一种新的三维计算全息图的计算方法

介绍了一种制作真实三维物体计算全息图的新方法。用摄像机记录三维物体在非相干光照明条件下两个正交方向上不同视角的一系列投影像，将这些投影像导入计算机，在MATLAB中对其作快速傅里叶变换。对这一系列二维投影像的傅里叶变换图进行抽样，得到三维物体在透镜后焦平面上的光场分布，进而制成一张计算全息图。结果证明该方法可以实现对真实物体三维全息图的合成，并且在算法实现上更加简单，提高了程序的运行速度，有利于改善全息图再现像的质量。为解决真实物体相干全息记录中光源功率和相干长度对全息记录可行性的限制指出了一个新的方向。     

Interferometric key readable security holograms with secrete-codes

A new method is described to create secrete-codes in the security holograms for enhancing their anti-counterfeiting characteristics. To imitate these codes is difficult as pure phase objects having complex phase distribution function are used to modulate the object beam that is recorded in conjunction with an encoded interferometric reference beam derived from a key hologram. Lloyd’s folding mirror interferometer is used to convert phase variations of the reconstructed wave-front into an intensity pattern for hologram authenticity verification. Creating the secrete-codes through an interferometric reference beam from the key hologram facilitates a multi-stage authenticity verification as well as easy repositioning of the security hologram through a specific Moiré pattern generated during the verification process.      

Combined implementing the hole-drilling method and reflection hologram interferometry for residual stresses determination in cylindrical shells and tubes

Main features inherent in simplified approach to residual stresses determination in cylindrical shells and tubes, external diameter of which is not less than 60 mm, by combing the hole-drilling method and reflection hologram interferometry are discussed in detail. Initial experimental information in a form of hole diameter increments in principal stress directions is derived from high-quality reflection holograms recorded near cylindrical objects of intermediate curvature value. Converting measured parameters into required stress values is based on the transition model that corresponds to plane stress conditions of pure membrane type. The technique developed is capable of determining residual stress component values within 5% accuracy in an absence of stress gradients over the probe hole diameter when a type of residual stress field corresponds to the transition model adopted. The accuracy analysis involved is based on matrix formulation of conventionally direct problem and an assumption on a pure membrane character of residual stress field under study for thin-walled shell. Required error estimations in a case of inspecting thick-walled cylindrical tube are obtained by combining the above-mentioned approach and an analogy of reconstructed fringe patterns with actual and artificial interferograms, which follow from drilling blind hole of the same geometrical parameters in thick-walled plates. Experimental verification of the developed approach is founded upon a determination of actual stresses in thin-walled cylindrical shell and obtaining residual stress distributions at the proximity of welded joint in thick-walled cylindrical tube.     

正赝复合全景像全息术

本文提出一种利用正、赝再现像,将物体的正、反两面信息复合在一起的全息术.在一张全息干板片上,可以同时看到物体的两面,增强立体效果和艺术感.文中介绍了原理、方法和结果.     

显示反射全息图单光束相干复制技术

描述用单光束激光复活制银盐白光显示反射全息图的技术，本技术的关键：１）母全息图的颜色必须恢复到满足其布拉格条件；２）复制所用的光波与记录母全息图时的参考的相同；（３）复制所用的激光采用平行偏振，以减少界面反射；９４）采用白糖溶液作为折射率匹配液，取得极佳效果。     

Direct amplitude detection of Zernike modes by computer-generated holographic wavefront sensor: Modeling and simulation

A fast holographic wavefront sensor is proposed using a computer-generated hologram (CGH). This CGH is a multiplexed hologram of different Zernike mode–amplitude combinations, and is designed in such a manner as to get the corresponding spots on the detector according to the presence and strength of a particular aberration. Interference between the aberrated wavefront (with a single mode–amplitude combination) and the Fourier transform of an image with single bright pixel (defined as dot image) is numerically calculated for one hologram. Different mode–amplitude combination and corresponding different positions of bright pixels (dots) are taken to compute various holograms and then all the holograms are multiplexed to get the final hologram. When the aberrated wavefront with a particular mode–amplitude combination is incident onto the multiplexed hologram, the corresponding dot is generated in the Fourier plane. A lens performs the Fourier transform in optical domain and provides the instant detection of amplitude of the respective Zernike mode. The main advantage of the scheme is to avoid the need of any computations, which makes it really fast. The simulation results are presented with the cross-talk analysis for few Zernike terms.     

计算全息补偿法制作全息凹面光栅的改进

鉴于计算全息图可以产生一个任意形状的波面,用它作为位相补偿板来制作全息凹面光栅以适应消象差的要求比普通光学全息法更具灵活性,而且消象差波长的选择也不受制作时所用的光源光波波长所限制。本文中采用了离轴滤波及改变参考波面特性等措施,大大提高了计算全息图的空间带宽积,扩大了这一方法的使用范围。对1200l/mm的Ⅲ型及Ⅳ型凹面全息光栅进行了设计,制作及实验验证。     

浅谈全息图的复制

简要介绍了将原全息图再现和接触复制法两种全息图复制的原理与方法.进一步采用接触复制法的方法,利用激光作为光源进行了全息图的复制实验研究.实验结果表明复制的全息图再现像图像比较清晰,层次分明.     

Real-time optical reconstruction of the diffused 3D object using phase information calculated by Continuous Wavelet Transform

We propose the real time optical reconstruction of a three-dimensional (3D) object from a digitally recorded hologram. Phase distribution of the recorded hologram is numerically calculated by 1-dimensional Continuous Wavelet Transform (1D-CWT) for digital reconstruction with phase only information. Also, the phase distribution of 1D-CWT transferred to the spatial light modulator (SLM) is used to obtain optically reconstructed image. It is observed that an efficient real-time analysis can be achieved, if phase of 1D-CWT is used. In the same time, optically reconstructed 3D objects obtained by only phase information are about three times brighter than bleached hologram intensity's. So the minimum power loss can be obtained. Numerical and experimental results are presented.     

一种离轴计算全息图在凹非球面检测中的应用

为了精确检测大口径非球面面型质量,将CGH作为补偿器应用于凹非球面的离轴全息检测系统中.根据计算全息图的离轴全息检测系统检测凹非球面的基本原理,分析了离轴CGH的计算、制作过程,实现了对口径为150 mm,近轴半径为1499.7 mm,非球面系数为-1的凹非球面镜的检测.实验结果与轮廓仪检测结果吻合得很好.