纤维素纳米晶体薄膜的制备与表征

讨论了两种新型纤维素纳米晶体(Cellulose nanocrystal,CNC)薄膜的制备方法:浸没法和旋涂法,并利用红外反射吸收光谱(Infrared reflection absorption spectroscopy,IRRAS)和原子力显微镜(Atomic force microscopy,AFM)对其进行表征。AFM高度图显示两种工艺制备的CNC薄膜均由棒状的CNC纳米颗粒交错叠加而成。实验结果显示,旋涂法制备的薄膜更加光滑,粗糙度RMS约为2.7 nm。由于带电颗粒间斥力的存在,浸没法制备的CNC膜厚度最大约为15 nm,而旋涂法可以得到更厚的CNC薄膜,其厚度可达50 nm以上。研究CNC悬浮液浓度与旋涂法CNC膜厚之间的关系后发现,可以通过改变CNC溶液的浓度对薄膜厚度进行控制。IRRAS结果也证实随着CNC悬浮液浓度的增加,旋涂薄膜的厚度随之增加。     

Nanocomposite structures of polypyrrole derivatives and poly (acrylonitrile‐co‐itaconic acid) produced by in situ polymerization as carbon nanofiber precursor

This study aimed to produce nanoparticles of poly (acrylonitrile‐co‐itaconic acid) (P (AN‐co‐IA)) containing conjugated polymers of pyrrole, N‐Methylpyrrole, 2,5‐dimethylpyrrole, and 1‐(Triisopropylsilyl)pyrrole which were synthesized by emulsion polymerization. Nanocomposite structures of P (AN‐co‐IA)/polypyrrole and polymer of pyrrole derivatives were produced via in situ polymerization, and the nanoparticle formation were followed by morphologic and ultraviolet‐visible (UV‐Vis) spectroscopic methods. Characterizations were made by Fourier transform infrared‐attenuated total reflectance (FTIR‐ATR) and Raman spectroscopy. Atomic force microscopy (AFM) was used for investigating the surface characteristics of the nanoparticles. Characterization results revealed that nanoparticles containing conjugated polymers had rougher surface than P (AN‐co‐IA) nanoparticles. It was also observed that the nanoparticles were well‐distributed although having some agglomerates. Moreover, depending on the type of monomer of conjugated polymer, the shape and size of the produced nanoparticles differed by conjunction with their polymerization rate. These findings can be used as a startup information for production of carbon nanofibers (CNFs) with desired properties after oxidation and carbonization, and as a high‐performance and cost‐effective flame and heat‐resistant material (oxidized copolymers of polyacrylonitrile nanofiber).     

Cooperativity of Catechols and Amines in High‐Performance Dry/Wet Adhesives

The outstanding adhesive performance of mussel byssal threads has inspired materials scientists over the past few decades. Exploiting the amino‐catechol synergy, polymeric pressure‐sensitive adhesives (PSAs) have now been synthesized by copolymerizing traditional PSA monomers, butyl acrylate and acrylic acid, with mussel‐inspired lysine‐ and aromatic‐rich monomers. The consequences of decoupling amino and catechol moieties from each other were compared (that is, incorporated as separate monomers) against a monomer architecture in which the catechol and amine were coupled together in a fixed orientation in the monomer side chain. Adhesion assays were used to probe performance at the molecular, microscopic, and macroscopic levels by a combination of AFM‐assisted force spectroscopy, peel and static shear adhesion. Coupling of catechols and amines in the same monomer side chain produced optimal cooperative effects in improving the macroscopic adhesion performance.     

Photoluminescence and atomic force microscopy studies on pre- and post-irradiated ruby with Fe3+ ion

Photoluminescence spectra measured for pristine ruby and its two irradiated samples with Fe³⁺ ion show R₁, R₂, N lines and a broad band. Decrease in intensities of these features is observed with irradiation of Fe³⁺ ion in ruby. Progressive structural changes and modifications on surface of irradiated rubies with Fe³⁺ ion have been observed by atomic force microscopy. Decrease in intensities is discussed in terms of pair formation.     

Effect of material selection and background impurity on interface property and resulted CIP-GMR performance

In this paper, we investigated the effect of background base pressure, wafer-transferring time between process modules, and stack layer material selection on the current-in-plane giant magneto-resistive (CIP-GMR) interface properties and the resulted CIP-GMR performance. Experimental results showed that seed layer/AFM interface, AFM/pinned layer (PL) interface, pinned layer/Ru interface, and reference layer (RL)/Cu spacer interface are among the most critical ones for a CIP-GMR device. By reducing the background impurity level (water moisture and oxygen), optimizing the wafer process flow sequence, and careful stack-layer material selection, such critical interfaces in a CIP-GMR device can be preserved. Consequently, a much robust GMR performance control can be achieved.     

Hydrogenation of Pd-capped Mg thin films prepared by DC magnetron sputtering

Structural and optical properties of pure Mg thin film coated with Pd have been investigated. Pd-capped Mg thin films had been prepared by DC magnetron sputtering. This work presents an ex situ study on hydrogenation and dehydrogenation kinetics of Pd/Mg films at different conditions using XRD, AFM and optical spectrophotometer. We have succeeded to load thin films of Mg to MgH₂ at normal temperature and normal pressure of hydrogen gas. In hydrogenation, α-MgH₂ phase of magnesium hydride was observed in hydrogenated films at 200 °C and γ-MgH₂ at 250 °C respectively. The desorption kinetics in vacuum also revealed the phase transformation α-MgH₂ to γ-MgH₂. A reflectance change was observed in hydrogenated films in comparison of as deposited thin film. Hydrogenated (H loaded) samples were observed partially transparent in comparison of as deposited.     

Anomalous scaling in surface roughness evaluation of electrodeposited nanocrystalline Pt thin films

Atomic force microscopy (AFM) is used to measure the surface roughness of crystalline Pt thin films as a function of film thickness and growth rate. Our films were electrodeposited on Au/Cr/glass substrates, under galvanostatic control (constant current density), from a single electrolyte containing Pt⁴⁺ ions. Crystalline structure of the films was confirmed by X-ray diffraction (XRD) technique. The effect of growth rate (deposition current density) and film thickness (deposition time) on the kinetic roughening of the films were studied using AFM and roughness calculation. The data is consistent with a rather complex behaviour known as “anomalous scaling” where both local and large scale roughnesses show power law dependence on the film thickness.     

Preparation of nano/micro-scale column-like topography on PDMS surfaces via vapor deposition: Dependence on volatility solvents

In this work, a column-like nano/micro-scale topography surface has been prepared via trichloro(octyl)silane (TCOS) vapor deposition on the air plasma oxidized polydimethylsiloxane (PDMSOx) surface. TCOS was mixed into n-heptyl alcohol and dimethyl-silicone oil to form a series of mixture. TCOS could anchor to the PDMSOx surface to form column-like nano/micro-scale topography while n-heptyl alcohol and TCOS volatilized to the PDMSOx surface in the subsequent vapor phase process. These surfaces were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared-attenuated total reflection, contact angle measuring system and atomic force microscopy. It was shown that TCOS had been successfully assembled on the polydimethylsiloxane surface. N-heptyl alcohol mixed into alkylsiloxane could regulate the scale and roughness of column-like nano/micro-scale topography.     

Experiments with a symbolic programming system for complex analysis

The paper reports the results of work on the construction of LISP programs for various symbolic operations in complex analysis, including the evaluation of integrals around closed contours by the use of Cauchy's Theorem. It is concluded that the only difficulty in the way of the preparation of programs for all of the important and useful textbook calculations in complex analysis is that large amounts of fast storage in the computer are needed.     

Optimization of Gold Nanoparticle-Based DNA Detection for Microarrays

DNA microarrays are promising tools for fast and highly parallel DNA detection by means of fluorescence or gold nanoparticle labeling. However, substrate modification with silanes (as a prerequisite for capture DNA binding) often leads to inhomogeneous surfaces and/or nonspecific binding of the labeled DNA. We examined both different substrate cleaning and activating protocols and also different blocking strategies for optimizing the procedures, especially those for nanoparticle labeling. Contact angle measurements as well as fluorescence microscopy, atomic force microscopy (AFM), and a flatbed scanner were used to analyze the multiple-step process. Although the examined different cleaning and activating protocols resulted in considerably different contact angles, meaning different substrate wettability, silanization led to similar hydrophobic surfaces which could be revealed as smooth surfaces of about 2–4 nm roughness. The two examined silanes (3-glycidoxypropyltrimethoxysilane (GOPS) and 3-aminopropyltriethoxysilane (APTES)) differed in their DNA binding homogeneity, maximum signal intensities, and sensitivity. Nonspecific gold binding on APTES/PDC surfaces could be blocked by treatment in 3% bovine serum albumin (BSA).