辅酶Ⅰ在Co／CFUE上的电化学行为及应用

辅酶I(NAD+)在0.005moL/LTris 0.01moL/LNaCl溶液(pH7.0)中,于钴离子注入修饰碳纤维电极上出现一个S形的还原波,半波电位为-1.45V(vs.SCE)。峰电流与NAD+的浓度在2.38×10-5～4.76×10-4mol/L(r=0 9992)和4.76×10-4～1.78×10-3mol/L(r=0.9982)之间成线性关系,检出限为1.19×10-5mol/L,回收率在96.7%～103.4%之间。用线性扫描、循环伏安法研究了钴离子注入修饰碳纤维电极上NAD+的电化学行为。电极反应机理为:NAD++e NAD·;NAD·+e+H+ NADH;2NAD·→NAD2。另外,钴离子注入修饰碳纤维电极对NAD+具有电催化作用。     

溶胶-凝胶-钴-邻菲啰啉修饰电极对一氧化氮的电催化氧化及其测定

报道了溶胶 凝胶 钴 邻菲口罗啉膜修饰电极的制备方法及其在一氧化氮(NO)检测中的应用,采用循环伏安法(CV)研究修饰电极的电化学特性,差示脉冲伏安法(DPV)对NO进行检测。该修饰电极对NO的电化学氧化具有很好的催化作用,使其氧化电位负移了210mV,氧化峰电流与NO浓度在5.6×10-8～2.8×10-5mol/L范围内呈良好的线性关系,相关系数r=0.999,检测限为1.4×10-8mol/L,且生物体内常见的干扰物质如抗坏血酸、NO2-和儿茶酚胺类神经递质的代谢物等不干扰测定。     

钴铈复合金属氧化物催化剂上氧化亚氮催化分解性能研究

采用共沉淀法制备了一系列钴铈复合金属氧化物催化剂CoCex(x=0～0.2,x为Ce/Co摩尔比),进行了比表面积和XRD表征,并考察了它们对氧化亚氮催化分解反应的活性.结果表明,随着铈添加量的增加,催化剂上钴尖晶石相的衍射峰逐渐宽化,同时催化剂的比表面积逐渐增大;催化剂的活性随着铈添加量的增加先升高,然后下降,CoCe0.05催化剂表现出了最佳催化活性.在对CoCe0.05催化剂制备条件的考察实验中发现,共沉淀过程中控制pH值在9左右,于400 ℃焙烧得到的催化剂的活性最好.当反应气氛中存在O2或H2O时,CoCe0.05催化剂上N2O的分解反应受到抑制,但这种影响是可逆的,可能是由于它们与N2O在相同的活性位上存在竞争吸附.     

A new Co(II) complex with N,O-donor Schiff base: Synthesis, structure and characterization

A new Co(II) complex with tridentate Schiff base ligand with a N,N,O donor set has been synthesized and characterized by single X-ray technique and spectroscopic techniques. The thermochemical properties have been studied. X-ray structure analysis of the title compound Co(II)L₂ [HL = 2-methyl-6-(2′-hydroxybenzylideneamino) pyridine] shows that the polyhedron around Co(II) is a distorted tetrahedron, and the self-assembly via intermolecular π-π interactions leads to a three-dimensional network. Crystal data for the title complex C₂₆H₂₂CoN₄O₂: Monoclinic, space group Ia, a = 11.741(7) Å, b = 8.149(5) Å, c = 22.764(16) Å, β = 98.530(12)°, V = 2154(2) ų, Z = 4.     

Crystal Structure Analysis of Tetras[L-tris(ethylenediamine) cobalt(Ⅲ)] tris[hexacyanoruthenate(Ⅱ)]

1 INTRODUCTION The tris(ethylenediamine) cobalt (Ⅲ) complex in which there are L and D configurations is one of the very interest cations due to the chirality among research complexes and the characterization of reaction on the ion-pair charge-transfer transitions. It has been mentioned in a lot of examples on the chirality and the structure, such as [L-Co(en)3]- [?Co(edta)]2Cl?0H2O[1], [(+)DCo(en)3]Cl3稨2O[2], [(+)-Co(en)3?-)-Cr(en)3]Cl?.1H2O[3], [()-Co(en)3] (SCN)3[4], [(+)D…     

Methane Combustion Over Fe, Co and Ni Modified Manganese Oxide Catalysts

Fe-Mn, Co-Mn and Ni-Mn composite oxide catalysts based on high specific surface area MnO₂ precursor were prepared and applied to catalytic combustion of CH₄. Results were compared with that of unmodified MnOx and 1wt.% Pd/-Al₂O₃. Below 450°C, manganese oxide catalysts show higher activity than Pd/-Al₂O₃, while the modified manganese oxide catalysts exhibit higher activity than the unmodified one below 420°C. All catalysts were characterized by means of N₂-BET, XRD, TG-DTA and H₂-TPR. Due to the interaction between Fe, Co or Ni oxides and manganese oxide, the activity of the oxygen species of the modified catalysts is improved, which leads to the increase of their CH₄ combustion activity.     

低钴AB5型稀土系贮氢电极合金的研究

为了进一步降低AB5型混合稀土系贮氢合金的成本,采用Cr,Si,Cu替代Co和调节化学计量比的方法制备低钴AB5型贮氢合金。结果表明:3种取代元素在寿命方面的效果依次为Si>Cr>Cu,在放电容量和活化性能方面依次是Cu>Cr>Si。Cr,Cu,Si只有少量的替代才可能发挥其有利影响;通过非化学计量比的调节,低钴混合稀土系贮氢电极合金的放电容量、活化性能及倍率放电能力都能较好地达到实用要求,但是循环寿命有待提高。     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

Hydrothermal Synthesis,Crystal Structure and Thermal Analyses of Pyrazine-2,3-dicarboxylic Acid Bridged Co(II) Coordination Polymer of _∞~2[Co(phen)(μ-L)_(3/3)]·H_2O (H_2L = Pyrazine-2,3-dicarboxylic Acid)

1 INTRODUCTION Molecular assembly and supramolecular che-mistry are young and rapidly growing subjects andhave attracted great attention. Microporous materialsbuilt up by organic ligands and metal ions have po-tential applications in catalysis, chemical absorption,magnetism and electronic conductivity[1～3]. Multi-dentate organic ligands are good building blocks,such as 1,2,4,5-benzene tetracarboxylic acid (BT-CA), 1,3,5-benzene tricarboxylic acid, terephthalicacid, 1,10-phenanthrol…     

The Reactivity of Cr‐Te Superlattice Reactants and of Co‐deposited Cr‐Te Films: Studies with in‐situ X‐ray Diffractometry

The reactivity of a Cr‐Te multilayer film consisting of 326 Cr/Te double‐layers with about 88(3) at% Te was investigated with in‐situ X‐ray diffraction. The occurrence of a superstructure reflection caused by the multilayer system is observed. During the annealing procedure between 80 and 90 °C the layer‐by‐layer arrangement is destroyed and elemental Te crystallizes. After 6 h isothermal annealing at 140 °C CrTe₃ starts to crystallize. The amount and the crystal size of CrTe₃ increase with raising temperature and Te is consumed during the growth process. At 220 °C the formation of crystalline Cr₂Te₃ is observed and between 220 and 260 °C CrTe₃ is completely decomposed into Cr₂Te₃. The two Cr tellurides grow as highly textured materials. The size of CrTe₃ crystals is significantly larger than that of Cr₂Te₃. For a co‐deposited Cr‐Te film with composition 77(3) at% Te the tri‐telluride and elemental Te crystallize simultaneously. The texture of CrTe₃ is less pronounced and different reflections of the tri‐telluride occur besides the (h00)‐reflections. Up to 160 °C a pronounced increase of the crystallite size is observed and the crystals are significantly larger than those obtained with the multifilm sample. At 130 °C the crystallization kinetics seem to be controlled by nucleation.