An Improved Synthesis of Retinoic Acid from β-Ionone

A convenient and large-scale preparation of retinoic acid 1 from β-ionone in five steps with 38% overall yield is described.The key steps are the epoxidization of 2 with a new methylated agent and the condensation 4 with tetraethyl methylenediphophonate in one-pot procedure to prepare 6.     

Emittance Measurements for Beams Extracted from LECR3 Ion Source

High quality ion beams are required by IMP cyclotron and atomic physics research, so it is important to research and measure beam emitt ance of ECR ion source. Intense beams extracted from ECR ion source usually have low energy, so it is suitable to use Electric-Sweep Scanner to measure the emittance. This kind of measurement is popularly used at ECR ion source, and it has some prominent merits such as high accuracy, very short time of data processing and easy expressing of the emittance pattern. So we designed and built this emittance scanner to measure emittance of the ion beams produced by LECR3 ion source. The structure of the ESS is shown in Fig.l, and the photo of the ESS is shown in Fig.2.     

Light-Gradient-Induced Spiral Wave Drifts in a Belousov-Zhabotinsky Reaction

The dynamic behaviour of spiral tip in the light-sensitive Belousov-Zhabotinsky reaction under the influence of an externally applied light gradient was experimentally studied. The gradient causes different drifts for different spiral patterns. The centre of the spiral wave moved toward the region of lower light intensity. The direction of an additional perpendicular drift depended on the chirality of the spiral wave. The dependences of the drifting angle and the drifting velocity on light gradient have been measured.     

免疫珠技术快速检测腹泻性大肠杆菌

采用表面光滑玻璃珠作为载体材料，用1：40的腹泻性大肠杆菌诊断血清进行包被。可制成免疫珠。这种免疫珠能与腹泻性大肠杆菌发生特异性结合。经乳糖蛋白胨培养液培养，然后根据其产酸产气进行判断。能在18h内完成腹泻性大肠杆菌的检测。其灵敏度为样液中含有腹泻性大肠杆菌数必须大于10CFu／mL．该法简单、快速、易操作、灵敏度高。     

氟化类金刚石薄膜的拉曼和红外光谱结构研究

关键词：     

α，ω-二羧基-甲基丙烯酸丁酯低聚物的合成及MS分析

利用传统自由基聚合法，在四氢呋喃溶液中自由基引发聚合甲基丙烯酸丁酯单体而得到ω-羧基-甲基丙烯酸丁酯低聚物(CTBMA)(分子量在1500左右)；利用CTBMA末端酯基的反应特性，在二氧六环／水／KOH混合溶液中皂化CTBMA，使之转化为α，ω-羧基甲基丙烯酸丁酯低聚物(di-CTBMA)；研究了溶剂的类别、反应时间等反应条件对皂化产物结构的影响；利用MALDI-TOF-MS及LSIMS对皂化各阶段产物进行了分析监测．实验表明，在适当的皂化条件下，CTBMA皂化时主要为末端酯基转化为羧基，相应得到的产物di-CTMBA具有很好的结构特性，其官能团度(functionality)接近2．     

P(α,α′)πN反应中N(1440)激发的蒙特卡罗研究

在P(α,α′)πN反应的几种反应机制中研究N^*(1440)激发, 利用蒙特卡罗模拟的办法重现N^*(1440)共振峰的位置, 我们在给定入射能量情况下模拟出末态各出射粒子的动量, 角分布情况. 计算结果可以在πN的不变质量谱中观察到明显的N^*(1440)共振峰, 同时达里兹图中在πN系统能量平方为2100MeV²附近事件分布密集, 而别的组态却没有观察到这些情况, 这都说明了πN共振粒子N^*(1440)的产生.