光隔离器

 光隔离器是光纤通信系统和精密光学测量系统中常用到的一种光学器件。在光路中,它的主要作用是阻止光被其他物体反射回来沿原路的传播,如图1所示,从端口①到②的正向光能顺利通过,而阻图1光隔离器的作用止从端口②到①的反向光。随着光通信技术的进一步发展和光电子材料研究热潮的兴起,光隔离器的用途越来越广泛。与此同时,人们对光隔离器的各项特性指标也提出了更高的要求。1.光隔离器的结构组成和工作原理光隔离器由两个线偏振器中间加一法拉第旋转器构成。它的工作原理如图2所示。方向可以这样决定:不管光的传播方向如何,迎着外加磁场的磁感应强度方向观察,偏振光总按顺时针方向旋转。     

Enhancing Isolated Ti（ Ⅳ ） Framework Sites in HMS

IntroductionTitanium modified mesoporous molecular sieves,such as Ti-MCM-41[1—4], Ti-HMS[5], Ti-SBA15[6, 7], and their catalytic performances havebeen investigated. Framework substitution and graftingtechniques have been employed for the preparation ofti…     

266nm脉冲激光光解基质隔离的cis-(NO)2

NO的氧化是大气化学研究的重要课题．CIS－（NO）。是一氧化氮氧化过程的中间体，对其在低温基质条件下的形成和氧化过程研究前文风已作了报导．H。WhiffS等门曾用中压汞灯作为光解光源（220－320urn），研究了ets－（NO）。在Ar低温基质中的光解，产物为N。O和NZO3．CIS－（NO     

基于单片机和光电开关的通用计数器设计

At presrent, the photoelectric switch is more and more widely used in the industrial automation equipment.It can be finished counting industrial products by using the characteristic of the photoelectric switch which can detect the objects without touching them. This design uses the modular design method,including power-supply module, The photoelectric conversion module, optocoupler isolation circuit module, power off protection module, matrix keyboard module, counting module and The display module. It mainly uses 51 single-chip microcomputer to control the system,uses the keilC51 software to design program,uses the Proteus software to complete the simulation. Through the experiment, it proves the design is feasible.     

关于子基的连通性的注记

在粗糙集理论研究中,覆盖方法的应用越来越受重视,其中最重要的概念是最近引进的拓扑空间的子集关于子基的内部和闭包以及由它们导入的关于子基的开集、闭集.对由它们导入的拓扑空间关于子基的隔离子集、连通性作进一步研究,所得性质是一般拓扑空间中隔离子集和连通性相应结果的推广.     

基于现场总线的高隔离度可调直流电源嵌入式控制器设计

模块级联是用于绝缘实验所需的高性能对称双极型矩形波脉冲电源的一种方法,为实现级联,需要有能够协调工作的高隔离度直流电源。设计出嵌入到各电源的板级嵌入式控制器BEC,使各BEC作为从节点利用RS485接口和ModBus协议与嵌入式主控制器EHC构成一个主从式现场总线网络,并在主节点EHC的控制下协调工作。利用BEC内的STM32F103C8处理器产生隔离DC-DC桥的互补PWM控制信号和高隔离输出电压,并进行电流和输出电压的隔离检测。由基于电流切换的变参数增量式数字PI算法来确定脉冲宽度值,产生Buck调压电路的闭环PWM控制信号,实现输出电压的调压和稳压控制。实验结果表明该嵌入式控制器能够满足级联式对称双极型矩形波脉冲电源对高隔离度可调直流电源的需要。     

140 GHz回旋管准光模式变换器的设计（英）

针对一种由Denisov型辐射器和第一面镜为准抛物镜的四级反射镜面系统组成的准光模式变换器开展了详细的研究和设计。利用耦合模理论和矢量绕射理论设计了波纹波导准光模式变化器,通过编写仿真程序进行数值优化完成了140 GHz,TE28,8回旋管准光模式变换器的设计。仿真结果表明,抛物面反射镜的焦距对矢量高斯效率影响较大,输出窗口处得到了较好的高斯波束,标量高斯效率达到98%,矢量高斯效率达到90%。     

Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments

Copolymers with super segregated structure of hydrophilic methoxy poly（ethylene glycol） （mPEG） and fluorophilic poly（1H,1H,2H,2H-perfluorodecyl acrylate） （PFA） were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope （TEM） showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It＇s finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments.     

Menger空间的收敛性和隔离性

Suppose that (X,F,△) is a Menger spece and that t-norm △ satisfies (?)△(x, a) = a for all a∈[0,l]. The main result of the paper is as follows:     

一种宽输出低纹波开关电源

研制一种由全桥PWM变换器、电压电流双环控制、纳米晶磁芯高频变压器和全桥整流、LC滤波器组成的单相输入、脉宽调制变换器型稳压电源。输出电压为1～100V，最大电流达100A，输出纹波小于0．1％。实现了某工程试验点火对电源的要求。