation length, order of flatness and tilt coefficient – on the intensity were analyzed. Detailed analysis demonstrates that these parameters have an influence on beam propagation properties. The analyses are illustrated by numerical examples and graphs.     

The influence of surface geometry and topography on the fatigue cracking behaviour of laser hybrid welded eccentric fillet joints

Laser hybrid welding of an eccentric fillet joint causes a complex geometry for fatigue load by 4-point bending. The weld surface geometry and topography were measured and studied in order to understand the crack initiation mechanisms. The crack initiation location and the crack propagation path were studied and compared to Finite Element stress analysis, taking into account the surface macro- and micro-geometry. It can be explained why the root and the upper weld toe are uncritical for cracking. The cracks that initiate from the weld bead show higher fatigue strength than the samples failing at the lower weld toe, as can be explained by a critical radius for the toe below which surface ripples instead determine the main stress raiser location for cracking. The location of maximum surface stress is related to a combination of throat depth, toe radius and sharp surface ripples along which the cracks preferably propagate.