Comparison of voiding mechanisms in semi-crystalline polyamide 6 during tensile and creep tests

Behaviour of a semi-crystalline polymer, polyamide 6, described by loading curves, as well as necking and whitening phenomena, is related to its micro-structural evolution in terms of void morphology and distribution during both tensile and creep tests. Notched bars have been subjected to creep tests interrupted at the onset of the tertiary creep stage and at the onset of final rupture. Inspections of these specimens using Synchrotron Radiation Tomography have been coupled with statistical image analysis treatment to obtain spatial distributions of void length and void volume fraction. Cavitation mechanisms observed and quantified during creep and tensile tests were similar: from penny shaped voids (diameter larger than height) perpendicular to the drawing direction to cylindrical voids (diameter equal to the height) arranged in columns during the neck extension. The void volume fraction distributions along radial and axial directions presented an inverted parabolic profile with a maximum located at the centre of the sample.     

Precision of Raman depolarization and optical attenuation measurements of sound tooth enamel

The demineralization of enamel that is associated with early caries formation affects the optical properties of the enamel. Polarized Raman spectroscopy and optical coherence tomography have been used to detect these changes and potentially offer a means to detect and monitor early caries development. The total optical attenuation coefficient as measured by optical coherence tomography and the polarization anisotropy of the Raman peak arising from the symmetric ν₁ vibration of at approximately 959 cm⁻¹ have been demonstrated as being sensitive markers of early caries. This ex vivo study on extracted human teeth demonstrates that these measurements can be made with reasonable precision with concomitantly good repeatability and reproducibility in sound enamel. Such reliability is crucial for these techniques to have a practical clinical value.     

新型成像技术的实验系统研究

光学相干层析成像是一种新型成像技术。超辐射发光二极管和超短脉冲飞秒激光是能满足成像系统要求的理想光源。在开展光学相干层析相关技术研究的基础上 ,建立了国内第一台上述两种光源的成像实验研究装置 ,对系统的横向、纵向分辨率等基本性能进行了测定 ;并对多种实际样品进行了层析成像。     

卷积反投影法重建温度场

电子散斑干涉技术是近年发展起来的一门新兴的测量技术,它由光干涉原理测量物理场的密度、温度分布等,这种测量技术是由物理场在不同截面、不同方向上的投影值反求场分布,这非常类似于CT技术。简述二维重建的基本原理,着重介绍卷积反投影重建算法。依此原理,模拟了双高斯分布函数的投影,并由平行束卷积法重建出模拟的温度场。为了指导电子散斑干涉实验,模拟了三种可能实验误差,并分别给出了重建结果。由于电子散斑干涉测量(投影)的方向个数小,提出了双线性滤波算法,使在测量值稀疏的条件下得到较好重建结果。     

光学层析技术在中央处理单元散热中的应用研究

将光学层析技术实际应用于中央处理单元（ＣＰＵ）散热产生的温度场的重建中,指出了由多方面干涉投影重建三维场的实际应用意义。成功地解决了稳态场和似稳态场的我步步投影的获取问题。     

光学相干层析成像系统的实验研究

介绍了作者研究建立的光学相干层析（ＯＣＴ）成像系统,给出了利用该系统得以的实际生物样品光学相干层析图像,并对系统性能和结果作了分析,讨论了影响系统性能的一些因素及改进方法。     

激光相干层析成像的光散射模拟计算

利用低相干光作为光源的光学相干层析技术是一种新型成像技术。本文利用蒙特－卡罗（Ｍｏｎｔｅ－Ｃａｒｌｏ）模拟计算方法研究了该技术在不同的散射条件下,相干调制信号随散射系数的变化关系,得出了单次散射和多次散射的差别以及它对成像质量的影响,并进一步讨论了利用单次散射和多次散射信号,提高光学相干层析术图像清晰度和信号强度的方法。还研究了光束半径大小对成像分辨率的影响及变化过程,得出了对实验有指导意义的结果     

应用电容层析成象和压差对比法对流化床内固体颗粒浓度分布的测量研究

本文报告了一种可以用于对流化床内固体浓度分布测量的电容层析成象技术。应用这一技术的测量结果,与目前常用的压差法测量结果进行了对比。对在鼓泡流化床的测量结果,二者吻合较好,偏差在８．５％以内;随着流化速度增加,二种测量结果的差距逐渐增加,偏差最大值产生在腾涌流化状态。本文分析了造成偏差的原因,并对二种测量方法的特性进行了讨论。