Influence of strain on the magneto-exciton in single and coupled InP/GaInP quantum disks

We investigated theoretically the influence of strain on the exciton in both single and three vertically coupled self-assembled quantum dot systems in the presence of a perpendicular magnetic field. For the single disk, we find that the heavy-hole exciton is the ground state, while for the system of three stacked disks, the light hole state was found to be lower in energy. Results for the diamagnetic shift were compared with experimental results.     

Synthesis and antibody conjugation of magnetic nanoparticles with improved specific power absorption rates for alternating magnetic field cancer therapy

Bionized nanoferrite (BNF) particles with high specific power absorption rates were synthesized in the size range of 20–100 nm by high-pressure homogenization for targeted cancer therapy with alternating magnetic fields. Several strategies were used to conjugate antibodies to the BNF particles. These strategies were compared using an immunoassay to find optimal conditions to reach a high immunoreactivity of the final antibody–particle conjugate.     

加热炉内板坯粘塑性下桡变形的研究

在加热妒内，由于高温及重力作用，板坯两端的悬臂将产生下桡变形。悬臂越长，下桡将越大，导致悬臂下桡部分与出口端墙相碰，影响出料而造成事故。本文对加热炉内板坯的下桡变形进行了分析计算。首先，建立了板坯的二维非稳态导热模型并用有限差分法计算了炉内板坯随时间的温度变化；然后建立了板坯悬臂粘塑性变形模型，用有限元法计算了高温条件下由重力引起的悬臂的下桡变形。由此理论模型计算出的板坯抽出温度与悬臂端下桡量与实测结果吻合良好，说明该理论模型及模型计算方法是正确的，可用于对装钢生产进行指导。     

Dislocation unpinning model of acoustic emission from alkali halide crystals

The present paper reports the dislocation unpinning model of acoustic emission (AE) from alkali halide crystals. Equations are derived for the strain dependence of the transient AE pulse rate, peak value of the AE pulse rate and the total number of AE pulse emitted. It is found that the AE pulse rate should be maximum for a particular strain of the crystals. The peak value of the AE pulse rate should depend on the volume and strain rate of the crystals, and also on the pinning time of dislocations. Since the pinning time of dislocations decreases with increasing strain rate, the AE pulse rate should be weakly dependent on the strain rate of the crystals. The total number of AE should increase linearly with deformation and then it should attain a saturation value for the large deformation. By measuring the strain dependence of the AE pulse rate at a fixed strain rate, the time constantτ _s for surface annihilation of dislocations and the pinning timeτ _p of the dislocations can be determined. A good agreement is found between the theoretical and experimental results related to the AE from alkali halide crystals.     

Simulation of Vacuum Microelectronic Triode Made of Single Carbon Nanotube

Vacuum microelectronic triode performance, based upon a unit cell with a nanotube field emitter, gate, and anode, was evaluated via computer simulation. Electron emission was calculated from the modified Fowler-Nordheim equation. The dependence of emitted current, upon geometrical factors, e.g., nanotube radius, nanotube height, and gate's hole radius, is shown. The device design parameters of trans-conductance, and cutoff frequency have been calculated, which show that this structure can be used as a microwave and millimeter wave amplifier. Electron current flux is shown for time-dependent 1–Thz sinusoidal variation frequency input.     

Determination of the electric field gradient asymmetry from Berry’s phase in NQR of powder samples

An effect of Berry’s phase on the NQR spectrum of the rotating powder sample is described and applied for the determination of the electric field gradient asymmetry. The proposed method involves the analysis of the frequency singularities in the NQR powder patterns of the rotating samples. The Berry’s phases for the eigenstates, associated with an adiabatically changing quadrupole hamiltonian, are calculated for nuclei with a spin I = 3/2 and I = 1 as a function of the asymmetry parameter.     

ESTIMATE OF THE UPPER CRITICAL FIELD AND CONCENTRATION FOR SUPERCONDUCTOR

The effect of an applied magnetic field on an inhomogeneous superconductor is studied and the value of the upper critical magnetic field Hc3 at which superconductivity can nucleate is estimated. In addition, the authors locate the concentration of the order parameter, which depends on the inhomogeneous term a(x). Unlikely to the homogeneous case, the order parameter may concentrate in the interior of the superconducting material, due to the influence of the inhomogeneous term a(x).     

Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

Series solution to the laser-ion interaction in a Raman-type configuration

The Raman interaction of a ultracold ion trapped with two travelling wave lasers is studied analytically with series solutions, in the absence of the rotating wave approximation (RWA) and without restrictions of both the Lamb-Dicke limit and the weak excitation regime. The comparison is made between our solutions and those obtained under the RWA in order to demonstrate the validity region of the RWA. As a practical example, the preparation of Schr?dinger-cat states is proposed beyond the weak excitation regime, using our calculations. Received 12 March 2001 and Received in final form 16 October 2001