Analysis on acoustic characteristics of opposed multi-burner gasifier

Hilbert–Huang Transformation and Statistical Theory are used to analyze the impinging flame noise signals of a gasifier. The characteristic of the flame noise energy is studied by standard deviation and probability density, and frequency–time distribution is generated by the empirical mode decomposition (EMD) method and Hilbert spectrum. The results show that, in different conditions, the value of standard deviation of four burners impinging flame noise is greater than that of the two burners, but not for the probability density. The change of the standard deviation and probability density of four burners is smaller than that of two burners. It means that the flame of four burners combusts severely but stably. Under the condition of low feed and oxygen ratio, the two flame burner noise signals frequency and energy distribute mainly in 100 Hz regions; and four burners flame noise distribution is concentrated in the low-frequency bands below 45 Hz and the 45–100 Hz bands.     

Cross-relaxation and spectral broadening of gain for Nd/Cr:YAG ceramic lasers with white-light pump source under high-temperature operation

Spectral broadening of the fluorescence of a Nd/Cr:YAG ceramic at the 1064 nm lasing wavelength was observed, and the amplification properties at a high temperature were investigated by considering cross-relaxation. These ceramics are promising for use as a solid-laser material pumped with solar or lamp light. It has been found that whenever the temperature of a laser medium is high and a spectral shift occurs, a high small-signal gain remains owing to the broad spectral band and the cross-relaxation. This optical property is remarkably different from that of a Nd:YAG laser. For a conventional Nd:YAG laser, the bandwidth at 1064 nm is 0.45 nm, and a reduction in small-signal gain occurs at a temperature of 373 K because the spectral peak shift is 0.005 nm/K. However, for the Nd/Cr:YAG ceramic, the bandwidths are 1.2 and 1.9 nm in the case of 0.1% Cr ion doping and 3% Cr ion doping, respectively, owing to the existence of excited Cr ions and the shortening of the effective Nd ion coherence time. It is prospected that the laser medium can be used at a high temperature of 600 K.     

Phase noise suppression in a DPSK transmission system by the use of an attenuation-imbalanced NOLM

A nonlinear optical loop mirror (NOLM) imbalanced by attenuation has been used for the suppression of nonlinear phase noise in a DPSK transmission system. It has been experimentally shown that such a passive, NOLM-based regenerator can significantly improve the performance of a phase-encoded transmission when it is limited by nonlinear phase noise. A brief overview over the advantages und limitations of different NOLM-based phase-preserving amplitude regenerators is also given.     

Noise reduction by dynamic signal preemphasis

In this work we propose an approach to reduce the digitization noise for a given dynamic range, i.e., the number of bits, of an analog to digital converter used in an NMR receiver. In this approach, the receiver gain is dynamically increased so that the free induction decay is recorded in such an emphasized way that the decaying signal is digitized using as many number of bits as possible, and at the stage of data processing, the original signal profile is restored by applying the apodization that compensates the effect of the preemphasis. This approach, which we call APodization after Receiver gain InCrement during Ongoing sequence with Time (APRICOT), is performed in a solid-state system containing a pair of (13)C spins, one of which is fully isotopically labeled and the other is naturally abundant. It is demonstrated that the exceedingly smaller peak buried in the digitization noise in the conventional approach can be revealed by employing APRICOT.     

Hysteresis suppression improvement of polycrystalline silicon thin-film transistors by two-step hydrogenation

The effect of two-step hydrogenation, consisting of plasma hydrogenation and annealing in hydrogen, on the hysteresis phenomenon of metal-induced unilaterally crystallized silicon thin-film transistors (MIUC-Si TFTs) was investigated. The large hysteresis level of the conventional MIUC-Si TFTs caused a wide variation of the drain current with the previous gate voltage. As the plasma exposure time increased, the plasma hydrogenation commonly used for stability in poly-Si TFTs was found to increase the hysteresis level of MIUC-Si TFTs after a minimum point. This is because plasma-induced damages correlated with unique defects of MIUC-Si such as metal-related weak bonds, are accompanied by passivation. The following annealing repaired the damages. Consequently the hysteresis level was lower, which resulted in a narrower variation of the drain current.     

Shot noise suppression in a series graphene tunnel barrier structure

The shot noise properties in a graphene-based multi-quantum well structure are investigated theoretically. It is found that when the number of the potential barriers (quantum wells) is big enough and the width of the barriers and the wells is shorter than the mean free path, another Dirac-like point at which the Fermi energy equals half of the barrier height appears. The transport is almost forbidden at this new Dirac-like point, the conductivity gets the minimum, and the Fano factor approaches 1/3. With the random potential barrier being taken into consideration, the conductance enhances clearly, meanwhile the Fano factor is suppressed much more.     

Continuous symmetry reduction and return maps for high-dimensional flows

We present two continuous symmetry reduction methods for reducing high-dimensional dissipative flows to local return maps. In the Hilbert polynomial basis approach, the equivariant dynamics is rewritten in terms of invariant coordinates. In the method of moving frames (or method of slices) the state space is sliced locally in such a way that each group orbit of symmetry-equivalent points is represented by a single point. In either approach, numerical computations can be performed in the original state space representation, and the solutions are then projected onto the symmetry-reduced state space. The two methods are illustrated by reduction of the complex Lorenz system, a five-dimensional dissipative flow with rotational symmetry. While the Hilbert polynomial basis approach appears unfeasible for high-dimensional flows, symmetry reduction by the method of moving frames offers hope.     

Catalytic activity of carbon-supported iridium oxide for oxygen reduction reaction as a Pt-free catalyst in polymer electrolyte fuel cell

Iridium oxide supported on Vulcan XC-72 carbon black (IrO₂/C) as a cathode catalyst for polymer electrolyte fuel cell (PEFC) has been characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD) measurement. The IrO₂ particles were 8-160 nm in diameter. The oxygen electroreduction activity was studied by cyclic voltammetry (CV). It was found that IrO₂/C had high oxygen reduction reaction (ORR) activity. The performance of the membrane electrode assemble (MEA) was also tested in a single PEFC and showed that IrO₂/C catalyst would be potential candidates for use as cathode catalyst in PEFC.     

Electrocatalysis of oxygen reduction reaction on Nafion/platinum/gas diffusion layer electrode for PEM fuel cell

In this work a new membrane electrode based on Pt-coated Nafion membrane was fabricated. Chemical deposition process was used to coat platinum on Nafion 117 membrane and then Pt-coated Nafion membrane was hot pressed on gas diffusion layer (GDL) to make new membrane electrode. The electrochemical and chemical studies of the Pt-coated Nafions were investigated by electrochemical techniques, X-ray diffraction and scanning electron microscopy. The electrochemical results indicated that as the concentration of H₂PtCl₆ increased, the oxygen reduction reaction rate increased until the concentration was reached where the reduction reaction was limited by the problem of mass transport. The electrochemical results for oxygen reduction reaction showed that the new electrode which prepared by plating Nafion membrane with 0.06 M H₂PtCl₆ in electroless plating solution, has a higher performance than other electrodes. The XRD results showed that the average platinum particle size of the best sample was about 3 nm. The loading of platinum for this electrode was 0.153 mg cm⁻².     

Exploration of bimetallic Pt-Pd/C nanoparticles as an electrocatalyst for oxygen reduction reaction

In this study, carbon supported Pt and Pt-Pd were synthesized as oxygen reduction reaction electrocatalysts for polymer electrolyte membrane fuel cells (PEMFCs). Pt and Pt-Pd nanoparticles have been synthesized by reduction of metal precursors in presence of NaBH₄. Various techniques such as X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and scanning electron microscopy (SEM) were utilized to study the prepared samples. Furthermore, electrochemical properties of the prepared samples were evaluated from cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS). The results showed, the crystallite size of electrocatalysts (Pt and Pt-Pd) is below 10 nm. The higher catalytic activity was detected for Pt-Pd/C electrocatalyst for oxygen reduction reaction (ORR). In addition, it is believed that the better performance of electrocatalyst is related to the synergic effect between Pt and Pd nanoparticles, weakening of the OO bond on Pd-modified Pt nanoparticles in ORR, uniform dispersion of Pd and Pt on the carbon support and higher electrochemical active surface area (EAS) of Pt-Pd/C electrocatalyst.