Three-component,one-pot synthesis of 3,4-dihydropyrimidin-2-(1<Emphasis Type="Italic">H</Emphasis>)-ones catalyzed by bromodimethylsulfonium bromide

An efficient synthesis of 3,4-dihydropyrimidin-2-(1H)-one derivatives by one-pot three-component condensation reaction between an alkyl or aryl aldehyde, a 1,3-dicarbonyl compound, and urea or thiourea in the presence of catalytic amount of bromodimethylsulfonium bromide has been developed. The condensation product was obtained in excellent yields in refluxing ethanol and easily separated from the reaction mixture and purified.     

制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。     

M~＋＋BrCN─→MCN~＋＋Br气相反应的从头算研究

Ｍ~＋＋ＢｒＣＮ─→ＭＣＮ~＋＋Ｂｒ气相反应的从头算研究朱荣顺，戴树珊（云南大学化学系，昆明，６５００９１）关键词气相反应，过渡金属阳离子，溴化氰，从头算，相对论赝势对过渡金属离子与一些小分子的气相反应已有大量的实验和理论研究［１～５］，ＭｉｃｈｅｌＳ...     

镉—溴化物—罗丹明B高灵敏显色反应的研究：离心光度法测定镉

本研究了一个高灵敏的测定镉的方法，离心光度法，该体系络合物λｍａｘ＝５６０ｎｍ，表观摩尔吸系数ε５６０＝５．０６×１０＾８Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｄ＾２＋浓度０．１０×１０＾－２－１．０×１０＾－２μｇ／１０ｍＬ呈线性关系，本法已用于血清和水中痕量镉的测定，探讨了高灵敏的显色反应机理。     

伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

Interactions of Some Amino Acids with Aqueous Tetraethylammonium Bromide at 298.15 K: A Volumetric Approach

The apparent molar volumes, V_,2, of glycine, L-alanine, DL--amino-n-butyric acid, L-valine, and L-leucine have been determined in aqueous 0.25, 0.75, 1.0, and 1.5 mol-dm^–3 tetraethylammonium bromide (TEAB) solutions by density measurements at 298.15 K. These data have been used to calculate the infinite dilution apparent molar volumes, V_2,m, for the amino acids in aqueous tetraethylammonium bromide and the standard partial molar volumes of transfer (_tr V_2,m) of the amino acids from water to the aqueous salt solutions. The linear correlation of V_2,m for a homologous series of amino acids has been utilized to calculate the contribution of the charged end groups (NH₃⁺, COO^–), CH₂ group, and other alkyl chains of the amino acids to V_2,m. The results of the standard partial molar volumes of transfer from water to aqueous tetraethylammonium bromide have been interpreted in terms of ion–ion, ion–polar, and hydrophobic–hydrophobic group interactions. The volume of transfer data suggest that ion–ion or ion–hydrophilic interactions are predominant in the case of glycine and alanine, and hydrophobic–hydrophobic group interactions are predominant in the case of DL--amino butyric acid, L-valine, and L-leucine.     

Micellar effects of surfactants in cleavage of 4-nitro-phenyl diethyl phosphonate by hydroperoxide anion

We have studied the nucleophilicity of the hydroperoxide anion relative to 4-nitrophenyl diethyl phosphonate (NPDEPS) in the presence of cetyltrimethylammonium bromide (water, 25 °C) while varying the acidity of the medium and the hydroperoxide anion concentration over a broad range. The increase in the reaction rate when the reaction is transferred to a micellar pseudophase is as high as ∼10-fold, which is explained by concentration effects. In CTAB micelles, as in water, the hydroperoxide ion is one of the most effective α-nucleophiles, and the size of the α-effect, characterized by the ratio of the second-order rate constants for reactions of HOO⁻ and OH⁻ anions with NPDEPS, remains practically constant and reaches a value of ∼50-fold. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 6, pp. 357–363, November–December, 2006.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.