高频聚焦换能器声场的激光测量法

本文描述了一种使用激光测振技术测量高频聚焦换能器声场布的方法，并给出了使用该方法对一种高频聚换能器进行测量的结果，通过理论计算对结果的正确性进行了验证。     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

圆形面偶极层的静电势

讨论了圆形面偶极层静电势问题的正确解法,阐明了对于延拓法的正确理解,给出了有限间距时圆形平行板（分别带有异性面电荷）的静电势问题。     

关于三维各向同性谐振子径向矩阵元计算的讨论

根据广义Laguerre多项式的数学性质，导出了较为简单的三维各向同性谐振子径向矩阵元的普遍公式,并在这基础上计算了一些重要特殊情形的径向矩阵元: 矢径r整数次幂的平均值，电偶极跃迁矩阵元和电四极跃迁矩阵元. 关键词： 三维各向同性谐振子 径向矩阵元 广义Laguerre多项式 偶极跃迁 四极跃迁     

Elastic guided wave propagation in a periodic array of multi-layered piezoelectric plates with finite cross-sections

In this study, we present a model study of guided wave dispersion and resonance behavior of an array of piezoelectric plates with arbitrary cross-sections. The objective of this work is to analyze the influence of the geometry of an element of a 1D-array ultrasound transducer on generating multi-resonance frequency so as to increase the frequency bandwidth of the transducers. A semi-analytical finite-element (SAFE) method is used to model guided wave propagation in multi-layered 1D-array ultrasound transducers. Each element of the array is composed of LiNbO₃ piezoelectric material with rectangular or subdiced cross-section. Four-node bilinear finite-elements have been used to discretize the cross-section of the transducer. Dispersion curves showing the dependence of phase and group velocities on the frequency, and mode shapes of propagating modes were obtained for different geometry consurations. A parametric analysis was carried out to determine the effect of the aspect ratio, subdicing, inversion layer and matching layers on the vibrational behavior of 1D-array ultrasound transducers. It was found that the geometry with subdiced cross-section causes more vibration modes compared with the rectangular section. Modal analysis showed that the additional modes correspond to lateral modes of the piezoelectric subdiced section. In addition, some modes have strong normal displacements, which may influence the bandwidth and the pressure field in front of the transducer. In addition, the dispersion curves reveal strong coupling between waveguide modes due to the anisotropy of the piezoelectric crystal. The effect of the matching layers was to cluster extensional and flexural modes within a certain frequency range. Finally, inversion layer is found to have a minor effect on the dispersion curves. This analysis may provide a means to analyze and understand the dynamic response of 1D-array ultrasound transducers.     

一种纵扭复合换能器型超声马达的原理及实验研究

本文从纵扭振动换能器理论出发，计算了一种新的复合换能器型超声马达，并进行了实验研究，测出了其主要性能参数。     

用来激励高频超声换能器的电激励源

讨论了超声换能器的几种激励方法，分析了三种常用激励方法在激励高频超声换能器时的特点及其同局限性，我们雪崩ＭＡＲＸ电路制作的单极窄脉冲能地激励率高达１００ＭＨｚ的换能器并取得了较好的结果。     

一种低频大功率调频声波束扫描发射系统

本文介绍一种中心工作频率在４．５ｋＨｚ发射电功率８ｋＷ的１６基元线列阵发射系统，并介绍了使用ＤＳＰ５６００１数字信号处理产生线性调频扫描波束发射信号及接收信号的频域处理和和一些测试结果。     

基于最小电压法的超声换能器谐振频率自动跟踪*

首先分析了最大电流法跟踪超声换能器谐振频率的原理及应用范围。研究了基于由串联电感和并联电容匹配电路下,不同频率时换能器两端电压电流的变化规律。研究表明在串联电感和并联电容匹配电路下发生谐振时,换能器两端的电压最小而电流并非最大。由此形成了采用最小电压法跟踪谐振频率的自动跟踪策略,并给出了该方法的具体实施步骤。论文研究结果为换能器谐振频率的自动跟踪方法提供了新的选择。     

薄板声谐振子扰动的声学特征检测研究

为进行快速ＮＤＴ，研究了薄板声谐振子扰动和声学特征变化的关系，用有限元方法分析在睡无缺陷薄板的振动频率和振型。利用数字信号处理技术，实验研究了样品中缺陷对声学特征的影响。实现和理论分析结果一致性很好。研究结果有助于正确利用样品声学特征进行无损检测。