Role of Ion exchange in permeation processes

The single ion transport of transition metal ions like Cu²⁺, Co²⁺, Ni²⁺ and Zn²⁺ were carried out through the H⁺ and alkali metal ion forms of Nafion membrane. These studies showed that the ion exchange selectivity coefficient of the permeating ion had an effect on its transport process. It was found that the diffusion coefficient values (D) were directly proportional to the selectivity coefficient (K). This shows that the initial stage of permeation is governed by ion exchange process (effect of K on D).     

Dielectric properties of beryllia ceramics in the near-millimeter wavelength range

We report the refractive indices and absorption coefficients for four beryllia (BeO) ceramic samples. These dielectric properties have been measured over the range from 4 to 18 cm^–1 by use of a Michelson interferometer. The index n, follows the linear relationship n=0.6517 cm³/g×+0.7130 with density, , over the range 2.8<<3.0 g/cm³.     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

色谱法测定乙醇扩散系数及乙醇深度氧化的内扩散影响

用脉冲色谱峰加宽非稳态法测定乙醇在Ｐｔ／Ａｌ２Ｏ３催化剂中４００－４８０℃之间的有效扩散系数。乙醇孔扩散活化能为５．４６ｋＪ／ｍｏｌ。当用０．４５－０．６０ｍｍ催化剂时，乙醇的完全氧化在动力学区域进行、氧分压过量时，此区域的反应速率遵循乙醇０．１级速度方程。     

用水合五氧化二锑分离放射性母子体的研究─—一个新的~(201)Pb—~(201)T1发生器的制备

本文研究了无机离子交换剂—水合五氧化二锑（Sb2O5·nH2O）的制备，并用它分离了放射性母子体，制备了一个新的201Pb—201Tl放射性发生器。结果表明，末发生器具有高效、快速、简便的特点，此外还讨论了离子交换反应的机理。     

超临界CO2中甲醇和乙醇无限稀释扩散系数的分子动力学模拟与实验测定

采用分子动力学模拟(MD)方法对甲醇和乙醇在超临界二氧化碳中的无限稀释扩散系数进行了模拟计算, 并应用泰勒分散理论, 采用超临界色谱仪对模拟结果进行了实验验证. 模拟计算值与实验值较吻合, 且变化规律基本一致, 表明采用这种新方法可以准确有效地预测超临界体系的扩散性质, 能够方便地应用于工程设计.     

Predictive models to describe VLE in ternary mixtures water + ethanol + congener for wine distillation

The modeling of liquid–vapor equilibrium in ternary mixtures that include substances found in alcoholic distillation processes of wine and musts is analyzed. In particular, vapor–liquid equilibrium in ternary mixtures containing water + ethanol + cogener has been modeled using parameters obtained from binary mixture data only. The congeners are substances that although present in very low concentrations, of the order of part per million, 10⁻⁶ to 10⁻⁴ mg/L, are important enological parameters [1] and [2]. In this work two predictive models, the PSRK equation of state and the UNIFAC liquid phase model and two semipredictive activity coefficient models: NRTL and UNIQUAC have been used. The results given by these different models have been compared with literature data and conclusions about the accuracy of the models studied are drawn, recommending the best models for correlating and predicting the phase equilibrium in this type of mixtures.     

NARROW-DISPERSED CROSSLINKED CORE-SHELL POLYMER MICROSPHERES PREPARED BY SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION＊

Grafting of polystyrene with narrowly dispersed polymer microspheres through surface-initiated atom transfer radical polymerization (ATRP) was investigated. Polydivinylbenzene (PDVB) microspheres were prepared by dispersion polymerization with poly(N-vinyl pyrrolidone) (PVP) as stabilizer. The surfaces of PDVB microspheres were chloromethylated by chloromethyl methyl ether in the presence of zinc chloride as catalyst to form chloromethylbenzene initiating core sites for subsequent ATRP grafting of styrene using CuCl/bpy as catalytic system. Polystyrene was found to be grafted not only from the particle surfaces but also from within a thin shell layer, resulting in the formation of particles size increased from 2.38-2.58μm, which can further grow to 2.93μm during secondary grafting polymerization of styrene. This demonstrates that grafting polymerization proceeds through a typical ATRP procedure with living nature. All of the prepared microspheres have narrow particle size distribution with coefficient of variation around 10%.     

Chloride distribution coefficient on strongly basic anion-exchange resin: Dependence on co-ion in alkali fluoride solutions

Summary The dependence of the chloride distribution coefficient on the co-ion of solutions of different alkali fluorides, MF, up to 11M is tested on the strongly basic anion-exchange resin AG1-X10. Under the same experimental conditions the distribution coefficient decreases in the following order for M⁺: Na⁺>K⁺>Rb⁺>Cs⁺. This can be explained by the different co-ion-chloride interactions. The consequence of this interaction for a chromatographic separation of chloride is shown with 5M KF and CsF solutions, used as eluants. Depending on the fluoride concentration, the distribution coefficient passes through a minimum value to increase again at higher electrolyte concentration. The non-exchange electrolyte in the resin phase is responsible for this effect. In addition, the bromide and the iodide distribution coefficients up to 10M KF solutions are determined. One results is that the selectivity coefficient between halide ions increases at higher electrolyte concentrations.