现代物理信息

 NATURE《自然》1991年.1.G.J.Fishman等《用长时间曝光设备在宇宙飞船表面观测⁷Be》349卷6311期沿轨道运行的人造卫星上的长时间曝光设备,在空间差不多6年,最近返回地球,从放射性的测量中,在长时间曝光设备的前沿,找到了一定数量的同位素⁷Be.本文的测定,可以把⁷Be作为外大气层示踪物以及空间表面相互作用研究的应用.     

不同羧酯化的聚马来酸十八醇酯齐聚物的镉盐LB膜成膜特…

由聚马来酸酐和十八醇合成了一系列不同羧酯比的聚马来酸十八醇酯，并以其为成膜材料，ＣｄＣｌ２水溶液为亚相制备了一系列聚马来酸十八醇酯镉盐ＬＢ膜，借助小角Ｘ射线衍射和红外吸收光谱表征了成膜条件及羧酯比对ＣｄＰＭＡ膜有序结构的影响。在较高膜压和快速提拉条件下，低羧酯比的ＣｄＰＭＡ可得到有序性很高的Ｙ－型ＬＢ多层膜；高羧酯比的ＣｄＰＭＡ得不到高有序性的ＬＢ多层膜。     

大肠杆菌HB101感受态细胞的显微观察与分析

对数生长前期的大肠杆菌在生理盐水中用CaCl2可以直接诱导建立感受态并完成转化过程。利用H－8100透射电子显微镜观察用CaCl2直接在生理盐水中诱导建立感受态的大肠杆菌细胞，发现感受态细胞整体电子密度趋于均匀，但存在有电子密度较高颗粒，表明大肠杆菌感受态建立过程中，细胞整体对电子通透性增强，可能存在涉及细胞膜通透性的复合物重新形成相关的胞内物质代谢及其在细胞内定位的受控改变，暗示大肠杆菌可能具有建立自然感受态的能力。     

α-卤代萘与叔己酮碳负离子在Co(Ⅱ)络合物催化下的自由基链式亲核取代反应产物的薄层色谱定量分析

研究了以Co(Ⅱ)络合物为催化剂,α-卤代萘与叔己酮碳负离子的自由基链式亲核取代反应(SRN1)产物α-萘基叔己酮的薄层色谱扫描定量分析方法;定量分析的线性范围为0～4.4μg,平均回收率99%～101%,异板间相对标准偏差为2.3%,同板相对标准偏差为1.6%.     

增透膜的原理及常见问题的解答

增透膜也称减反膜，即能够减少反射光，增加透射光的薄膜．笔者在此简单分析一下光学镜头中所用的增透膜．     

SiCp/Y112铝基复合材料制备工艺及性能

3种不同铸造工艺条件下铝基复合材料的微观组织,并对其硬度进行了测定.研究表明:与全液态铸造法和半固态铸造法相比,搅熔铸造制备的SiCp/Y112铝基复合材料,其增强相SiC颗粒分布均匀,气孔率较少.是一种较理想的金属基复合材料制备工艺.未增强的Y112基体铝合金的维氏硬度高于其半固态坯料的维氏硬度;而SiCp/Y112铝基复合材料的维氏硬度明显高于基体的维氏硬度,并随着SiC颗粒的体积分数的增加其复合材料的维氏硬度不断提高.     

STABLE SOLUTION OF TIME DOMAIN INTEGRAL EQUATION METHODS USING QUADRATIC B-SPLINE TEMPORAL BASIS FUNCTIONS

This paper is concerned with stable solutions of time domain integral equation （TDIE） methods for transient scattering problems with 3D conducting objects. We use the quadratic B-spline function as temporal basis functions, which permits both the induced currents and induced charges to be properly approximated in terms of completeness. Because the B-spline function has the least support width among all polynomial basis functions of the same order, the resulting system matrices seem to be the sparsest. The TDIE formula-tions using induced electric polarizations as unknown function are adopted and justified. Numerical results demonstrate that the proposed approach is accurate and efficient, and no late-time instability is observed.     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.