船舶尾流散射光信号及一维离散小波分析

用自行设计的测试系统测量了不同航速下船舶尾流的散射光信号,并选用一维离散小波Dmeyer小波对散射光信号进行了5层小波分析.测量和分析结果表明,随着航速增大,船舶尾流散射光照度减小,尾流气泡幕逐渐增强,气泡幕中气泡密度、气泡运动规律、不同直径气泡分布均随之变化.气泡幕的增强可能存在饱和度,在航速增大到一定值时,气泡幕会达到一稳定的密度分布.从小波分析得到的第五层逼近信号来看,不同航速下主峰位置、主峰个数以及峰值差均不同,不同航速下散射光细节信号的第一层均具有一定周期性,航速10 km/h时表现出完美的周期性,出现类似于同方向不同频率简谐振动叠加而出现“拍”的现象.     

Application of audience-seats characteristics to the sound field analysis for large enclosures

The analysis of the sound field of a hall including the effect of audience seats has difficulties in computing time and memory. Although extensive investigations have been conducted for analyzing sound fields, there is scarcely any report dealing with the sound field including this effect. The main cause may be the complex shape and amount of materials of the audience seats. However, there is a possibility that periodical grooved structures like seat rows can be replaced by an appropriate imaginary boundary with an impedance of quasi-local reaction at the top of seats. The purpose of this research is to reduce the calculation load of acoustical analysis by treating the seat rows as an imaginary-impedance boundary which is almost equivalent to the characteristics of audience seats. The SDE filter, which can express excess attenuation caused by seat rows, is proposed and some applications to both the geometrical and wave theoretical methods are presented. To examine the validity of this method, some numerical examples calculated using an image method are discussed in comparison with the measured data. Furthermore, the numerical results of its application to the boundary element method are presented and discussed in terms of its effectiveness and validity.     

Analysis of a perforated panel for the correction of low frequency resonances in medium size rooms

This work illustrates an engineering approach for the analysis of plywood/fibreglass perforated panels, to be used for the linearisation of the frequency response of medium size rooms below 200 Hz. The sound absorption coefficient of these panels is computed, by means of coupled acoustical/structural finite element (FEM) analyses, as a function of the frequency. The comparison between the results given by a complete numerical model of the panel, and those provided by a simplified numerical model, in which only one hole and surrounding material (wood, air, and fibreglass) are described, shows that the second computational approach provides essentially the same results as the former one, at a quite reasonable cost. The FEM results allow us to understand some details about the air motion inside the panel, and to define suitable assumptions for the construction of a simplified analytical model of the panel. Both the numerical and the analytical results are finally compared to experimental data obtained by means of pressure-particle velocity measurements.     

Frequency stabilization of multiple semiconductor lasers using digital feedback loop

We propose and demonstrate a simple technique to stabilize the frequencies of multiple semiconductor lasers simultaneously using a Fabry-Perot etalon filter and a digital signal processing. Unlike other stabilization techniques, the proposed technique could stabilize DFB lasers using only one digital feedback control loop. The result shows that the proposed technique could maintain the frequency stability of 16 DFB lasers within ±150 MHz.     

Extraction of periodic signals in chaotic secure communication using Duffing oscillators

This paper presents a novel approach to extract the periodic signals masked by a chaotic carrier. It verifies that the driven Duffing oscillator is immune to the chaotic carrier and sensitive to certain periodic signals. A preliminary detection scenario illustrates that the frequency and amplitude of the hidden sine wave signal can be extracted from the chaotic carrier by numerical simulation. The obtained results indicate that the hidden messages in chaotic secure communication can be eavesdropped utilizing Duffing oscillators.     

Novel optical packet with non-return-to-zero label and duobinary carrier-suppressed return-to-zero payload

A novel packet format with non-return-to-zero (NRZ) label and duobinary carrier-suppressed return-to-zero (DCS-RZ) payload is proposed for optical packet switching networks.NRZ label is followed by DCS-RZ payload with a certain guard time.The spectra of the low-rate NRZ label locate around the optical carrier frequency where some parts of the corresponding spectra of the high-rate DCS-RZ payload have been suppressed due to DCS-RZ modulation.At the switching node,the label or payload extraction can be realized simply through an optical bandpass or notch filter respectively.The feasibility of the scheme is verified by the simulation on the famous photonic design platform designed by Virtual Photonics Inc.(VPI).The effects of optical filter bandwidth on the received signal quality are discussed by analyzing bit error rate(BER)and contrast ratio performances.     

适用于循环平稳声场的基于波叠加法的近场声全息技术

在原有的平面循环平稳近场声全息基础上，提出一种基于波叠加法的循环平稳近场声全息技术，可以对具有复杂表面的声源进行全息重建，重建的声源表面声压谱相关密度函数能反映出调制信号的信息.声源表面声压谱相关密度函数全息图形象地反映了调制信号在表面的强弱分布情况，可由此确定调制信号源的产生位置.仿真分析和实验验证表明，基于波叠加法的循环平稳近场声全息技术可以更准确地反映循环平稳声场的调制特性.该方法继承了波叠加法的优点，无需计算边界奇异积分，计算效率高、精度好.     

光强不均匀情况下曲率波前传感器的信号分析

曲率波前传感器广泛应用于天文自适应光学、光学度量等领域。在这些领域使用时都假设入射波前光强均匀，但这种假设与曲率传感技术的基本原理不一致。定性分析了曲率波前传感技术理论的不自洽，利用衍射理论和几何光学近似的方法，推导了光强不均匀情况下曲率渡前传感器信号的解析式，分析了信号误差。结果表明，光强不均匀情况下曲率波前传感器的信号引入了光强对数的梯度和波前梯度的点乘项。在大多数应用中，点乘项可以忽略，因此，光强均匀的假设是合理的。但应用于光强量级发生变化的激光高斯光束时，会有一定的误差。     

Three-dimensional optical logic devices using spatial multiwaveguide system

Based on the weakly coupled-mode theory, the coupled-mode equations of the spatial multiwaveguide system are presented in general. The intensity distribution in each waveguide is determined by numerical method. Optical logic devices based on spatial multiwaveguide system are proposed. The analysis results show that the spatial multiwaveguide system permits different Boolean logic states obtained by phase modulation.. Applications of the logic devices include optical calculation, optical interconnection, and spatial optical signal processing.     

基于经验模式分解的混沌干扰下谐波信号的提取方法

由混沌信号和谐波信号组合而成的复杂信号的分离方法一直受到关注.利用经验模式分解方法,依据任何信号由不同的固有简单振动模态组成的概念,将由混沌信号和谐波信号组合而成的复杂信号分离为不同的内在模态函数,并从中分解出谐波信号.通过利用Duffing方程产生的混沌信号进行的仿真实验,结果都表明该方法在一定参数范围内非常有效. 关键词： 经验模式分解 混沌 信号处理