Investigation on ultrafast thrid—order optical nonlinearity of metal（dmit）2／mnt）2 Charge transfer complexes

We have investigated the transient third-order optical nonlinearity of the solutions of Metal(dmit)2/(mnt)2 salts in acetone by employing femtosecond optical Kerr gate measurement at 830nm wavelength.An order of enhancement on the second-order hyperppolarizability is found for the above salts with central atoms of Cu and Ni.We have suggested an explanation for the enhancement based on the extension of electronic conjugation by the entring Cu or Ni atom.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Preparation and characterization of poly(amidoamine) dendrimers functionalized with a rhenium carbonyl complex and PEG as new IR probes for carbonyl metallo immunoassay

The first poly(amidoamine) (PAMAM) dendrimers tethered with both (η⁵-cyclopentadienyl) rhenium tricarbonyl (CpRe(CO)₃) units and polyethylene glycol (PEG) chains were prepared and characterized by combining NMR spectroscopy and Fourier-transform IR spectroscopy. Grafting of CpRe(CO)₃ units was achieved by reductive amination of formyl-CpRe(CO)₃ with the peripheral amines of generation 3 and 4 PAMAMs to yield dendrimers labeled with a variable number of CpRe(CO)₃ units, ranging from 8 to 14 for PAMAM-G3 and 17-30 for PAMAM-G4. PEG chains of different lengths were then attached to some of the remaining peripheral amines, and their respective ability to improve the solubility of the metallodendrimers in aqueous buffered media was evaluated. These metallodendrimers represent new infrared probes designed to be coupled to immunological reagents for the amplification of the IR signal in carbonyl metallo immunoassay (CMIA).     

Optical and conductive properties of AlSi-alloy/SiCp composites: application in modelling CO2 laser processing of composites

The optical properties—reflectivity, real part of the refractive index, absorption coefficient as well as the thermal and electrical conductivity of AlSi-alloy/SiC_p composite were measured. The optical parameters and both conductivities decreased with the increase of SiC_p particles volume in AlSi-alloy matrix. This decrease was almost linear for the volume fraction of SiC_p particle up to 10 vol% of the total mass of the composite. For the 15 vol% of SiC_p particles, the departure from linearity is connected with the presence of additional phases in AlSi-alloy/SiC_p composite materials. The measured temperature dependencies of optical reflectivity and electrical conductivity for AlSi-alloy/SiC_p 15 vol% are of metallic character. Modelling of the interaction of the CO₂ laser radiation with AlSi-alloy/SiC_p 15 vol% composite should allow to estimate the initiation time at which the surface composite reaches melting temperature.     

Radiation heat transfer in axisymmetric quartz glass tubes

A mathematical model is proposed to describe the heat transfer in quartz glass axisymmetric tubes. Heat is transferred inside the glass by radiation and conduction. Scattering of thermal radiation inside the glass is ignored. At the boundaries of the tube the radiative intensity is specularly reflected. The spectral dependent radiative intensity and the temperature distribution inside the tube are determined. The model is applied to simulate the cooling process of a quartz glass tube. The calculated temperature is in agreement with that obtained from an experiment. Furthermore, steady-state temperature distributions in quartz glass tubes of different lengths have been determined.     

Pressure-induced polymorphism in enstatite (MgSiO3) at room temperature: clinoenstatite and orthoenstatite

The phase transition of a synthetic clinoenstatite in a diamond-anvil cell has been studied by using Raman spectroscopy at various pressures and room temperature. The phenomena observed in clinoenstatite have been compared with that observed in orthoenstatite. It is found that the pressure-induced phase transitions in the two enstatites are reversible, but with different transition pressures and transition behavior. An analysis of Raman spectra has revealed that the two enstatites have different high-pressure polymorphs. This result suggests that the space group of the high-pressure polymorph of orthoenstatite is not of C2/c, and that orthoenstatite and orthoferrosilite have different transition routes at room temperature and high pressure. The compressional behavior of the high-PC2/c enstatite is also discussed according to the pressure dependences of Raman frequencies.     

Ground state parameters of BiH3 from infrared and millimeter-wave spectra: ground state and equilibrium structures

Unstable, short-lived BiH₃ has been synthesized and investigated by rotational spectroscopy in the range 158 (J=1-0) to 1280 GHz (J=8-7). Quadrupole and spin-rotation hyperfine structures (eQq=584.676(96) MHz), and the A₁A₂ splitting of the K=3 ground state level, have been resolved. By merging the pure rotational data with 1764 ground state combination differences obtained from the analysis of high resolution Fourier transform infrared spectra of the ν₁-ν₄ bands [J. Mol. Spectrosc. (2004) (in press)] spanning J and K values up to 16 and 14, respectively, with 0?ΔK?9, the ground state rotational and centrifugal distortion constants up to octic and sextic terms for reductions A and B, respectively, have been determined. Of the reductions of the ground state rovibrational Hamiltonian, reduction B including ε rather than h₃ as off-diagonal element is clearly favored. An experimental r₀ structure of the very-near spherical oblate symmetric top BiH₃, r(BiH)=178.82 pm and α(HBiH)=90.320°, has been deduced from the rotational constants B₀=2.64160172(18) and C₀=2.6010403(31) cm⁻¹. The derived experimental r_e structure, r_e(BiH)=177.834(50) pm and α_e(HBiH)=90.321(10)°, was determined. This is in excellent agreement with the most recent ab initio structure, r_e(BiH)=177.84 pm, and α_e(HBiH)=90.12°.     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.     

Apparatus for High-Resolution Solid Hydrogen Matrix Isolation Spectroscopy and Its Application

Apparatus integrating a Fourier transform-infrared (FT-IR) spectrometer and a mid-infrared difference frequency generation (DFG) laser spectrometer was built for the study of the matrix isolation spectrum in solid molecular hydrogen. A 3-cm-long molecular hydrogen crystal was grown in a liquid-helium Dewar, and its infrared absorption spectrum in the 1-5 μm region was recorded to test the system. The W₀(0) (ν=0←0, J=6←0) line around 2410 cm⁻¹ of solid hydrogen was investigated with the DFG laser spectroscopy. High-resolution matrix isolation spectrum of CO² co-deposited with hydrogen on a BaF₂ cold plate at liquid-helium temperature was studied.     

Modification of multiwalled carbon nanotubes by carboxy groups and determination of the degree of functionalization

Multiwalled carbon nanotubes were modified by carboxy groups. Four independent methods for the determination of the degree of functionalization of the surface were proposed: ¹³C NMR spectroscopy, thermogravimetry, titrimetry, and fluorimetry. The first two methods show the total content of carboxy groups in the sample, and the latter two methods give information about the content of the surface groups only. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 291–295, February, 2008.