A Facile Synthesis of Silver-Coated Composite Particles by Swelling Surface Method

We report a facile and rapid method for fabrication of composite particles consisting of a polystyrene (PS) core and a uniform silver shell. The process involves the PS colloid surface swelling, the anchoring of silver ions and nanoparticles onto the surfaces, and the subsequent growth of metal seeds in a short period. The present approach has the advantages of simplicity and high efficiency. The TEM images show the morphology of the obtained PS core-silver shell particles, and their chemical composition and crystallinity are analysed by x-ray diffraction. To our knowledge, this is the first study based on swelling PS surface for synthesis of silver-coated PS particles and may be implemented for preparing other metal-coated PS particles.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

薄铝埋点等离子体K线光谱半定量诊断

高温等离子体系统中存在等离子体流体力学运动演化过程、离子的离化分布演化动力学过程、高剥离态离子谱发射过程及发射芬光辐射输运过程等，而且高温等离子体系统通常是非平衡系统，所以定量研究高温等离子体系统的发射X光谱和高温等离子体对X光的吸收是一个非常复杂的问题。为了模拟和解释实验测得的激光等离子体发射光谱，提出了一种薄埋点靶：直径为φ200μm厚度为0．1μm的铝点埋在20μm厚的CH膜底衬中，表面再覆盖0．1μm厚CH膜。     

脉冲放电等离子体烟气脱硫脱硝工业试验

脉冲放电等离子体烟气治理技术具有流程简单，一次投资成本低，无二次污染，可同时脱硫脱硝，形成的副产物可回收利用等特点。     

波片复合旋光器研究

利用矩阵光学方法，分析了波片复合旋光器的理论基础，给出了二元和三元复合波片旋光器的条件及其旋光角的大小的数学表达式，并根据此理论作了典型设计。结果表明，旋光角的大小与各波片的延迟量和它们的快轴同X轴的夹角有关。     

Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

Analytical Study of Nonlinear Dust Acoustic Waves in Two-Dimensional Dust Plasma with Dust Charge Variation

The nonlinear dust acoustic waves in two-dimensional dust plasma with dust charge variation is analytically investigated by using the formally variable separation approach. New analytical solutions for the governing equation of this system have been obtained for dust acoustic waves in a dust plasma for the first time. We derive exact analytical expressions for the general case of the nonlinear dust acoustic waves in two-dimensional dust plasma with dust charge variation.     

Three-Step Predictor-Corrector of Exponential Fitting Method for Nonlinear Schroedinger Equations

We develop the three-step explicit and implicit schemes of exponential fitting methods. We use the three- step explicit exponential fitting scheme to predict an approximation, then use the three-step implicit exponential fitting scheme to correct this prediction. This combination is called the three-step predictor-corrector of exponential fitting method. The three-step predictor-corrector of exponential fitting method is applied to numerically compute the coupled nonlinear Schroedinger equation and the nonlinear Schroedinger equation with varying coefficients. The numerical results show that the scheme is highly accurate.     

12kW二极管泵浦激光模块

二极管泵浦固体激光器（DPL）具有寿命长、热负载小、结构紧凑等优点，在工业加工、军事、通讯等领域都得到了广泛的应用。在高光束质量、高平均功率DPL激光器的研究中，目前普遍采用MOPA结构的光路布局——由谐振腔产生出低功率的单横模激光输出，经多路放大后达到满足需求的功率水平。而激光放大模块作为放大光路中的核心部件，其增益分布特性将直接影响到光束放大过程中的波前变化，因此如何在提高激光放大模块储能的同时提高模块增益分布的均匀性，从而减少光路放大过程的波前畸变，对于进一步研制高平均功率、高光束质量的半导体泵浦固体激光器具有非常重要的意义。     

一维粗糙表面散射特征的数值分析

使用Monte Carlo模拟的方法得出了随机粗糙表面，在Kirchhoff近似的基础上，利用数值分析的方法分析了一维随机粗糙表面的散射特征，得出了一维随机粗糙表面散射分布曲线，我们还考虑了遮蔽效应的影响，并且讨论了Kirchhoff近似的有效性。