停流流动注射—动力学方法多组份同时测定的研究：铁（Ⅱ）,钛（Ⅲ）和…

依据诱导反应原理，提出了同时测定多组份的动力学方法，并以停流流动注射分析研究了Ｆｅ（Ⅱ），Ｔｉ（Ⅲ）及Ｖ（Ⅳ）诱导的Ｃｒ（Ⅵ）－Ｉ＾－反应体系，建立了铁，钛和钒同时测定的条件。对铁，钛和钒测定的线性范围分别为０－２．２μｇ／ｍｌ，０－３．１μｇ／ｍｌ及０－１．８μｇ／ｍｌ，检测限分别为０．０１２，０．０２０和０．０１８μｇ／ｍｌ。     

New Approach to Detecting Phenoxyl Free Radicals Generated in Enzyme Reaction by Stopped-flow Spectrophotometry

Quantification of free radical formation is critical for evaluation and interpretation of many radical-mediated biological processes1-4. Numerous studies have been devoted to the determination of free radicals, but the most of the reports have been focuse…     

压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。     

BAYER COUNTER CURRENT SYSTEMS IN COMPARISON WITH CONVENTIONAL CO—CURRENT SYSTEM IN THE FIELD OF WATER TREATMENT

From an economical point of view both the quality of the ion exchange resins and the technology used in the field of industrial water treatment are important for a successful performance.In general,two different technologies have been established on the market:The main differneces between the CO-and counter current technologes will be discussed and data concerning the requirement of chemicals for regeneration and the quality of the deionized water will be opposed.In addition several different varieties of the modern counter current technologies,developed and patented by Bayer AG,will be described and the advantages,depending on the application and the demand on the quality of the deionized water,pointed out .In view of stronger regulations concerning the consumption of regeneration chemicals,and waste water,and also because of the superior quality of the produced water,the market share of counter current technologies will continue to increase world-wide.     

Identification of Different Cobalt Nucleation on Glassy Carbon

The nucleation mechanisms of cobalt from sulfate solutions were studied by utilizing the electrochemical technique, chronoamperometry. It was found that the recorded current-time transients introduced from 1.0mol/L CoSO4 solution were complexes with unusual shapes. All characteristic features were identified as separate process. The instantaneous or progressive nucleation with 2D or 3D growth exists during the cobalt deposition, depending on the applied potentials.     

聚氧化乙烯(PEO)/聚双酚A羟基醚(PBHE)共混体系的非等温结晶动力学

本文联系Avrami方程和Ozawa方程,得出一个适合于非等温结晶动力学过程的新的基本方程,由这个方程可获得描述非等温结晶动力学过程的某些参数,并用DSC方法,对PEO/PBHE共混体系的非等温结晶动力学进行了研究,对实验结果进行了讨论.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

曲率流的参数化有限元逼近

许多物理现象可以在数学上描述为受曲率驱动的自由界面运动,例如薄膜和泡沫的演变、晶体生长,等等.这些薄膜和界面的运动常依赖于其表面曲率,从而可以用相应的曲率流来描述,其相关自由界面问题的数值计算和误差分析一直是计算数学领域中的难点.参数化有限元法是曲率流的一类有效计算方法,已经能够成功模拟一些曲面在几类基本的曲率流下的演化过程.本文重点讨论曲率流的参数化有限元逼近,它的产生、发展和当前的一些挑战.     

射流冷却下氧化二叔丁基瞬时热解反应的研究

采用射流冷却和高温瞬时热解技术研究了过氧化二叔丁基产物的质量分布和飞行时间谱。ＤＴＢＰ解离率与热解温度的关系表明，１３００Ｋ时ＤＴＢＰ全部解离。     

锂离子电池负极合金CoSn和Cu-Sn的制备与表征

CoSn alloy and Cu-Sn samples were synthesized by H₂-reduction following solid-state reaction between Co(Ⅱ)， Cu(Ⅱ)， Sn(Ⅳ) and NaOH at ambient temperature. The samples were characterized by XRD， SEM. The results showed that CoSn alloy (80～200nm) is globe-shaped， ultrafine hexagonal material， and Cu-Sn alloy powder consists of two phases， i.e. Cu₆Sn₅ and Cu₃Sn. Cu-Sn powder has spherical morphology and the particle size is estimated to be 60～70nm. The electrochemical performances of CoSn alloy and Cu-Sn powder were studied using lithium-ions model cell Li/LiPF₆ (EC+DMC)/CoSn (or Cu-Sn). It was demonstrated the reversible discharge capacities for 10 cycles keep above 280mAh·g^-1 for nanophase Cu-Sn， and 60mAh·g^-1 for CoSn alloy. Differ-ential capacity plots showed that the reaction mechanisms of Cu-Sn with lithium were reversible.