Determining PCB desorption behaviour on sediments with SFE and investigating the dependency of selective fractions on sediment characteristics

A method for studying PCB desorption behaviour from sediments using supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE) is presented. Four sediments were investigated and extracted with supercritical carbon dioxide employing increasingly harsher extraction conditions ranging from 40°C and 12?MPa to 100°C and 36.5?MPa. To ensure quantitative extractions, the remaining SFE residues were also extracted with PLE. Resulting profiles identified at least three different PCB fractions within the four sediments. Furthermore, a distinct fraction was obtained with extraction for 2?h at 40°C and 36.5?MPa. This fraction has previously been found to correlate well with bioavailable fractions. The dependency of this fraction on sediment total organic carbon (TOC) was investigated, both for sediments examined in this study as well as for previously reported values using the same extraction conditions. It was found that TOC does not correlate to selective SFE, which indicates that the use of TOC to predict bioavailability is questionable.     

Fabrication of ozone gas sensor based on FeOOH/single walled carbon nanotube-modified field effect transistor

A novel ozone (O₃) sensor is fabricated using commercial metal oxide field effect transistor (MOSFET), modified with single-walled carbon nanotubes (SWCNTs). In this study, integrated circuit (IC: BS250) was selected as the selective probe for O₃ detection. For this purpose, a plastic cover on the surface of the drain was drilled to bare the drain surface, followed by its modification with nitrogen and sulfur-functionalized SWCNTs by chemical vapor deposition (CVD) process. The CVD-synthesized SWCNTs were then electrodeposited with FeOOH nanostructures. According to the figures of merit, the fabricated sensor gave a linear output from 20 to 450 parts per billion (ppb). Detection limit was also 4.1?ppb. Relative standard deviation (RSD) for seven replicate analyses was 3.61%. Based on 90% of maximum response (t₉₀), the response time was ～1.5?min. Calibration sensitivity was measured to 1.3?mV/ppb. No interference was observed, when introducing at least 500 folds of interferences of gaseous species such as H₂O, HCl, H₂S, O₂, H₂, CO, CO₂, NO₂, SO₂, Cl₂, C₂H₂, CH₄ and volatile organic compounds (VOCs) to 250?ppb of O₃ solution. Reliability of the sensor was also evaluated via determination of O₃ in different air samples.     

Solid-phase extraction using multiwalled carbon nanotubes and quinalizarin for preconcentration and determination of trace amounts of some heavy metals in food,water and environmental samples

A solid phase extraction procedure has been developed using multiwalled carbon nanotubes (MWCNTs) as a solid sorbent and quinalizarin [1,2,5,8-tetrahydroxyanthracene-9,10-dione] as a chelating agent for separation and preconcentration of trace amounts of some heavy metal ions, Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) before their determination by flame atomic absorption spectroscopy (FAAS). The influences of the analytical parameters, including pH, amounts of quinalizarin and adsorbent, sample volume, elution conditions such as volume and concentration of eluent, flow rates of solution and matrix ions, were investigated for the optimum recoveries of the analyte ions. No interference effects were observed from the foreign metal ions. The preconcentration factor was 100. The detection limit (LOD) for the investigated metals at the optimal conditions were observed in the range of 0.30–0.65 μg L^?1. The relative standard deviation (RSDs), and the recoveries of standard addition for this method were lower than 5.0% and 96–102%, respectively. The new procedure was successfully applied to the determination of analytes in food, water and environmental samples with satisfactory results.     

Very sensitive differential pulse adsorptive stripping voltammetric determination of 4-nitrophenol at poly (diphenylamine)/multi-walled carbon nanotube-β-cyclodextrin-modified glassy carbon electrode

In this work, a glassy carbon electrode (GCE) modified with poly (diphenylamine)/multi-walled carbon nanotubes-β-cyclodextrin (PDPA/MWCNT-β-CD) film was constructed and used for the determination of 4-nitrophenol (4-NP). Diphenylamine was successfully electropolymerised onto MWCNT-β-CD-modified GCE by cyclic voltammetry in monomer solution and 5 mol L^?1 H₂SO₄. The surface morphology of PDPA/MWCNT-β-CD film was characterised using scanning electron microscopy and electrochemical impedance spectroscopy. After adsorption of 4-NP on PDPA/MWCNT-β-CD at 0.2 V for 150 s, it showed a well-defined reduction peak in phosphate buffer solution at pH = 7. The PDPA/MWCNT-β-CD film enhanced the reduction peak current due to the complex formation between β-CD and 4-NP, presence of conductive polymer film as electron transfer mediator and also ability of MWCNTs for strong adsorptive and catalytic effect. Peak current increased linearly with 4-NP concentration in the range of 0.1 to 13.9 µg L^?1. The detection limit was obtained as 0.02 µg L^?1, which is better than other reported detection limits for the determination of 4-NP. The results showed that modified electrode has good sensitivity and selectivity. This sensor was used for the determination of 4-NP in water samples.     

Highly sensitive ion preconcentration method based on flow sorbent extraction using multiwall carbon nanotubes

In this work a solid phase on-line uranium ion preconcentration system coupled with spectrophotometry has been developed. The method is based on uranyl ion preconcentration at pH 3.75 onto multiwall carbon nanotubes treated with HNO₃. After preconcentration, the uranyl ions are eluted with 0.32?mol?L^?1HCl followed by reaction with 3,6-bis[(2-arsonophenyl)-azo]-4,5-dihydroxy-2,7-naphthalendisulfonic acid 0.08%[w/v] (Arsenazo III), which had maximum monitored absorbance of 650?nm. Effects of the pertinent experimental parameters on the system were investigated by means of 2^6?2 fractional factorial design, while optimization was carried out using the Doehlert matrix. Under optimized conditions, detection and quantification limits were found to be 0.21 and 0.7?µg?L^?1, respectively. The analytical curve ranged from 5 to 150?µg?L^?1 (r?=?0.998), while the relative standard deviations (RSD) were 3.27 and 2.56% for the respective uranium concentrations of 10 and 100?µg?L^?1 (n?=?10). The features obtained for the on-line preconcentration system were: preconcentration factor of 228, concentration efficiency of 57?min^?1, consumption index of 0.13?mL and sample throughput of 15?h^?1. In order to assess the accuracy of the proposed method, addition and recovery studies were carried out on spring water samples from different sources and synthetic seawater with satisfactory results ranging from 94.85 up to 103.65%.     

Determination of 1-hydroxypyrene in human urine by a multi-wall carbon nanotubes-modified glassy carbon electrode

A multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (MWNT-GCE) was used to study the electrochemical behaviour of1-hydroxypyrene (1-OHP) and applied to its determination. The results showed that the modified electrode had a strong adsorptive ability to 1-OHP and enhances its electrochemical signal. By square wave voltammetry, the linear relationship of 1-OHP was 6?×?10^?9???8?×?10^?7?mol?L^?1 with a linear correlation coefficient of 0.996, and the detection limit was 1?×?10^?10?mol?L^?1. Compared with other published methods, this newly proposed method possesses many advantages such as very low detection limit, fast response, low cost and simplicity. And this method was applied successfully in the determination of 1‐OHP in real human urine samples.     

Adsorptive transfer voltammetry applied to the study of chromium-induced DNA damage in the presence of curcumin

The interaction between double-stranded (ds) calf-thymus DNA and chromium in the presence of curcumin (CC) was studied by differential pulse adsorptive transfer voltammetry using carbon paste electrode (CPE). Curcumin–Cr complex generated changes in calf thymus DNA. The mechanism for DNA cleavage by curcumin–Cr complex appears to involve both the hydroxyl radical as well as singlet oxygen. The characteristic peak of dsDNA, due to the oxidation of guanine residues, drastically decreased. The increased DNA damage by curcumin–Cr complex was observed in the presence of various concentrations of chromium(VI).     

Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

Chemically bonded multiwalled carbon nanotubes as efficient material for solid phase extraction of some metal ions in food samples

Multiwalled carbon nanotubes chemically functionalized with 2-((3-silylpropylimino) methyl) phenol (SPIMP-MWCNT) and successfully applied for the solid phase extraction (SPE) of some metal ions in food samples. The influences of the analytical parameters including pH, amounts of solid phase, eluent conditions (type, volume and concentrations), sample volume and interference of some metal ions on the recoveries of ions Cu²⁺, Pb²⁺, Fe²⁺, Ni²⁺ and Zn²⁺ ion were investigated. The metal ions retained on SPIMP-MWCNT was eluted using 6?mL of 4?mol?L^?1 HNO₃ solution and their content was determined by flame atomic absorption spectrometry (FAAS) with recoveries more than 95% and relative standard deviations (n?=?5) between 2.4–3.4% for both reproducibility and repeatability. The detection limit of this metal ions was between 1.0–2.6?ng?mL^?1 (3S _b , n?=?10) and their preconcentration factor was 100, while their loading capacity was above 32.9?mg?g^?1 of SPIMP-MWCNT. The proposed method was successfully applied for the preconcentration and determination of analytes in different samples.     

Nitrogen‐Doped Carbon Dots: A Facile and General Preparation Method,Photoluminescence Investigation,and Imaging Applications

Carbon dots (Cdots) are an important probe for imaging and sensing applications because of their fluorescence property, good biocompatibility, and low toxicity. However, complex procedures and strong acid treatment are often required and Cdots suffer from low photoluminescence (PL) emission. Herein, a facile and general strategy using carbonization of precursors and then extraction with solvents is proposed for the preparation of nitrogen‐doped Cdots (N‐Cdots) with 3‐(3,4‐dihydroxyphenyl)‐L ‐alanine (L ‐DOPA), L ‐histidine, and L ‐arginine as precursor models. After they are heated, the precursors become carbonized. Nitrogen‐doped Cdots are subsequently extracted into N,N′‐dimethylformamide (DMF) from the carbogenic solid. A core–shell structure of Cdots with a carbon core and the oxygen‐containing shell was observed. Nitrogen has different forms in N‐Cdots and oxidized N‐Cdots. The doped nitrogen and low oxidation level in N‐Cdots improve their emission significantly. The N‐Cdots show an emission with a nitrogen‐content‐dependent intensity and Cdot‐size‐dependent emission‐peak wavelength. Imaging of HeLa cells, a human cervical cancer cell line, and HepG2 cells, a human hepatocellular liver carcinoma line, was observed with high resolution using N‐Cdots as a probe and validates their use in imaging applications and their multicolor property in the living cell system.