HAP自组装球的简易合成及其光催化增效作用

选择生物协同模板,通过简单的控制组装工艺,制备出结构均一有序的羟基磷灰石(HAP)纳米组装球.该纳米组装球整体尺寸约5-6 μm,球体中心部分尺寸约为2.5-3 μm.通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、傅里叶变换红外(FT-IR)光谱、比表面积(BET)测试等手段对产物形貌、结构和比表面积进行了表征.产物作为催化剂载体,对氧化锌催化降解罗丹明B (RhB)的催化效率提高了125%,催化剂回收率提高了23.1%,有效降低了催化剂的用量,在有机物降解领域具有潜在的应用价值.同时还对产物的控制生成过程和催化增效机理做了初步探讨.     

Drum-shaped mono-organooxotin assembly through solvothermal synthesis with 2,3,4,5-tetrafluorobenzoic acid: crystal structure,hydrogen bonding and π–π stacking interactions

A drum-shaped organooxotin (IV) complex with 2,3,4,5-tetrafluorobenzoic acid of the type {[SnR₂(2,3,4,5-F₄C₆HCO₂)]O}₆ (R?=?m-Cl-PhCH₂) has been solvothermally synthesized and structurally characterized by elemental, IR, ¹H, ¹³C, ¹¹⁹Sn NMR spectra and X-ray crystallography diffraction analysis. This complex exhibits a new structural environment appearing as a “drum” arrangement with hexa-coordinated tin atoms in a four-membered stannoxane ring, (–Sn–O–)₂, as a common structural feature. Each tin(IV) displays a distorted octahedral geometry. Weak, but significant, intramolecular C–H?···?F hydrogen bonds and π–π stacking interactions are shown. These contacts lead to aggregation and supramolecular self-assembly. Cleavage of Sn–C bond occurred in complexes under the influence of strong acid.     

三聚氰胺甲醛微球的制备及模板法构建聚谷氨酸基微胶囊

以分散聚合法制备低交联度三聚氰胺甲醛(MF)微球, 研究了pH和反应时间等对MF微球粒径、表面电位和溶解性的影响. 以MF微球为模板, 采用层层自组装法交替吸附聚谷氨酸(PGA)和壳聚糖(CS), 构建中空的PGA/CS微胶囊. 采用偏光显微镜、纳米粒度及电位分析仪、红外和透射电镜等进行表征. 结果表明, MF粒径及表面电位随pH值降低而减小, 在盐酸中的溶解性随反应时间延长而变差. 在自组装过程中, 微球表面电位呈正负交替变化, 表明以静电力为主要驱动力制得的空心微胶囊粒径均匀, 分散良好, 模型药物罗丹明可成功载入其中, 有望成为优良的水溶性药物载体.     

一种适用于光突发交换的区分型资源预留机制

将边缘结点突发汇聚算法与核心结点资源预留机制有机结合,提出了一种适用于光突发交换的区分型资源预留机制.引入“突发流”的概念,在边缘结点采用基于线性预测的突发汇聚算法将输入IP分组汇聚为单个突发或突发流;在核心结点引入“搭载请求”的思想,对单个突发和突发流采用不同的资源预留方案.仿真结果表明区分型资源预留机制可以明显改善光突发交换网络的丢失性能.     

细菌化学趋向性受体聚集体的相互作用

细菌化学趋向性受体的最小结构单元为二聚体,在细胞膜上这些二聚体会聚集成大团簇. X射线晶体结构和低分辨电镜结构测定表明,这些团簇有两类不同的形式,一种是在晶体结构中观察到的倒金字塔式二聚体的三聚体重复形成的聚集,另一种为由二聚体尾部相互盘绕形成的拉链状聚集. 有关拉链状聚集的详细分子模型目前尚不清楚. 本文使用蛋白质-蛋白质对接的方法研究了大肠杆菌丝氨酸化学趋向性受体Tsr 二聚体之间的相互作用. 分子对接计算表明,倒金字塔式聚集和拉链状聚集的基本复合物都是可以出现的,相应复合物的分子动力学模拟表明这些结构都具有一定的稳定性. 对于所获得的拉链状聚集体的基本复合物结构模型进行了详细的二聚体作用界面分析,发现二聚体间主要通过静电和疏水作用形成复合物,其中Arg388、Phe373 和Ile377是形成拉链状聚集的关键作用残基. 所建立的Tsr 拉链状聚集的结构模型有助于揭示细菌化学趋向性受体在细胞膜上聚集的分子机制,为进一步的聚集理论及模拟研究提供了基础.     

碳纳米管的定向操作

由于呈现独特的一维结构特征、机械及电子性能,碳纳米管已引起广泛的兴趣,然而涉及到具体的应用就不可避免碳纳米管的定位、定向,这也已成为非常富有挑战性的课题。本文中笔者主要介绍碳纳米管定向操作的最新进展,重点介绍后生长的平面有序定向操作。     

金纳米粒子组装体系SERS化学增强的研究

Gold nanoparticles were assembled on gold substrates with the self-assembled monolayer(SAM) of p-minothiophenol(PATP). AFM measurements disclose that gold nanoparticles are scattered over the surface of the substrate with a submonolayer coverage. The Raman signal of the coupling layer, the SAM of PATP, can be well observed. Potential-dependent measurements were performed to study the chemical enhancement in SERS of such a system. Based on the supposition that the direction of charge transfer is from gold nanoparticles to PATP, it is deduced that Herzberg-Teller contribution has ruled in the SERS of such a system.     

FABRICATION OF PHOTONIC CRYSTAL WITH SUPERLATTICES

1. INTRODUCTION The very latest subject of physics to surface in biology is the photonic crystal, which is ordered, subwavelength structured material capable of controlling the propagation of light in the similar manner as which atomic crystal control electrons [1,2]. Due to the application of the photonic crystal in laser, integrated optical circuit, it attracted great attention in the past decade. Photonic crystals can be fabricated by microfabrication methods, holographic methods, and c…     

Haplotype assembly from aligned weighted SNP fragments

Given an assembled genome of a diploid organism the haplotype assembly problem can be formulated as retrieval of a pair of haplotypes from a set of aligned weighted SNP fragments. Known computational formulations (models) of this problem are minimum letter flips (MLF) and the weighted minimum letter flips (WMLF; Greenberg et al. (INFORMS J. Comput. 2004, 14, 211-213)). In this paper we show that the general WMLF model is NP-hard even for the gapless case. However the algorithmic solutions for selected variants of WMFL can exist and we propose a heuristic algorithm based on a dynamic clustering technique. We also introduce a new formulation of the haplotype assembly problem that we call COMPLETE WMLF (CWMLF). This model and algorithms for its implementation take into account a simultaneous presence of multiple kinds of data errors. Extensive computational experiments indicate that the algorithmic implementations of the CWMLF model achieve higher accuracy of haplotype reconstruction than the WMLF-based algorithms, which in turn appear to be more accurate than those based on MLF.