Composition and spectral studies of polyaniline salts

Five different polyaniline salts have been prepared by chemical polymerization of aniline in aqueous solution of different acids. The polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Electron paramagnetic, electronic absorption, infrared spectral and conductivity measurements have been performed on the polyaniline salts and polyaniline bases. This composition and the extent of dopant in polyaniline salt systems have been determined. There is no definite correlation between the conductivity and the stoichiometric ratio between the polyaniline base and the acid, and also the spin concentration.     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

Probing the hydride transfer process in the lumiflavine-1-methylnicotinamide model system using group softness

The hydride transfer process between the isoalloxazine moiety of flavins and the nicotinamide moiety of NAD(P)H has been explored by using density functional theory based reactivity index in the 1-methylnicotinamide-lumiflavine model system. Based on crystallographic data available, we have found that the group softness index helps to locate and orientate reactive regions in these interacting molecules while the electrophilicity index successfully describes the reactivity pattern of this system.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

DMF-甲醇体系粘度与核磁共振化学位移的同时关联

提出了一个基于局部组成概念上的核磁共振模型. 利用该模型和以前别人提出的局部组成型粘度方程, 成功地同时关联属于传递性质的粘度数据和属于波谱性质的核磁共振化学位移数据，关联所得到化学位移的平均绝对偏差小于0.0072，粘度的平均绝对偏差小于0.0006 mPa•s，结果表明提出的局部组成模型是合理的.     

Classical Valence Similarity in Fullerene Derivatives

Summary.  The generalized Pauling bond order was enumerated in the C₆₀ fullerene cage molecule (truncated icosahedral symmetry). This index measures chemical similarity in fullerene derivatives such as dihydrofullerene (C₆₀H₂), anionized monohydrofullerene (C₆₀H⁻), N-substituted monohydrofullerene (C₅₉NH), the fullerene dimer ((C₆₀)₂), and the dianionic fullerene dimer ((C₆₀)₂ ²⁻). It is also useful in judging the chemical stability of isomers. Received October 9, 2001. Accepted November 9, 2001     

Nafion-PAN optical chemical sensor: optimization by FIA

A copper-sensitive optical chemical sensor (optrode) is described. The optrode is based on a Nafion membrane and an immobilized organic ligand coupled with a flow injection (FI) system. The FI system includes a flow-through removable measuring cell and a simple spectrophotometer. Owing to the miniature size of the system and the efficient use of optical fibers, this optrode is well suited for monitoring environmental water samples. The success of the described optrode system depends on the effectiveness of the FI reagent delivery system. Optimum contact time with the membrane (as determined by the reagent flow rates) and the injected sample volume are critical. Environmental water samples were analyzed for copper content using the optimized optrode system. To validate the optrode's performance, the same water samples were analyzed using the atomic absorption spectrophotometer.     

化学气相淀积法合成氮化铝薄膜及其工艺设计

对ＡｌＢｒ３－ＮＨ３－Ｎ２体系化学气相淀积法合成Ａ１Ｎ膜进行了热力学分析和工艺设计，研究了在不同淀积温度和体系总压时，体系中主要气态物种的平衡分压和Ａ１Ｎ膜的理论淀积速率与源温和载气流量的关系，并与微波等离子体化学气相淀积Ａ１Ｎ膜的实验结果进行了比较。     

Computation of cross sections for the F+H2(v=0,j=0) → FH(v′j)+H reaction by the hyperspherical method

Summary A quantum mechanical calculation of cross sections for the reaction F+H₂(v=0,j=0) FH(vj)+H has been performed on the T5A semiempirical potential surface using hyperspherical coordinates. State-to-state integral and differential cross sections converge rapidly with the number of components of the total angular momentum projection onto the axis of least inertia. Thev=3 differential cross section has a forward peak whose magnitude increases with energy whereas thev=2 differential cross section has a backward maximum, in qualitative agreement with cross-beam experiments. Thev=2 andv=3 rotational distributions are in rather good agreement with experiment, but not the vibrational branching ratios.