The dielectric properties of water in its different states of interaction

A tutorial on dielectric (relaxation) spectrometry of liquids is given in this article. Some methods of measuring complex (electric) permittivity spectra are briefly described. Results for water are presented and related to characteristic properties of the liquid structure and to models of the molecular dynamics, particularly as resulting from computer simulation studies. Dielectric spectra for aqueous solutions of low weight electrolytes, polyelectrolytes, small molecules, and polymers are discussed to illustrate effects of kinetic depolarization, structure saturation, as well as positive, negative, and hydrophobic hydration. Reference is also made to fluctuations in the hydrogen bond network of mixtures of water with liquids that are completely miscible with this unique solvent.     

A comparative quantum-chemical analysis of electronic structures and spectroscopic parameters of cycloalkanes and cyclopolysilanes

A comparative quantum-chemical analysis of the electronic structures and spectroscopic parameters of the cycloalkanes C₃H₆, C₄H₈, C₅H₁₀, and C₆H₁₂ and their silicon analogs Si₃H₆, Si₄H₈, Si₅H₁₀ and Si₆H₁₂ was performed in the framework of the SCF MO LCAO method in the INDO approximation. Qualitative interpretation of “abnormal” ionization potentials and energies of electronic absorption spectra of cyclopolysilanes has been given. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1105–1108, June, 1997.     

A Green's function approach to the photoelectron spectrum of bis(π-allyl)nickel[1]

The vertical ionization potentials of bis(-allyl)nickel (see (1) in Fig. 1) are calculated by means of the Green's function approach within a semiempirical INDO extension to the first transition metal series. The computed ionization potentials are in good agreement with an experimentally deduced assignment. In contrast to earlier theoretical and experimental studies, the 7a _u () level is predicted on top of the levels corresponding to the Ni 3d orbitals. Our approach leads to a complete assignment of the PE spectrum of (1) in the outer valence region.     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

羟基取代烷基苯磺酸盐界面扩张粘弹性质

研究了2-羟基-3,5-二癸基苯磺酸钠(C10C10OHphSO3Na)表面和正癸烷-水界面上的扩张粘弹性质, 考察了平衡时间对界面性质的影响. 研究结果表明, 羟基取代烷基苯磺酸钠具有十分特异的界面性质, 其扩张模量比一般表面活性剂大一个数量级, 达到平衡的时间较长, 形成的界面膜弹性较大. 界面张力弛豫测定结果表明, 平衡时界面上存在特征时间长达103 s的慢过程. 上述实验结果可能是由于羟基间形成氢键造成的.     

Dielectric relaxation of polystyrene with side-chain- and chain-end-labels

Polystyrenes with different concentrations of side groups with cyano groups were prepared and complex dielectric constants were measured in the range of the glass transition temperature and the frequency range of 10^–2–10⁷ Hz.The GPC and DSC measurements showed that the molecular weight of these polystyrenes was about 10500 g/mole and the glass transition temperatures were 89.5°C for all samples.The dielectric relaxation spectra obtained for the side group polystyrene labels and also the chain-end polystyrene labels prepared before [9] were analyzed to find out the degree of coupling of the chain-end and side-group labels with the cooperative reorientation of the polymeric matrix. The analysis of the spectra was carried out using the analysis method developed by Mansour and Stoll [6].The results obtained showed that both end- and side-group labels are strongly coupled with the segmental reorientation and relax with relaxation times longer than that of the segments.The value of logf _m = (logf _m(label)) – logf _m(matrix)) was obtained from the recently designed comparison diagram suggested by Mansour and Stoll [6, 14]. The value of logf _m depends on the label length in the case of chain-end labels.It was surprising to find that the side groups relax slower than the segments by only 0.9 decades. These results obtained implied that the label relaxes through a multistep relaxation mechanism of the side and end groups and not through a diffusion mechanism of the whole chain. In addition, the effective lengths of the relaxing units were determined using the empirical equation obtained before in the case of rodlike molecules in polyisoprene [7].     

Mineral–water interfacial structures revealed by synchrotron X-ray scattering

Chemical reactions occurring at the mineral–water interface are controlled by an interfacial layer, nanometers thick, whose properties may deviate from those of the respective bulk mineral and water phases. The molecular-scale structure of this interfacial layer, however, is poorly constrained, and correlations between macroscopic phenomena and molecular-scale processes remain speculative. The application of high-resolution X-ray scattering techniques has begun to provide substantial new insights into the molecular-scale structure of the mineral–water interface. In this review, we describe the characteristics of synchrotron-based X-ray scattering techniques that make them uniquely powerful probes of mineral–water interfacial structures and discuss the new insights that have been derived from their application. In particular, we focus on efforts to understand the structure and distribution of interfacial water as well as their dependence on substrate properties for major mineral classes including oxides, carbonates, sulfates, phosphates, silicates, halides and chromates. We compare these X-ray scattering results with those from other structural and spectroscopic techniques and integrate these to provide a conceptual framework upon which to base an understanding of the systematic variation of mineral–water interfacial structures.     

An analysis of the total ion-solvent encounter configuration of ClO 4 − and BF 4 − with Na+ and Li+ in water,studied by various nuclear magnetic relaxation times. Part 21

Proton relaxation rates of the solvent water in NaClO₄, NaBF₄, LiClO₄, and NiBF₄ solutions together with some self-diffusion coefficients are reported and interpreted in terms of structure-breaking effects.¹⁹F relaxation rates in⁷LiBF₄ and⁶LiBF₄ solutions in D₂O have been measured, and the relaxation contribution caused by⁷Li⁺ has been evaluated to give a cation-anion model pair distribution function.⁷Li relaxation rates in H₂O and D₂O are also reported, and conclusions concerning the hydration structure of Li⁺ have been drawn. The strong relaxation effects caused by the ions BF ₄ ^– and ClO ₄ ^– on²³Na⁺ and⁷Li⁺ have been subjected to a detailed analysis, and combined ion-solvent encounter configurations are presented which yield an electric field gradient strong enough to cause the observed effect.Part 1 was presented at the Faraday Discussion Ion-Ion and Ion-Solvent Interaction, Oxford, September 1977 (see ref. 1).     

Mechanical properties of SBR-networks: I. Determination of crosslink densities by stress-strain-measurements

The tube model is applied for the treatment of stress-strain measurements on SBR networks. It is shown that this theory allows the separation of crosslink and constraint contributions to the stress-strain behavior and, also, a reliable determination of crosslink densities. The consideration of dynamical contributions is discussed and a special numerical method is developed.     

偏氟乙烯／三氟乙烯共聚物介电松弛的结晶度效应

用改进的介电松弛谱仪（精度２‰）测定了ＶＤＦ／ＴｒＦＥ（７／２７、６５／３５、５２／４８ｍｏｌ％）共聚物溶液成膜、液氮淬火、熔融慢冷和热处理试样在－１２０—１３０℃、１０－２一１０４Ｈｚ范围的复数介电常数．介电松弛研究结果显示低结晶度的淬火试样较高结晶度的熔融慢冷和热处理试样的Ｔｃ高．结晶度上升，居里点处的介电常数增大．室温以下的介电频率谱分别由代表非晶区分子运动的β松弛（低频部）和局域运动的γ松弛（高频部）叠合而成．随结晶度提高，β松弛峰减小，γ松弛峰增大；非晶松弛强度减弱．晶区松弛强度增强．