SYNTHETIC STUDIES ON BLOOD COMPATIBLE BIOMATERIALS 13:A NOVEL SEGMENTED POLYURETHANE CONTAINING PHOSPHORYLCHOLINE STRUCTURE:SYNTHESIS,CHARACTERIZATION AND BLOOD COMPATIBILITY EVALUATION

A new phosphorylcholine, (6-hydroxy) hexyl-2-(trimethylammonio) ethyl phosphate (HTEP), was synthesized andcharasterized. Segmented polyurethane (SPU) containing phosphorylcholine structure was synthesized based ondiphenylmethane diisocyanate (MDI), soft segment polytetramethylene glycol (PTMG) and HTEP, with 1,4-butanediol (BD)as a chain extender. The existence of phosphorylcholine structure on the surface of SPU was revealed by attenuated totalreflectance Fourier transform infrard spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and water contactangle measurements. The blood compatibilities of the polymers were evaluated by hemolytic testing and a platelet-richplasma (PRP) adhesion experiment, which was viewed by scanning electron microscopy (SEM) with polyurethane as areference. The novel segmented polyurethane containing phosphorylcholine structure showed improved blood compatibility.     

Analytical techniques for cyanide in blood and published blood cyanide concentrations from healthy subjects and fire victims

Hydrogen cyanide can be produced by the pyrolysis of man-made polymers. Cyanide has been measured in the blood of healthy adults as well as the blood of fire survivors and fatalities. In healthy subjects the blood cyanide concentration of smokers is higher than that of non-smokers. Fire survivors and fatalities have been found to have higher cyanide levels than of control groups and the levels from fire fatalities are often higher than survivors. Blood concentrations quoted as normal, toxic or fatal are highly variable in the literature. Many studies have been performed to measure the blood cyanide levels in control subjects as well as those who have been exposed to fire but the values found differ. The values for control subjects can vary from none detected to 19 μmol dm⁻³ while those for fire survivors range from not detected to 150 μmol dm⁻³ and fatalities range from not detected to 284 μmol dm⁻³. Analytical techniques and published data are critically reviewed.Many of the existing antidotes for cyanide poisoning are highly toxic themselves and should ideally be administered at doses proportional to the amount of cyanide a patient has received to avoid compounding damage done by cyanide intoxication. For this reason, a rapid, accurate bedside assay of blood cyanide concentration that differentiates between bound and free cyanide would represent a leap forward in the clinical management of cyanide poisoning.     

职业性铅接触对血压影响的研究

对１１８名铅接触工人及１０８名对照组工人的血压研究发现，在血铅为４４．２６μｇ／ｄＬ时，铅接触工人的收缩压显著高于对照组，分组研究发现，收缩压在级组剂量－反应关系趋势，在血铅３０．２０μｇ／ｄＬ，收缩压显著高于对照组，多元逐步回归分析发现，在控制一些其他影响血压的因素后，铅接触工人的血铅水平与收缩压和舒张压均有剂量－反应关系。     

The role of proficiency testing in the detection and resolution of calibration bias in the LeadCare® blood lead analyzer; limitations of peer-group assessment

Following implementation of the CLIA ‘88 laboratory regulations, the primary role of proficiency testing (external quality assessment, PT) in the U.S. has been widely viewed as one of assuring regulatory compliance. PT can also be an effective tool for detecting widespread analytical problems, subject to limitations based on the method of PT assigned value determination. A recent case study describes the role of two PT programs in detecting and resolving a calibration bias in the LeadCare blood lead analyzer, and illustrates the limitations of peer-group target determination in fulfilling that PT role.     

Sampling procedure and a radio-indicator study of mercury determination in whole blood by using an AMA 254 atomic absorption spectrometer

A sampling procedure appropriate for the determination of mercury in whole blood was tested by using both inactive controls and a ¹⁹⁷Hg mercury radio-indicator. To exclude the influence of the instrumental device (an AMA 254 single-purpose mercury atomic absorption spectrometer) on the determination of mercury in whole blood, the function of the instrument was checked by using rat blood with metabolised ¹⁹⁷Hg. The measurement procedure was found to be free of errors. However, the study showed that the material used for the sampling vessels is a crucial parameter for obtaining accurate analytical results. The stability of solutions and samples was tested towards polyethylene (PE) and polypropylene (PP) vessels. PE displayed a time-dependent increase in the mercury content both in the samples and in the blood control material. The probable cause of this increase was direct contamination from the material of the vessel and/or diffusion of mercury from the environment through the vessel walls related to a strong complexing affinity of the sample matrix. This assumption was confirmed by supplying the vessels with the complexing agent Na₂EDTA (0.05 mol L^–1). Commercial PP vessels for blood sampling (Sarstedt S-Monovette Metall Analytik) did not give rise to statistically significant variations in mercury content in the samples and blood control material over a 30-day period.     

A novel non-invasive electrochemical biosensing device for in situ determination of the alcohol content in blood by monitoring ethanol in sweat

A non-invasive, passive and simple to use skin surface based sensing device for determining the blood's ethanol content (BAC) by monitoring transdermal alcohol concentration (TAC) is designed and developed. The proposed prototype is based on bienzyme amperometric composite biosensors that are sensitive to the variation of ethanol concentration. The prototype correlates, through previous calibration set-up, the amperometric signal generated from ethanol in sweat with its content in blood in a short period of time. The characteristics of this sensor device permit determination of the ethanol concentration in isolated and in continuous form, giving information of the BAC of a subject either in a given moment or its evolution during long periods of time (8 h). Moreover, as the measurements are performed in a biological fluid, the evaluated individual is not able to alter the result of the analysis. The maximum limit of ethanol in blood allowed by legislation is included within the linear range of the device (0.0005–0.6 g L⁻¹). Moreover, the device shows higher sensitivity than the breathalyzers marketed at the moment, allowing the monitoring of the ethanol content in blood to be obtained just 5 min after ingestion of the alcoholic drink. The comparison of the obtained results using the proposed device in the analysis of 40 volunteers with those provided by the gas chromatographic reference method for determination of BAC pointed out that there were no significant differences between both methods.     

Microwave Assisted Rupture of Furoxans to Nitrile Oxides and Intermolecular Capture by Dipolarophiles

3,4-Diaroylfuroxans 1 react with various dipolarophiles 3 under microwave activation to afford the cycloadduct 4 instead of the expected isoxazole 5 in good yields in the absence of solvent.     

Electrochemical Monitoring of Methotrexate Anticancer Drug in Human Blood Serum by Using in situ Solvothermal Synthesized Fe3O4/ITO Electrode

Here, we reported on a one‐step fabrication of magnetite Fe₃O₄ nanoparticles/indium tin oxide (ITO) electrode based on the direct growing of Fe₃O₄ nanoparticles on the ITO surface by using a solvothermal process. The modified electrode was used as electrochemical methotrexate (MTX) biosensor with high sensitivity based on cyclic voltammetry and square wave voltammetry techniques. The results demonstrated a linear relationship between the MTX concentration and its oxidation current peak over a wide range from 10^?5 to 10^?14 mole/L with a limit of detection of 0.4×10^?15 M based on the square wave voltammetry (SWV) technique. In addition, Fe₃O₄/ITO electrode showed a good capability for measuring very low concentrations of MTX drug dissolved in human serum solution. Also, Fe₃O₄/ITO electrode was used for detecting MTX in blood serum samples collected from patients after their treatment with MTX. The prepared electrode showed the higher sensitivity that higher than the Viva‐E instrument, which opens the door for developing a cheap, simple and higher sensitive MTX sensor.     

Iron Interference in the Measurement of Selenium in Whole Blood,Plasma and Serum by Graphite Furnace Atomic Absorption

Abstract

Selenium is considered to be a trace element and the determination of diagnostic levels are most conveniently measured in blood, plasma or serum in humans and animals. The approach that is taken varies according to laboratory preferences. One such method involves the use of Graphite furance Atomic Absorption Spectroscopy (GFAAS). The simplicity of diluting the sample followed by direct determination without further preparation is the most attractive characteristic of this method, coupled with good sensitivity. Proper precautions must be taken however, including that of choosing the proper instrumental parameters for the analysis. If deuterium background correctiopn is used then then analyses should be carried out at the 204.0 nm line of Selenium. By using a matrix modifier consisting of Cu/Mg, deuterium background correction and off the wall of the graphite tube atomization, the determination of the analyte was demonstrated to be possible at the mentioned wavelength, free from iron interference present in the samples.     

血液接触生物材料的血液相容性评价研究进展

生物材料的血液相容性是决定该材料能否在临床成功应用的重要标准之一。当材料与血液接触后,会引起溶血、凝血和免疫等一系列反应,机制复杂且受多种因素影响。因此,在材料临床应用前需根据ISO 10993-4进行生物相容性评价,血液相容性评价是其中重要部分,但目前尚未形成统一的评价标准与评价体系。本文总结了近年对血液相容性评价的主要方法,为今后生物材料血液相容性评价体系的建立提供参考。