射流对工业炸药的引爆及侵彻机制

本文用脉冲X光摄影技术及电探极-记录仪系统,对射流引爆及侵彻工业炸药的过程进行了观测,探讨了的流引爆及侵彻工业炸药的机制,给出了射流与工业炸药作用过程的物理图象。     

逆向环形分布射流迴流特性的数值计算

数值计算表明,逆向多环形分布射流可造成颗粒能直接进入,并能进行强烈的动量、能量交換的理想的迴流区结构。多环形结构可在大范围內造成所需尺寸的迴流区。逆向射流和主流速度比、环直径、射流直径和孔数、环的结构形式及离燃烧室进口的距离是影响迴流特性的主要参数。     

间隔靶对射流侵彻影响的数值模拟和实验研究

对某聚能装药射流侵彻靶板的过程进行了数值模拟 ,得出其碰撞点附近应力分布与传统理论相符 ,侵彻深度与实验结果及工程计算结果基本相符 ;分别对该聚能装药侵彻连续靶和间隔靶的过程进行了数值模拟 ,数值模拟结果显示间隔靶的侵彻深度明显低于连续靶的侵彻深度 ,这说明侵彻开坑阶段的能耗侵深比远大于准定常阶段。为了验证间隔靶对射流侵彻的影响 ,用另一聚能装药分别对连续靶和间隔靶进行了侵彻实验 ,并排除了炸高的影响。实验结果也表明 ,间隔靶对射流侵彻的确存在着不利影响。还结合数值模拟及实验结果对传统的侵彻公式进行了修正。     

提高压电射流角速度传感器性能的途径

报导了提高压电射流角速度传感器性能的途径.通过改进结构和工艺提高了压电射流角速度传感器的零位重复性、稳定性,减低了交叉耦合.实验结果表明零位重复性从原来的0.2(°)/S提高到0.1(°)/S,交叉耦合从原来的2%减小到1%.     

真实火箭射流冲击流场中激波结构的实验研究

本文采用一种有效的激光-莫瑞光栅干涉系统首次拍摄到真实火箭燃气射流冲击流场的激波结构.解决了长期以来无法拍摄到高温、高速、强火焰光的火箭射流流场图像的问题。利用这一系统,研究了射流冲击流场中激波结构的一些变化规律,发现了一些新的激波结构。较系统地研究了欠膨胀射流冲击各种锥体的激波形态。     

Comparative study of kinetic modeling for the oxidative coupling of methane by genetic and marquardt algorithms

Overall kinetic studies on the oxidative coupling of methane, OCM, have been conducted in a tubular fixed bed reactor, using perovskite titanate as the reaction catalyst. The appropriate operating conditions were found to be: temperature 750-775 ℃, total feed flow rate of 160 ml/min, CH4/O2 ratio of 2 and GHSV of 100 min-1. Under these conditions, C2 yield of 28% was achieved. Correlations of the kinetic data have been performed with lumped rate equations for C2 and COx formation as functions of temperature, O2 and CH4 partial pressures. Six models have been selected among the common lumped kinetic models. The selected models have been regressed with the experimental data which were obtained from the Catatest system by genetic algorithm in order to obtain optimized parameters. The kinetic coefficients in the overall reactions were optimized by different numerical optimization methods such as: the Levenberg-Marquardt and genetic algorithms and the results were compared with one another. It has been found that the Santamaria model is in good agreement with the experimental data. The Arrhenius parameters of this model have been obtained by linear regression. It should be noted that the Marquardt algorithm is sensitive to the first guesses and there is possibility to trap in the relative minimum.     

Fischer-Tropsch synthesis by nano-structured iron catalyst

Effects of nanoscale iron oxide particles on textural structure, reduction, carburization and catalytic behavior of precipitated iron catalyst in Fischer-Tropsch synthesis (FTS) are investigated. Nanostructured iron catalysts were prepared by microemulsion method in two series. Firstly, Fe2O3, CuO and La2O3 nanoparticles were prepared separately and were mixed to attain Fe/Cu/La nanostructured catalyst (sep-nano catalyst); Secondly nanostructured catalyst was prepared by co-precipitation in a water-in-oil microemulsion method (mix-nano catalyst). Also, conventional iron catalyst was prepared with common co-precipitation method. Structural characterizations of the catalysts were performed by TEM, XRD, H2 and CO-TPR tests. Particle size of iron oxides for sep-nano and mix-nano catalysts, which were determined by XRD pattern (Scherrer equation) and TEM images was about 20 and 21.6 nm, respectively. Catalyst evaluation was conducted in a fixed-bed stainless steel reactor and compared with conventional iron catalyst. The results revealed that FTS reaction increased while WGS reaction and olefin/paraffin ratio decreased in nanostructured iron catalysts.     

两亲性树枝形聚合物微反应器在光化学反应中应用研究

树枝形聚合物是一种结构独特的大分子,其内部存在的空腔可以容纳底物分子,近年来作为一类新型的微反应器引起广泛重视.在这些研究中,具有亲水外围基团和疏水内层骨架的两亲性树枝形聚合物因其溶解于水可以提供类似胶束的限制性微环境而备受关注,这种树枝形聚合物也被称为"静态单分子胶束".疏水小分子包裹在这类树枝形聚合物内部空腔溶解在水溶液中,由于树枝形聚合物内部微环境的影响,这些有机小分子表现出与其在均相水溶液或其它介质中不同的光物理和光化学性质.     

大气压等离子体射流重整CH4-CO2制合成气

采用大气压等离子体射流,以CH₄和CO^₂直接作为放电气体进行常压下重整制合成气的实验研究,考察了等离子体射流的放电特征及放电距离、放电功率、原料气配比和流量对反应的影响。结果表明,该等离子体具有放电稳定、均匀的特征。重整反应的主要产物为合成气,只有少量的H₂O和积炭生成。优化的反应条件为放电距离为9mm,CH₄和CO₂的摩尔比为4/6。当原料气流量为1000mL/min,放电功率为88.4W时,CH4和CO₂的最高转化率为分别为94.99%和87.23%。甲烷和二氧化碳的转化率随放电功率的增加而增加,随流量的增加而减少。     

水泥土搅拌桩复合地基承载力公式中折减系数β取值的分析

水泥土搅拌桩复合地基承载力设计公式中的桩间土承载力折减系数 β值需根据经验确定,且取值范围较大。因此,要准确计算出复合地基承载力有一定难度。本文根据桩土共同作用机理,探讨了折减系数 β的各种影响因素。在比较研究了一些典型工程静载试验的实测资料之后,对系数 β的取值作了具体分析并给出了合理的建议值。